You will need the Replacement Foot Pad # LC324269 for the Lippert Hydraulic Ground Control Leveling System on your 2018 Forest River Sunseeker 3010DS.
The SnapPad XTRA Jack Pads # SP54FR4 will fit your jacks if you do not already have pads for the jacks. These stay mounted on the jacks so you will not have to crawl under your RV to place and retrieve any pads. view full answer...
The replacement foot for the rear Lippert jack on the Lippert Ground Control 3.0 System is # LC377962.
You will also need a replacement 3/8 x 3 inch pin, # LC225598, to connect the foot to your jack if yours is missing. view full answer...
The Lippert Components 5th Wheel RV Landing Gear Foot Pad - 9" Round # LC314667 is the original part for the Ground Control 2.0 system, but the Replacement Front Foot Pad for Lippert Components Ground Control 3.0 Leveling System # LC362486 will work if your square jacks will fit the 2 inch square measurement on this foot. I've attached a video to assist. view full answer...
There are no replacement parts for the trailer scissor jacks, if they are damaged such as the rod being bent then you will simply need to replace the jack for which we have the Lippert Scissor Stabilizer Jack part # LC285325 or part # LC285326 for the pair. The mounting pattern is pretty standard so they should be an easy bolt-on swap for most applications. view full answer...
For your Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System w Touchpad and Remote # LC358590, the correct replacement rear foot pad is the Replacement Rear Foot Pad for Lippert Components Ground Control 3.0 # LC377962. view full answer...
Yes, we do have replacement parts available. If I am following you correctly, you are looking for the replacement lead leg for your Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System, # LC675817. This will be part number, # LC305340. view full answer...
For your Lippert Ground Control 3.0 Electric 5th Wheel Leveling System # LC358590, you can use the Lippert Components 5th Wheel RV Land Gear Foot Pad # LC314667.
I spoke with my contact at Lippert and he confirmed that these pads will work with the Ground Control system as long as your leveling leg has a hole in the end of the leg to slip the pin though to secure the foot pad.
The # LC314667 comes with 2 foot pads that each measure 9 inches in diameter. view full answer...
I spoke with Lippert and the correct replacement touchpad for your Lippert Ground Control 2.0 Leveling System is going to be the Replacement Control Panel for Lippert Ground Control 3.0 and Travel Trailer RV Leveling System # LC421484. Their tech stated that this specific touchpad is their most widely used across multiple leveling systems. view full answer...
I checked and there is no replacement threaded rod available for your Lippert Components High-Speed Power Stabilizer Jack # LC298707. If this part is damaged then you will need to replace the entire jack in order to ensure that you have the full capacity of the jack. view full answer...
Yes, we have the Replacement Pad # SN47FR for your SnapPad Mini Jack Pads # SN59FR. This will replace the one you lost on your trip. view full answer...
Yes, the correct replacement foot pad for your Lippert Electric Trailer Jack part # LC285318 is the Replacement Jack Foot Pad part # LC165253. If you need any other parts for your jack please just let me know and I would be happy to see if they are available. view full answer...
Yes, to get just a single out of the SnapPad Jack Stand Pad System - 9" Round Jack Feet # SN78FR you just need part # SP54FR and you're good to go! view full answer...
It sounds like you're looking for the Replacement Pad for SnapPad Jack Stand Pad System - 10" Octagon or Round Concave Jack Foot #SP84FR, which is for 10" diameter octagonal jack feet. This is sold as a single pad instead of the 4 pack.
If you need a different part, just let me know and I can help you locate the one you're looking for. view full answer...
The SnapPad Jack Stand Pads for Class C Motorhomes part # SP24FR4 can be purchased individually using the Replacement Pad for SnapPad Jack Stand Pad System part # SP24FR.
In regards to warranty, this is to protect you from manufactures defects only. view full answer...
I do have a solution for you, however the Replacement Foot Pad # 2500-3755G referenced in your question is designed specifically for certain electric jacks made by Stromberg Carlson so I cannot confirm if it will work well for your existing jack.
For your 12V Electric Jack # 3370093500 (part 0093500 from Buyers Products) you will need the Replacement Foot Pad # 3373013261. This will work perfectly for your jack and is exactly what the jack would have originally been equipped with. view full answer...
You will need the Replacement Foot Pad # 2500-25 for your Stromberg Carlson Electric A-Frame Tongue Jack # JET-2500. You can see this foot mounts on the outside of the inner tube while the Replacement Foot Pad # 2500-3755G you found fits inside the larger tube on the Jack # JET-3755. We do have the Pin # 2500-26 for this as well.
If your concern is with the amount of time waiting on the jack to raise and lower we do have the Stand # A10-0900 which is 8-3/8" tall and will greatly reduce... view full answer...
For your Lippert Level Up Hydraulic Leveling System, you can use the:
-Replacement Foot Pad for Lippert Hydraulic Ground Control Leveling System # LC324269.
These replacement feet are 9" in diameter, and also includes the o-rings, the bolt, and washers.
Additionally, since you mentioned that your foot pads had become bent from use on soft surfaces I recommend also getting a set of snap pads:
-SnapPad XTRA Jack Pads for Lippert Leveling Systems w/ 9" Round Jack Feet # SP54FR4.
These... view full answer...
Since the diameter of the replacement foot pad part # LC359344 that you referenced is 10-1/2 inches the correct SnapPad would be the # SP84FR4. view full answer...
We do not carry any replacement parts for your Barker VIP 3,000 Power Jack, however if you measure your jack leg's diameter, and the measurements match with # LC165253, then you should be able to use it. view full answer...