The CIPA Retractable Dock Cleat part #CM02100 doesn't come with hardware nor can we really advise on what you need exactly as it comes down to the specific application you'll be installing it on which will not be the same for every…

Yes, the Jif Marine Dock Corner Bumper item #JIF87VR is compatible with the Jif Marine Dock Edging - P-Shape item #JIF56VR. They are both made of marine-grade flexible poly vinyl. I recommend securing the edging every 12" both on the top…

You can find the cover for the Fulton F2 jack gearbox here: Replacement Gearbox Cover #F500135. But if you are referring to the gearbox itself then that is unfortunately not available. I recommend looking into a new jack such as Fulton Bolt-Thru…

For your Fulton F2 Swing-Up Trailer Jack, Dual 7" Wheels, Sidewind, Bolt-On - 1,600 lbs #F1413020134 part number 9 you referenced is not a replacement option. The outer tube components are not replaceable according to my contact at Fulton. That…

Fifth wheel hitches can be pretty tall. Especially if you use a rail kit adapter like the #RP30156 which will add 2-3/4 inches from the floor of the truck bed to the top of the rail kit adapter. Most likely your Pullrite is going to sit too tall to…

If your SuperGlide will work with industry standard fifth wheel rails that are 22 inches apart then the #RP30156 adapter will work for you. Some of the Pullrite hitches only fit their rails and adapters so if that is the hitch style you have then…

The Valley 7054 hitch is pretty old so info on it is harder to come by, but we do know that it is a slider hitch and that it fits the rails that the Reese adapter part #RP30156 provides. So if you have a 7054 hitch and a Ford truck with the factory…

The 2.441" Bearing Buddy Bearing Protectors #BB2441SS is the next size up from the 2.328" #BB2328SS.

You are correct that the zerk fitting on your spindle will need to be removed for you to use the bearing buddy, but the great part is the bearing buddy will be able to push grease through the spindle providing grease through the spindle to the inner…

The Bearing Buddy Bearing Protectors #BB2441SS are not threaded. These are simply pushed into place. If you need this same size but that are threaded then the part number you're looking for is #BB2441T-SS instead. Same specs and still stainless…

The correct Bearing Buddy size needed for the Dexter Trailer Idler Hub Assembly for 6,000-lb E-Z Lube Axles #8-213-51UC1-EZ is 2.44". That being said, you can use the: -Bearing Buddy Bearing Protectors #BB2441SS for stainless steel. Or -Bearing…

Often an axle's weight rating will appear on a sticker or plate on the axle beam itself, or sometimes the trailer's main identification sticker will include axle ratings. This is helpful unless of course the axles have been replaced during…