Videos
for Camping Lights
Help Articles
for Camping Lights
Expert Answers
for Camping Lights
So I have your hub narrowed down to a few different possibilities but we need to know what your bolt pattern is to know for sure. We have the part #84556UC3 for if your bolt pattern is 5 on 5 inch. We have the part #845476UC3 for if your bolt…
view full answer...Are you sure that's the number you found? I can't find any references to it anywhere.
view full answer...I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and…
view full answer...Aluminum A-Frame Trailer Tongue Toolbox Item #350970 is weather resistant but not waterproof. For something to be considered waterproof it has to be able to be submerged under water for a certain period of time and not let water in. None of the…
view full answer...Thanks for reaching out, Michael! The Dexter Electric Trailer Brakes #K23-086-087-00 are compatible with 3,500 lb axles and have the standard 4-bolt pattern so if that matches the specs of your axle then this will definitely work for your…
view full answer...Lippert does have a remote that allows control of the slide outs as part #LC292614 but the part #LC358601 is for a system that does not control slide outs.
view full answer...I looked up the dimensions of your Liteco 179 interior light and the closest thing we have to it would be the part #ILL06COB which will be 11 inches by 4 inches. Your current light is 19-1/2 inches by 6-1/2 inches so this would be a bit smaller but…
view full answer...You can use the RV Propane Gas Detector #RS64FR to replace your current Atwood 31013 propane gas detector. This will also use a 12v, 2-wire installation like your current detector.
view full answer...Hi Shelly, thanks for the question and it's possible we have something depending on the dimensions of your skylight/sunroof. What most people use for this is the Camco Lights Out Retractable Shade for RV Roof Vents #CAM42913.…
view full answer...The EB01-140 and EB01-145 are Redneck Trailer Supply part numbers for a Dexter 12-1/4 x 3-3/8 7-bolt brake assemblies for a 9-10K axle. The proper replacements are available as part #23-450-451, which includes the left and right self adjusting…
view full answer...Thank you for all of the info you gave. Based on that you'd want the trailer hub and drum part #AKHD-545-35-K that you referenced and then for brake assemblies to match you'd want the #AKEBRK-35-SA which is a…
view full answer...From what I could find, the #171255UC grease seal has an inner diameter of 1.719 inches and an outer diameter of 2.565 inches. These dimensions match our TruRyde Double Lip Grease Seals, #RG06-050. If possible, I recommend verifying the inner…
view full answer...