The Lippert Manual Pull-Out Step for RVs - Double - 7" Drop/Rise - 24" Wide - Steel - 300 lbs # LC432682 are a great option for your 1989 Honey RV. I recommend using the Lippert Outriggers for Manual RV Steps # LC301704 to give more stability to the mounting of these steps. You can use the Mounting Hardware for Lippert Electric and Manual RV Steps # LC118155-72 for this installation. view full answer...
The problem is that the overall measurement at 27-5/8 inches is from the end of the rod that extends out on both sides. The 26-1/8 inches is the dimension of the mounting brackets at the top of the steps.
I have attached a photo with dimension noted of the Flexco Manual Pull-Out Steps # SMFP-2100 you can check out. view full answer...
While the Swagman 4 Bumper Mounted Bike Rack # S80600 has a total capacity of 120 lbs, it also has a per bike capacity of 30lbs. That means the individual mounting points for each bike is not rated for bikes heavier than 30lbs.
Thankfully, bike rack technology has improved in recent years and we have more options for you! I recommend using a bumper hitch receiver like the Curt RV Bumper Hitch # E-100. This fits around 4" square bumpers and has a 350 tongue weight capacity.
For a bike... view full answer...
Hello Janet. That is actually a really good idea for a product. Unfortunately, MOrryde does not make any kind of rubber boot or cap to go on the feet of the steps. The idea is to protect the foot, keep them from getting scratched and increase friction, right?
I feel like coming up with your own rubberized protector would not be too hard. I have seen rubberized tape like "flex tape" at stores. I would cut a piece of that to fit the bottom and/or sides of the foot. This way the foot will... view full answer...
Of course!
The Aluminum Brophy Camper Scissor Steps # AS24 have a shipping weight of 28 lbs so you're looking at about 25 lbs just for the steps when you remove the packaging for shipping.
The Steel Brophy Camper Scissor Steps # SS04 has a shipping weight of 34 lbs so you're looking at about 31 lbs just for the steps when you remove the packaging for shipping. view full answer...
The SolidStep Manual Fold-Down Steps # LC678044 that you referenced is for RV doorways that are about 30" wide. Since the door on your camper is 24" wide inside the frame you want part # LC678040 instead which is built specifically for RV doorways that are 24" - 26" wide. view full answer...
While the Carpod Walled Cargo Carrier # M2205 does feature a robust 450 pound weight capacity, I can't recommend standing in or using it as a step. It may be able to hold the weight of a person but it's still going to be relatively unstable and may lead to injury.
What you could use tough is a hitch step like the Buyers Products # 3371804017 that will slide into your existing 2 inch trailer hitch receiver and provide another 2 inch receiver on the other end for the Cargo Carrier. In between... view full answer...
A camper step assembly needs to mount to a surface strong enough to support its weight load plus that of a person (or beloved pooch) on the step. Usually this mounting point will be a structural element or a frame member.
If you can see behind the desired mounting point to confirm that there is enough (and strong enough) material behind/under it then you may be able to use that alternate mount. We do not have access to construction details on the camper to allow us to tell for sure.
Another... view full answer...
For your RV, the Hickory Springs Manual Pull-Out Steps for RV 982240RFXWC1 you referenced are not able to be retracted and extended from inside the camper. You just need to extend them from the outside before entering your camper and leave them extended so you can safely exit as well.
If you want steps that can extend and retract, you will need to get the compatible electric steps with the door switch. For this, I recommend the Lippert Components Kwikee 32 Series Double Tread Electric... view full answer...
The Brophy Camper Scissor Steps # SS02 does come with the mounting bracket to attach to your RV as well as the necessary hardware. I've added a link to a video review of these steps for you to take a look at. view full answer...
Since the distance from the bottom of your door sill is 30 inches I recommend steps like part # AS23.
These steps are 24-inches wide and 8-1/2 inches deep. These steps are designed to expand from 24 to 30-inches. The mounting bracket and screws are included. Just secure the bracket to your camper and clip the stairs into the "V" clamps on the mounting bracket. Since you said you have a steel beam, you will need to drill into the frame to mount the step bracket. view full answer...
