Videos
for Truck Bed Lights
Help Articles
for Truck Bed Lights
Expert Answers
for Truck Bed Lights
Thank you for providing the pictures. This helps me to confirm you will need the Replacement Tarp #EX92915-20 for the Extang Trifecta 2.0 Soft Tonneau Cover #EX92915 on your 2009 Toyota Tacoma.
view full answer...On your trailer you originally had what is called a wishbone harness. This type of harness has the running light circuit split at the connector so one wire will run to the left side, the other to the right side. This is so you do not have to have a…
view full answer...Your Freelfree Overdrive Lure II Tandem kayak will indeed fit on your existing roof rack. According to what I've managed to look up, the kayak weighs up to 115 lbs, which is well within the capabilities of the Yakima Jetstream…
view full answer...For your 2017 Chevy Silverado 3500 the 5th Wheel/Gooseneck Hitch Wiring harness part #C56070 would be the correct fit as your truck uses the standard 7-way round connector that this uses/needs. It is possible the wire colors you are working with…
view full answer...Pace Edwards recommends using a 303 Protectant spray on the rails of the Pace Edwards Switchblade Retractable Hard Tonneau Cover #311-SWF7084. They recommend periodically applying a generous amount of the 303 Protectant to a rag and wiping out the…
view full answer...We have just what you need! The Thule TracRac CapRac part #TH29200XT is confirmed as a fit for a camper shell on a 2018 Ford F-150 and would work great. It also fits all bed lengths too based on how it installs. This rack has heavy-duty aero shaped…
view full answer...The #UF48-979002 feature oversized footplates that are 4-1/2" wide by 9" long, so you could use them without leveling blocks. However, it's not uncommon for people to use leveling blocks…
view full answer...We have just what you're looking for with the Gen-Y Anti-Rattle Clamp for 2" Hitch Receivers #GY88XR. The sleeve acts as a wedge to take out play between your hitch receiver and extender. Although it does not…
view full answer...To ensure that your spindle is not sticking out of your hub farther than it should, I would recommend verifying that all of your bearings and seals are seated correctly and the hub is tightened down correctly. When tightening the hub to the…
view full answer...I do have a solution for you, however the Draw-Tite QSP Trailer Hitch Silencer and Cover for 2" Hitch Receivers #63080 is specifically designed to work with Draw-Tite 2" x 2" trailer…
view full answer...It looks like your dust cap shifted out of place somehow. There is nothing designed to indicate a need for replacement, but that is not the way it should look. I would pull it off all the way and inspect it. If it looks fine drive it back in and…
view full answer...It appears that your u-bolt plate on your 2021 Grand Design Reflection 31MB, will work with the SumoSprings Trailer Helper Springs #SS26MV. The plate itself including the bends does not appear to be larger than 3/4" nor does…
view full answer...