UWS Wedge Toolbox Review - 2003 Dodge Ram Video

You do not have to use a sliding 5th wheel hitch in a short bed truck. In many cases, truck beds shorter than 8 ft do not have enough clearance between the trailer and truck to execute sharp turns. This is why sliding hitches were invented. Due to…

The canister on the #PE66QJ measures 9-3/4" front to back. The overall dimensions are 9-1/4" tall x 9-3/4" deep.

The Pace Edwards Switchblade #PE66QJ weighs a total of 82 lb.

We have a similar Pace Edwards retractable tonneau cover that can retract at 12 inch increments but the Switchblade part #PE66QJ can only be either all the way open or all the way closed. Instead you'd want the Full Metal Jacket part…

I have a great tool box option for your 2022 Ford F-250 that sits below the rails of your truck bed. The UWS Truck Bed Chest #UWS01048 is going to do a great job of wisely using the space in your truck bed while staying below the bed rails. It is…

Pace Edwards only has their fitments listed up to 2022 so I recommend reaching out to your local Ford dealership to determine if there were any changes to beds between 2022 and 2023. If not, then the Pace Edwards Switchblade Retractable Hard…

Yes! For mounting the Malone TradeSport Ladder Rack #MAL55VR to your Toyota Tacoma, you need to use the included Toyota Tacoma fit kit hardware. This kit is designed specifically for your truck. I went ahead and attached a screenshot of this fit…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

The Extang Solid Fold 2.0 Hard Tonneau Cover - Toolbox Edition #EX84488 sits on top of the bed rails of your 2022 Ford F-350 Super Duty 8' bed so if your 5th wheel hitch sits below the top of your bed rails this will physically fit in that…

For your 2018 Ford F-350 with the factory fifth wheel rail kit towing a 24,000 lb trailer the B&W Companion OEM 5th Wheel Hitch #BWRVK3305 that you referenced is definitely your best option. It has a 25k capacity so it will easily handle…

Yes, it is possible to change out the B&W Companion OEM 5th Wheel Hitch part #BWRVK3305 for the Curt A20 5th Wheel Trailer Hitch part #C16034 as this would then lower the hitch head height up to 3-3/4". However, you will still need…

The weight of the Pace Edwards Switchblade #PE66QJ is 68 pounds. As far as as your question about the height of the cover installed on the side rails, it sits just shy of 1/8 of an inch. With this measurement, it truly depends on the height of your…