The best option we currently offer to fit a 53" entry height is going to be the TorkLift GlowStep Stow N' Go Scissor Steps w/ Landing Gear # TLA7836. These steps come with adjustable landing gears so that you can adjust to uneven terrain and have a sturdy footing and prevent that wobbly feeling you can get with standard truck bed camper steps.
The TorkLift GlowGuide Handrail for Campers and RVs with GlowStep Scissor Steps # TLA7621 can be mounted to your steps/camper in order to also... view full answer...
The TorkLift GlowStep Camper Scissor Steps # TLA7803-8000 have a horizontal bar above the top step that is the mounting bracket to connect the steps to an RV. I've linked the install details that show how it's installed.
There are also two vertical bars on the bottom step that re the including landing gear.
There's also an optional GlowGuide Handrail # TLA7621 that many people like to include with the GlowStep. view full answer...
The doorway width - the width from flange to flange of your doorway - needs to be between 23-3/4 inches and 26-1/4 inches, so yes, your 24 inch door will allow you to use the MORryde steps you asked about, which are the following part number:
- MORryde StepAbove RV Steps - 2 Steps # MR26RR
The only other thing you need to be sure of is the entry height (which is measured from the doorway threshold on your camper to the ground), as the # MR26RR is for entry heights measuring from 25 inches... view full answer...
In order to correctly measure for steps, you'd just need to measure the doorway width and the entry height and make your selection based off of these measurements.
Seeing as though you've already got steps however, you'd just need to find steps that have the same measurements.
The Prest-O-Fit Wraparound Exterior RV Step Rug - Straight # PR83SR you were looking at are step rugs that are meant to fit onto your steps to product them from damage.
Since the # PR83SR is meant for 23-1/2"... view full answer...
We do have a Lippert SolidStep that will fit, but the SolidStep Manual Fold-Down Steps for 25" - 28-7/8" Wide RV Door Frames # LC733931 are not the correct ones.
Instead, you will want to use the SolidStep Manual Fold-Down Steps for 24" Wide RV Door Frames # LC713662. view full answer...
When you install the camper side panel of the Solera Family Room # LC362230 you will be trimming out an opening for the steps to pass through.
I have attached a link to the installation instructions below but here is a picture for you to understand what it will look like.
A set of MORryde StepAbove RV Steps # MR68RR are a great way to have steps without having to worry about cutting the panel. These type of steps fold up inside the door and as the legs go all the way to the ground the... view full answer...
The largest Brophy Camper Scissor Step Assembly we currently have available is the 5-Step # AS25. These are 8-3/4 inch deep and 24 inch wide aluminum camper steps that can expand from 40 inches to 48 inches tall. The mounting bracket and hardware are included for an easy installation on your RV.
For a 6-Step Product, I recommend looking at the TorkLift GlowStep Camper Scissor Steps # TLA7506. These aluminum scissor steps are very similar to the Brophy model, however it will provide 6... view full answer...
The mounting bracket on the Brophy Aluminum Scissor Steps, part # AS24, is 25 inches long and 1-1/2 inches wide and should be placed 1/8 inch below the lowest part of the door on your RV for installation.
The steps I have that are made to bolt or weld onto the trailer frame are the Stromberg Carlson brand. They will only have single, double, and triple steps. I am including a link to a product page that will list all of the Stromberg Carlson steps I have available.
I also have the Outriggers... view full answer...
From my research and experience installing steps on fifth wheel campers your 2013 Forest River Rockwood Signature Ultra Lite Fifth Wheel the door opening should be 30" to 36". If I am correct I recommend SolidStep Manual Fold-Down Steps for 30" to 36" Wide RV Door Frames - Quad - Aluminum Item # LC791575. Most fifth wheel campers sit a little higher. Having the fourth step ensures the bottom step is not too far from the ground. The steps have adjustable legs for un-level terrain so you... view full answer...
Go To Results