I checked with Erickson and their Removable Motorcycle Wheel Chock item #EM07506 does not have a weight rating. It is made of steel and works with bikes that have up to 6" tires. So long as your Honda and Kawasaki do not…

Hey Nick, the Trimax Trailer Wheel Chock and Lock #TMX75FR you're looking at will work with your 175/80r13 trailer tires. This lock has measures 6" wide when closed and 10 1/2"…

You can replace the Lippert Rhino pin box on your Brinkley 5th wheel. The right one though is going to depend on the pin weight of your trailer. Here are the options that will work to replace the Lippert Rhino: - Pin Weight of 1,500 lbs - 3,500…

I recommend installing the Thule WingBar Evo roof rack on your 2024 Toyota Camry. I prefer this roof rack as the crossbars use a 2 piece channel seal which makes it easy to slide in a Kayak Carrier #LR28FR. You will need the Crossbars #TH711420,…

The Transcom #TCM 21344 TB cross references to the 10-10 seal we offer, part #RG06-090. The seal has a 2.125 inch ID and a 3.376 OD. It's compatible with a 25580 inner bearing.

To be completely honest the sway control feature of the B and W Continuum part #BW78FR isn't nearly as advanced as the rest of the system. The advertised sway control of this system is in the head of the system between where…

Trailer or automotive wheels can have a positive or negative offset. The offset refers to the distance between the mounting surface of the wheel that touches the hub and the center line of the wheel, as shown in the diagram I have edited for you. A…

Hey Antoine, so the two kits you mentioned are actually really similar and honestly I would go with the part #ETBC7 if I were you. The #ETBC7L is basically the same thing minus a couple wires and breakers so you may as well get the kit that has…

Hey James, so the thickness of the Small Coin Vinyl flooring #TS97FR that you referenced is 90 mil thickness.

The measurement you're referring to for the Erickson Removable Motorcycle Wheel Chock #EM07506 is 8". This wheel chock has overall measurements of 11-3/4" long x…

Hey Tarek, for your 2023 Ford Raptor I recommend checking out the Timbren Suspension Enhancement System #T75MR. This suspension enhancement system has a load leveling capacity of 3,000 lbs, will increase stability while reducing sag, and will…

Based on the information I could find for the DICO 45264 is was popular on ShoreLand'r trailers. This would require the Idler Hub #AKIHUB-545-35-G-EZ-K with the Grease Seal #168255TB used instead of the seal included with…