Filter Results
$31.09 - $31.09
$29.96 - $39.95
Videos
for Camping Lights
Help Articles
for Camping Lights
Expert Answers
for Camping Lights
Are you sure that's the number you found? I can't find any references to it anywhere.
view full answer...Thanks for reaching out, Michael! The Dexter Electric Trailer Brakes #K23-086-087-00 are compatible with 3,500 lb axles and have the standard 4-bolt pattern so if that matches the specs of your axle then this will definitely work for your…
view full answer...Lippert does have a remote that allows control of the slide outs as part #LC292614 but the part #LC358601 is for a system that does not control slide outs.
view full answer...I looked up the dimensions of your Liteco 179 interior light and the closest thing we have to it would be the part #ILL06COB which will be 11 inches by 4 inches. Your current light is 19-1/2 inches by 6-1/2 inches so this would be a bit smaller but…
view full answer...You can use the RV Propane Gas Detector #RS64FR to replace your current Atwood 31013 propane gas detector. This will also use a 12v, 2-wire installation like your current detector.
view full answer...Hi Shelly, thanks for the question and it's possible we have something depending on the dimensions of your skylight/sunroof. What most people use for this is the Camco Lights Out Retractable Shade for RV Roof Vents #CAM42913. Technically…
view full answer...The EB01-140 and EB01-145 are Redneck Trailer Supply part numbers for a Dexter 12-1/4 x 3-3/8 7-bolt brake assemblies for a 9-10K axle. The proper replacements are available as part #23-450-451, which includes the left and right self adjusting…
view full answer...Thank you for all of the info you gave. Based on that you'd want the trailer hub and drum part #AKHD-545-35-K that you referenced and then for brake assemblies to match you'd want the #AKEBRK-35-SA which is a self adjusting set for both sides…
view full answer...We currently have not had a Ford F-150 with the power outlet in the bed to test fit a bed mounted 7-Way #C57008. I see no reason you will not be able to still install the 7-way as there is a large gap which can be seen in the installation video which…
view full answer...The Go Power #34282184 380 watt Solar Elite Charging System does indeed include the battery temperature sensor, as shown in the provided photo. If you click the provided link, you can see a typical installation.
view full answer...Both the Recessed #e69RR and Surface Mount #e79RR table leg kits are going to use the same 27" long table leg. The 26-1/2" and 28-1/2" measurements you see on our site are the heights from floor to base of table. So with a 1"…
view full answer...The rubber pads for the Rhino-Rack XTray Clamp Set unfortunately are not sold separately so you would either need to reach out to Rhino-Rack to see if they could ship you them or purchase a replacement clamp set #RRSP112.
view full answer...