Videos
for Power Steering Coolers
Help Articles
for Power Steering Coolers
Expert Answers
for Power Steering Coolers
I took a look at the online owner's manual for your 2005 Honda Pilot. It states that this vehicle, if equipped with a transmission cooler and power steering fluid cooler, has a maximum towing capacity of 3,500 pounds for a standard trailer.…
view full answer...The transmission return line on your 2005 Honda Pilot can be located between the frame crosstube and the drivers side support bracket (see photo). The return line will be the line closest to the front of the vehicle. We installed Derale Series 8000…
view full answer...The main differences between the available transmission coolers is the style of the coolers and the size. There are style that are more efficient that others, and obviously the bigger the cooler the more efficient it is as well. The tube-and-fin…
view full answer...I have exactly what you need to add a 7-way trailer connector to a 2016 Honda Odyssey. For this, you'll need to start with a 4-way trailer connector and I recommend the T-One Vehicle Wiring Harness part #118521 which is plug-n-play. Then you can…
view full answer...The best way to pick out a transmission cooler for a vehicle like your 2005 Honda Pilot would be to go with the biggest one that will fit the available space the vehicle has in front of the radiator/AC condenser. I would go with the #D13503 over the…
view full answer...The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
view full answer...The Class of transmission cooler you use will depend more on where you can mount it. The most efficient place is in front of the AC condenser. You could then use a Class I cooler, like #D12901. If mounted behind the condenser, I would go with a Class…
view full answer...The Dexter Nev-R-Lube 6k hubs use 42 mm bearings so the correct replacement is the part #31-73-3.
view full answer...Without knowing which cameras you have installed on your 2016 Jayco Precept, I can not say for sure if they will be compatible with the Rear View Safety Color Monitor #RVS-6139Q. However, if your cameras are not compatible, you can use the Rear View…
view full answer...I went ahead and contacted Voyager about this, and they told me that the Voyager RV Side Camera is only designed to work with Voyager monitors like the Replacement Voyager WiSight 2.0 Wireless RV Backup Camera Monitor #ASA27FR. This is because these…
view full answer...I have a solution for you, but you're not going to be able to use the #RVS-OA04 in order to connect to a camera with a 4 pin female connection. We also do not have a 4 pin male to 5 pin male adapter available that would allow you to bridge the…
view full answer...There are a few differences between the Universal Installation Kit part #ETBC7 and the 7-Way RV Upgrade Kit part #ETBC7L. The biggest one is that part #ETBC7 comes with both the power and brake output wire you will need to run to the cab/battery…
view full answer...