Filter by Brand
$5.64 - $18.01
Videos
for Automotive Tools
Help Articles
for Automotive Tools
Expert Answers
for Automotive Tools
Trailer stabilizer jacks like #TJSCHD-24 are not designed to be used to lift a trailer and hold it up for maintenance. Their purpose is to stabilize the trailer while it's…
view full answer...Hey Richard, thanks for reaching out! The Dexter DX7.5 Drop-N-Go Brake Actuator #099-175-00 is a great option for a replacement actuator because it's a direct replacement…
view full answer...The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
view full answer...The safety chain hangers are mounted in different locations is the only difference between the Hidden Hitch item #DT98GR and item #DT97YR. Both hitches are confirmed to fit a 2023 Toyota RAV4 hybrid. They have a removable…
view full answer...To remove the 3" cap on your Valterra Sewer Drain like #T30A I recommend using the FloTool GRIPTECH 3-Position Adjustable Pliers #FT10627GT which can be adjusted between…
view full answer...Hey mark I can definitely try to point you in the direction of the correct hubs and brakes for your trailer. I was not able to find any useful references for the numbers you provided, but there are other ways to determine the correct hub. Do you…
view full answer...In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.
view full answer...I confirmed with EcoHitch and their Trailer Hitch Receiver #EH39FR was just confirmed to fit your 2024 Tesla Model Y this week. This is great since the receiver opening is accessible through the rear cover plate just like a factory option.
view full answer...The only real difference between the Alpha Systems #AL74UV and the LaSalle Bristol #3441700534142711440 is that the Alpha Systems is made of TPO which is a bit less flexible than Elvaloy-based PVC that #3441700534142711440 uses; PVC is going to be…
view full answer...It is not recommend to jack up a trailer by the axle. This may cause damage to the axle itself. It also puts too much stress on the leaf springs. Instead, you will want to place the jack under part of the trailer frame preferably next to the leaf…
view full answer...The hardware with our etrailer Receiver #e85AR for your 2009 Jeep Liberty is M12-1.75 thread. We do include this size in our Metric Tap Kit #PT22FR if you do not already have it. A Brush #814092 will also help you clean out the threads with some…
view full answer...Since our etrailer Trailer Hitch Receiver #e25TR mounts to the rear of the frame behind the bumper impact structure on your 2024 Subaru Outback Wilderness it will not require removal/loosening of the heat shields. There is enough room to get to the…
view full answer...