Filter Results
$330.53 - $330.53
$287.20 - $287.20
Videos
for Boat Covers
Help Articles
for Boat Covers
Expert Answers
for Boat Covers
Hi Sean, We do offer the Ground Control 3.0 for prepped trailers part number 2021106810 as part #LC52ED. This is going to include the rest of the components needed to complete the system. Since we don't have a video of this kit yet…
view full answer...The TruXedo Boat Windshield Cover #TX38FR places the polypropylene against the windshield to protect it from scratches. If you were to put the fabric side against the windshield it could hold particles of dirt and debris. While in tow the cover…
view full answer...I have attached a chart you can check out that describes the torque needed per wheel size, wheel stud size and material. For an 8-inch wheel with a 1/2-inch wheel stud the torque is 75 to 86 ft-lbs. For a 15 inch steel wheel with 1/2 inch wheel…
view full answer...The DeeMaxx Disc Brake Kit #DE82FR comes with 2 Slip-on rotors, calipers and brackets for one axle. The slip on rotors are for a 6 on 5-1/2" idler hubs and the mounting brackets fit on a 5 bolt brake flange.
view full answer...The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13…
view full answer...The diameter of the top plate on the #JSC-30 is 9 inches. This top plate is also the mounting plate as the bottom is what touches the ground. The holes on this plate are 7-7/8 inches apart measured across.
view full answer...The main difference between the two covers that you mentioned is the application for the two. The Classic Accessories DryGuard Waterproof Boat Cover #CA20085 is designed for bass and fishing boats whereas the Classic Accessories Boat Cover…
view full answer...The Saris Swing Away Hitch Extender for Bike Racks #SAR36VR has an overall capacity of 250lbs (rack and bikes) so it could technically accommodate two 85lb e-bikes as well as a rack, but the bike racks confirmed to be compatible with this extender…
view full answer...It looks like you have the BAKFlip MX4 for the 2013 Ford F-350 short bed, part #BAK48310. This tonneau cover does install inside the bed rails, so using the Thule TracRac SR Sliding Truck Bed Ladder Rack that is compatible with your truck, part…
view full answer...For your 2015 Ford F-250, the BAKFlip folding hard tonneau covers will work well and there are 4 options to choose from. There is the BAKFlip G2 Hard Tonneau Cover #BAK26310, FiberMax #BAK126310, F1 #BAK72310, or MX4 #BAK48310. Each of these…
view full answer...I attached a picture that shows the Torklift Camper Tie Down #TLF2021 installed on a truck with a set of running boards. If the running boards are cab length they'd be fine, but if they go from the wheel well to wheel well they would…
view full answer...For a 3x4 inch frame the best hinge kit would be the part #FHDPB350101. This is for a 3 x 5 inch frame but you could have 1/2 inch spacers welded to either side of the channel and it would and work just fine.
view full answer...