Filter Products
Filter by Extension Cord Type
$80.36 - $80.36
Videos
for Extension Cords
Help Articles
for Extension Cords
Expert Answers
for Extension Cords
No, there are no custom fit base plates for a truck that old. The only thing I can offer you is the Blue Ox Heavy-Duty Universal Bolt-On Adapter Tabs item #BX88266. These are compatible with Blue Ox tow bars and are a universal part. They bolt…
view full answer...Both adapters will fit the puck system in your 2023 Ram 2500. The #C16022 is designed to work only with Curt brand sliding fifth wheel hitches like the #C16541. The #C29BR is more of a universal adapter and can be used with both sliding and fixed…
view full answer...The Tonneau Cover Adapter Kit #Y01155 is only a fit for the integrated tracks on Retrax XR Series, Embark LS and Pace-Edwards UltraGroove (except for 2004+ F-150) tonneau covers. While your Roll n Lock tonneau cover does have t-slots for some…
view full answer...In order to add a brake controller to a 2021 Subaru Outback you'll first need to start with a 4-way trailer connector, the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part #118467 is what I recommend. It's plug and play.…
view full answer...Since your 2021 Subaru Outback Wagon does not have factory trailer wiring you'd need to first install a 4-way with part #118467 and then convert it to a 7-way with a 7-way adapter like the part #37185 to give you the 7-way. But since you are…
view full answer...Spring bars are designed to bend, but if you are putting a significant bend into your spring bars and you think that even more spring tension would help you tow better, but you don't have any adjustment left then it sounds like you have spring…
view full answer...Thanks for reaching back out! It looks like the Replacement Fan Motor Assembly Kit for Dometic FanTastic Roof Vent Fans #FVK8017-00 will actually work with the FV7300 model as well so it's exactly what you're needing! We've confirmed this…
view full answer...The Mighty Cord RV Extension Cord w/ Pull Handle #A10-5015EH uses 8 gauge wire for the ground and 6 gauge wire for the positive and neutral lines.
view full answer...The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
view full answer...I will be happy to help you find the right LED replacement lights for your horse trailer. Based on the information you have provided the amber LED replacement is #MCL76AB. The red version is #MCL76RB. Another option is to use Peterson lights #M353A…
view full answer...We offer a very similar LED clearance/marker lamp that has the same 4-13/16 inch bolt hole spread as the Peterson PM130 lamps you have. For the Red lens, use #MCL76RB or for an amber lens, use #MCL76AB. Both lamps will use the existing mounting…
view full answer...What you have there is an obsolete Bargman 35 amp power inlet. There ARE adapters out there, but they are VERY rare and therefore expensive. I'd recommend removing it and installing a modern 30 amp inlet like part #A10-30INVP along with a 30 amp…
view full answer...