Videos
for Buoys
Help Articles
for Buoys
Expert Answers
for Buoys
For an RV with a currently installed Dometic Duo-Therm 59516.531 AC unit, I recommend the Advent Air for Dometic Setups, #ACDOM150. This is a 15,000 Btu replacement option that plugs directly into your current Dometic setup and works seamlessly…
view full answer...If the trailer is supposed to have 185/80-13 tires on it, then you should stick with that tire size and use #AM3S334. This is the correct size tire with a galvanized wheel. The only difference is this is a bias tire and not a radial. A bias tire…
view full answer...Yes, you can replace the 3" and 1-1/2" valves on your Bristol Double RV Waste Valves - Elbow - Rotating - 3" and 1.5" Hubs to…
view full answer...Yes, the LaSalle Bristol Cable-Actuated RV Waste Valve for Black Water Tank #34466N4AB96GMA will work with your 24 CSA Z240.3.2 setup as this waste valve is compatible with 3" diameter black-water sewer pipe. If…
view full answer...To install a brake controller in your 1998 GMC C/K series 1500, there are a couple of items you will need in addition to the brake controller. If the truck does not have a 4-Way trailer connector, you will need to add one like part #118315. The…
view full answer...The best recommendation I can give you since we don't carry the Gabriel actuators would be to check out the link I attached that will take you to a page that has all of the actuator shocks we carry. On the product pages for…
view full answer...The gearbox #RVLG-RDBOX for the Landing Gear Set w/ Handle #RVLG-8HDL can be mounted in the horizontal or vertical position. I went out to the warehouse and tested both the gearbox and lead leg together and the pins that hold the gearbox in place…
view full answer...The difference is that the #RVLG-8000 does not come with a handle and the #RVLG-8HDL does come with one. Aside from that it's the exact same jacks. We don't offer replacement legs for them so if you…
view full answer...The Landing Gear Set w/ Handle - 36-1/2" Lift - 8,000 lbs #RVLG-8HDL will simply mount to the weld-on brackets by being bolted on. While an online copy of the manual is not available for this specific landing gear, I did cut…
view full answer...There are a couple of things that can lead to the tires wearing on the inside only. Basically what is happening is the top of the tire is leaning in towards the trailer causing most of the weight to ride on the inside. This pretty much means the…
view full answer...The combination trailer tires/wheels that we offer, including the Kenda Loadstar Trailer Wheel/Tire #AM3S334 that you referenced, are not shipped in a fully dynamically-balanced state. They are, however, mounted with the…
view full answer...For a higher speed rated trailer tire in the size you need of ST175/80R13 the best option is the Kenda tire part #AM10208 as this tire is rated for up to 81 mph. The weight capacity of the tire is 1,710 lbs at 65 psi. I attached a review video for…
view full answer...