Videos
for LED Strip Lights
Help Articles
for LED Strip Lights
Expert Answers
for LED Strip Lights
The 12v accessory pin from the 7-way would need to be connected to the battery in order to charge it so you'd first need to make sure it was actually wired that way since not every manufacturer does.…
view full answer...Hey Philip so while we don't carry the exact spring you are looking for it does match the specs of the #e59SR so this would be a great solution. It's…
view full answer...Yes, 14 gauge wire seems too small. I would go with 10 or 12 gauge. For 10 gauge you can use #10-1-1 and for 12 gauge use #12-1-1. These wires are sold in increments of 1 foot. So if you needed 20 feet of wire you would enter 20 in the quantity…
view full answer...I checked with Dexter and they indicate that for hub 008-386-80: "Available for service parts only." Meaning the actual hub assembly is not available…
view full answer...Hey Gary, so the Yakima 54" Tracks for Roof Racks #Y26RR that you referenced are compatible with your setup as they provide the standard dimension roof tracks that your Sherpa Crows Nest was designed…
view full answer...The attachment bolts for a 5-bolt brake assembly like the part #AKEBRK-6R should be torqued to 30-50 foot/lbs. If you don't have a torque wrench handy, if you tighten the bolts until the lock washers…
view full answer...The torque spec for the bolt part #7-103 is 106 ft lbs.
view full answer...I have a solution for you, but the main issue with puck style lights that mount to the surface of your RV ceiling or under cabinets, is that there aren't replacement bulbs available and they…
view full answer...Yes, the Curt hitch part #C77ZV is a fit for the 2023 Toyota Crown Hybrid. I attached a link to the install instructions as well as a link to an installer finder in case you wanted to find someone near you to install the hitch.
view full answer...For a 10 lb gas strut we only have the Taylor Made Marine Gas Strut for Boat Hatches #3691835-10 which is only 20" long. Seeing as though you'd prefer a…
view full answer...Did you pull any fuses or disconnect the battery before installing the Replacement Hydraulic Pump for Lippert Level Up Leveling Systems #LC58TF Vic? Have you tried unplugging and replugging the connector back in to see if a pin needed to be…
view full answer...My online research did not turn up any direct replacement parts for the HB732 hub you referenced. However, we can help you select new replacement hubs. The things you need to know in order to select replacement hubs are: the bolt pattern on your…
view full answer...Videos
for LED Strip Lights
Help Articles
for LED Strip Lights
Expert Answers
for LED Strip Lights
The 12v accessory pin from the 7-way would need to be connected to the battery in order to charge it so you'd first need to make sure it was actually wired that way since not every manufacturer…
view full answer...Hey Philip so while we don't carry the exact spring you are looking for it does match the specs of the #e59SR so this would be a great solution.…
view full answer...Yes, 14 gauge wire seems too small. I would go with 10 or 12 gauge. For 10 gauge you can use #10-1-1 and for 12 gauge use #12-1-1. These wires are sold in increments of 1 foot. So if you needed 20 feet of wire you would enter 20 in the quantity…
view full answer...I checked with Dexter and they indicate that for hub 008-386-80: "Available for service parts only." Meaning the actual hub assembly is not…
view full answer...Hey Gary, so the Yakima 54" Tracks for Roof Racks #Y26RR that you referenced are compatible with your setup as they provide the standard dimension roof tracks that your Sherpa Crows Nest was…
view full answer...The attachment bolts for a 5-bolt brake assembly like the part #AKEBRK-6R should be torqued to 30-50 foot/lbs. If you don't have a torque wrench handy, if you tighten the bolts until the lock…
view full answer...The torque spec for the bolt part #7-103 is 106 ft lbs.
view full answer...I have a solution for you, but the main issue with puck style lights that mount to the surface of your RV ceiling or under cabinets, is that there aren't replacement bulbs available and they…
view full answer...Yes, the Curt hitch part #C77ZV is a fit for the 2023 Toyota Crown Hybrid. I attached a link to the install instructions as well as a link to an installer finder in case you wanted to find someone near you to install the hitch.
view full answer...For a 10 lb gas strut we only have the Taylor Made Marine Gas Strut for Boat Hatches #3691835-10 which is only 20" long. Seeing as though you'd prefer…
view full answer...Did you pull any fuses or disconnect the battery before installing the Replacement Hydraulic Pump for Lippert Level Up Leveling Systems #LC58TF Vic? Have you tried unplugging and replugging the connector back in to see if a pin needed to be…
view full answer...My online research did not turn up any direct replacement parts for the HB732 hub you referenced. However, we can help you select new replacement hubs. The things you need to know in order to select replacement hubs are: the bolt pattern on your…
view full answer...