Filter by Category
$35.95 - $35.95
Videos
for Camping Games
Help Articles
for Camping Games
Expert Answers
for Camping Games
Hey William, the E6 error on a Furrion wall thermostat indicates an Open circuit Humidity Sensor issue. Most likely the sensor is bad and needs to be replaced as this is a pretty rare error code.
view full answer...The Replacement Clamp #RRSP112 is a single clamp for the Rhino-Rack Roof Mounted Steel Cargo Basket #RMCB. Included is the clamp, screws, and all parts to secure the basket at one point to your crossbar.
view full answer...The Front Runner Slimline II Platform Rack #FR89MJ is the best way to carry a Tent #FR26RV on your 2024 Kia Sportage. The platform will attach to your raised roof rails and will allow you to attach the tent using their Kit #FR99RV.
view full answer...It sounds like you are definitely on the right track here. The #MR79ZR is indeed the correct suspension upgrade kit for your 2007 Colorado 5th wheel with LRE suspension. Moryde makes a fantastic suspension upgrade kit. The heavy duty shackles and wet…
view full answer...I reviewed all of our trailer wheel bolt inventory and did not have a match for your request. I also contacted our suppliers and was not able to make a match there. The bolts I found were not 13 threads per inch coarse, nor left-handed. I suspect you…
view full answer...We currently have not had a Ford F-150 with the power outlet in the bed to test fit a bed mounted 7-Way #C57008. I see no reason you will not be able to still install the 7-way as there is a large gap which can be seen in the installation video which…
view full answer...If the front part of your square-bodied coupler is approximately 3 inches tall, based on the inner dimensions of the lock the Blaylock EZ Lock Trailer Coupler Lock #BLTL-33 will work well for you. The #BLTL-33 has inner dimensions of 3-1/8 inches x…
view full answer...The rubber pads for the Rhino-Rack XTray Clamp Set unfortunately are not sold separately so you would either need to reach out to Rhino-Rack to see if they could ship you them or purchase a replacement clamp set #RRSP112.
view full answer...The Replacement Gear Motor with Pinion Gear #BVB0601-00 is the correct replacement for the Ventline Ventadome roof vent model V2119. It sounds like you also need the Replacement Operator, Knob and Screw for Ventline Ventadome Trailer Roof Vents…
view full answer...The Progressive Dynamics RV Power Control Center #PD4135K is going to be the closest in dimensions to replacing the Magnetek model 80 power center you have. This control center fits inside a 10-1/4" long x 7" tall cutout and is 11-1/4"…
view full answer...The Fastway Universal Trailer Coupler Lock for 1-7/8", 2" and 2-5/16" #FA86-0015-316 will work with a coupler that is 4-1/2 inches wide and are a great (not to mention popular) style of lock. This lock is sold under multiple part…
view full answer...I took a look online, the Curt Trailer Hitch item #C13105 you have on your Sienna is rated to be used with a weight distribution system. The best one for your 2,100 lbs pop up camper is going to be the Equal-i-zer Weight Distribution System item…
view full answer...