Videos
for Throw Blankets
Help Articles
for Throw Blankets
Expert Answers
for Throw Blankets
The #LC279688 is the direct replacement for your 145545 Equa-Flex. You do not want to use the Road Armor #LC696740 as a replacement. The Road Armor dimensions are quite different and will likely throw off other suspensions components. You also…
view full answer...Yes. The only difference between the Trailer Valet XL Trailer Dolly with Chain Drive - 2-5/16" Hitch Ball - 1,000 lbs TW #TVXL25 and the Trailer Valet XL Trailer Dolly with Chain Drive - 2" Hitch Ball - 1,000 lbs TW #TVXL2 is the…
view full answer...Yes. They are the same part with different base and hitch balls being the only difference. You can swap the hitch ball on the Trailer Valet XL #TVXL25 using the #TVBB2, which would be ideal for switching hitch ball sizes more frequently since it…
view full answer...If your Valley 22K 5th Wheel Hitch (Model 7052) uses industry standard base rails (ISR) which I believe it does then you can use the Reese Quick-Install Custom Installation Kit part #RP50026-58 if you don't have the factory 5th wheel prep…
view full answer...The best replacement we have for the Sylvania Microwave SR-11092B is going to be the Greystone Microwave part #324-000105. This microwave comes with its own frame that will need to be used but it should cover your cut out so you will never be able to…
view full answer...The answer to your question will depend on whether your wheels are hub centric or lug centric. Hub centric wheels center on the hub using the hub bore and lug centric wheels center on the hub using lug nuts. Hub-centric wheels typically use wheel…
view full answer...I recommend getting the correct parts for the axle that you have and not trying to use the parts in the Over-Under Conversion Kit #K71-384-00. The correct Spring Seat #TRSS175 will need to be welded onto your new axle. This will allow you to mount…
view full answer...The correct 54" Yakima Tracks for a Camper Shell is part #Y26RR which will allow you to use any standard track mounted roof rack. The other options you listed, part #Y01127 and part #Y64MR are for metal roofs and ladder racks respectively. Since…
view full answer...As far as great heavy-duty mats that will fit with your clutch pedal on your 2019 Nissan Frontier king cab, I recommend the following mats: - WeatherTech Front Auto Floor Mats - Black #WT441761 - WeatherTech Front Auto Floor Mats - Gray #WT461761 -…
view full answer...The Tekonsha P3 controller has a 180 degree vertical plane operating range. It can be mounted between -90 degrees ,straight down, and 90 degrees, straight up. I have included a link to the instructions for the P3.
view full answer...I reached out to my contact at Lippert and she mentioned there would be no issues using the Road Armor Shock Absorbing Equalizers #LC696740 on a trailer used as much as yours, and that since adding them would relieve stress on your axles and other…
view full answer...Yes the Road Armor Shock Absorbing Equalizer Kit part #LC696740 is a fit for your Keystone camper and will give you some additional clearance between the wheels. There will be little to zero ride height or camber change and zero toe angle change.
view full answer...