Bolt kit includes all installation hardware required for mounting a Gen-Y pin box to your fifth-wheel trailer.

The flexing rubber cords built into this adjustable channel limit the vertical shock when you tow your heavy construction or excavation equipment. Bolts into the adjustable channel on your trailer with the included bolts. Coupler sold separately.

This shock-absorbing shank gives you 8 mounting positions for attaching your weight distribution system. Flexing rubber cords limit shock. Tongue weight scale shows if load needs to be adjusted. Works with most standard weight distribution systems.

The flexing rubber cords built into this adjustable channel limit the vertical shock when you tow your heavy construction or excavation equipment. Bolts into the adjustable channel on your trailer with the included bolts. Coupler sold separately.

Bolt this capture plate onto your Gen-Y Executive pin box to prevent the king pin from rotating inside your PullRite fifth-wheel sliding hitch.

Replace the shank from your Gen-Y adjustable ball mount. 3 Stacked receivers let you use a ball mount, bike rack, or cargo carrier. 1,500-lb Tongue weight lets you tow heavy loads easily.

Insert this pintle lock in the empty receiver just above the ball mount in your Gen-Y adjustable mount with 2-1/2" stacked receivers. Secure the pintle lock to create a pintle hitch for hooking up a trailer with a lunette ring.

Replace the shank from your Gen-Y adjustable ball mount. 4 Stacked receivers let you use a ball mount, bike rack, or cargo carrier. 1,500-lb Tongue weight lets you tow heavy loads easily.

Insert this pintle lock in the empty receiver just above the ball mount in your Gen-Y adjustable mount with 2" stacked receivers. Secure the pintle lock to create a pintle hitch for hooking up a trailer with a lunette ring.

Replace the shank from your Gen-Y adjustable ball mount. 5 Stacked receivers let you use a ball mount, bike rack, or cargo carrier. 2,000-lb Tongue weight lets you tow heavy loads easily.

These 1/4" thick shims adapt your 12" wide Gen-Y Hitch Executive shock-absorbing pin box to your trailer that has a 12-1/2" wing width. Slide shims between your pin box and trailer wings for a tight, secure fit.

Replace the shank from your Gen-Y adjustable ball mount. 7 Stacked receivers let you use a ball mount, bike rack, or cargo carrier. 1,500-lb Tongue weight lets you tow heavy loads easily.

Replace the shank from your Gen-Y adjustable ball mount. 4 Stacked receivers let you use a ball mount, bike rack, or cargo carrier. 2,000-lb Tongue weight lets you tow heavy loads easily.

Replaces 1 Gen-Y Hitch aluminum loading ramp (325-GH-R72). 3,000-lb Capacity. 72" Long x 14" wide.

Deter wobble and get maximum stability while you tow with this stabilizer kit. Insert the shank end into one of the 2" stacked receivers on your Gen-Y adjustable ball mount, and attach the brackets on the other end to your vehicle's frame.

Replace the shank from your Gen-Y adjustable ball mount. 4 Stacked receivers let you use a ball mount, bike rack, or cargo carrier. 2,000-lb Tongue weight lets you tow heavy loads easily.

Replace the shank from your Gen-Y adjustable ball mount. 5 Stacked receivers let you use a ball mount, bike rack, or cargo carrier. 1,500-lb Tongue weight lets you tow heavy loads easily.

Replace the dual-ball mount that came with your Gen-Y adjustable ball mount with 2" stacked receivers. Tow up to 10,000 lbs with the 2" ball or the 2-5/16" ball. Zinc finish and powder coat are long-lasting.

Replace the dual-ball mount that came with your Gen-Y adjustable ball mount with 2-1/2" stacked receivers. Tow up to 16,000 lbs with the 2" ball or 21,000 lbs with the 2-5/16" ball. Zinc finish and powder coat are long-lasting.

Deter wobble and get maximum stability as you tow with this stabilizer kit. Insert the shank end into one of the 2-1/2" stacked receivers on your Gen-Y adjustable ball mount, and attach the brackets on the other end to your vehicle's frame.

Insert this pintle lock in the empty receiver just above the ball mount in your Gen-Y adjustable mount with 2-1/2" stacked receivers. Secure the pintle lock to create a pintle hitch for hooking up a trailer with a lunette ring.

Install this adapter on the 2-ball mount insert used with your Gen-Y adjustable ball mount so that you can attach up to 2 friction-style sway controls (sold separately) to your towing setup. Powder coated steel is durable and rust resistant.

Add a friction-style sway control system (sold separately) to your Gen-Y Glyder or Rebel ball mount. Set this sway control plate on top of your ball mount platform, then install the hitch ball. Tabs provide a connection point for sway control.

Install this adapter on the 2-ball mount insert used with your Gen-Y adjustable ball mount so that you can attach up to 2 friction-style sway controls (sold separately) to your towing setup. Powder coated steel is durable and rust resistant.