Filter Results
$27.06 - $174.48
$66.03 - $66.03
Videos
for RV Plug Adapters
Help Articles
for RV Plug Adapters
Expert Answers
for RV Plug Adapters
Thanks for providing that information it really makes this simple. To find the right Gen-Y we need to calculate your tongue weight using the formula GVWR x 0.22 = TW. The Z2900 has a GVWR of 14,495 lbs so the TW is 3,189 lbs. Based on this…
view full answer...I recommend using a Lube Plate #16721 over covering the Demco Recon 5th Wheel Trailer Hitch #DM8550043 in Grease #L74FR. The lube plate is much cleaner and you will not have to constantly clean off the dirt and apply new grease over time.
view full answer...Kenny, those bolts for the B&W Companion 5th Wheel Trailer Hitch #BWRVK3500-5W should be torqued to 40 ft. lbs. Also, the pivot arms would need to be torqued to 80 ft. lbs, the draw down bolt should be tighten to 60 ft.lbs and the arms…
view full answer...Hi David; nope, the leaf springs don't need to be changed if going to the AllTrek 4000 equalizers. You just need to choose the right one based on your wheelbase (measured center-to-center of your wheels): - 33" Wheelbase:…
view full answer...According to MORryde the AllTrek 4000 #MR29DR does not have a minimum weight requirement. However, smaller axles typically aren't compatible since there are other requirements like wheel size. The equalizers require a minimum rim size of…
view full answer...To add a 5th wheel hitch to your long bed 2024 GMC Sierra 2500, I recommend the B&W Companion OEM 5th Wheel Hitch item #BWRVK3710 for a 20,000 lbs capacity or item #BWRVK3715 for a 25,000 lbs capacity. These 5th wheel hitches will mount…
view full answer...So Carl, I checked and your 2024 Brinkley Z-3100 has a Rhino box style pin box so the correct Gen-Y gooseneck Executive is the part #GY98GR. Since your 2024 Ford F-350 has a short bed and the nose of the trailer is a bit wider I would recommend…
view full answer...You can replace the Lippert Rhino pin box on your Brinkley 5th wheel. The right one though is going to depend on the pin weight of your trailer. Here are the options that will work to replace the Lippert Rhino: - Pin Weight of 1,500 lbs - 3,500…
view full answer...Hey Mark, since we know your Brinkley Z3100 has the Rhino style pin box, the correct Gen-Y fifth wheel to gooseneck adapter is the part #GY98GR which comes with the auto latch you mentioned wanting as well!
view full answer...I checked the install manual for the MORryde Wall RV TV Mount part #MR82ZR and there were no stipulations for mounting orientation but the location of the handle will change if you choose to mount it so it slides out to the left. That said, you…
view full answer...Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors…
view full answer...For your 2003 Nissan Xterra and Forest River Tent Trailer, I recommend the Equal-i-zer Weight Distribution System part #EQ37060ET which is rated for up to 600 lbs. The 400 lb system part #EQ37040ET would not be a good choice as this will be at the…
view full answer...