Replacement SnapPad Jack Pad For 6" SnapPad Mini Jack Pads # SN59FR

Question

Question:

Do you have a replacement pad for this Snap pad kit? I only need one as it fell off somewhere during our trip.

asked by: Wayne A

0

Expert Reply:

Yes, we have the Replacement Pad # SN47FR for your SnapPad Mini Jack Pads # SN59FR. This will replace the one you lost on your trip.

expert reply by: Bud M

0

Answer 1

For a great set of circular jack foot pads for your trailer, I recommend the SnapPad Mini Jack Pads for Class C Motorhomes and Travel Trailers w/ 6" Round Jack Feet #SN59FR. The great thing about the SnapPad is that it comes with built-in…

view full answer...

Answer 2

In order to minimize sway on your 2020 Wayfarer Class C, I recommend starting with the Roadmaster #RM-1209-131 since sway begins at the rear of the coach. Adding a rear sway bar is, in most cases, the quickest and most common way to combat sway…

view full answer...

Answer 3

I do have an option for you, but we do not carry the Dexter 072-027-00 you mentioned. However we do have the etrailer Double-Eye Spring for 7,000-lb Trailer Axles - 24-7/8" Long #e64SR which will be 3/8" shorter but that is still…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

Kenny, those bolts for the B&W Companion 5th Wheel Trailer Hitch #BWRVK3500-5W should be torqued to 40 ft. lbs. Also, the pivot arms would need to be torqued to 80 ft. lbs, the draw down bolt should be tighten to 60 ft.lbs and the arms should be…

view full answer...

Answer 6

I went out to our warehouse and test fit some SnapPads on the feet of the Lippert High-Speed Power Stabilizer Jack #LC298707 and found that the 6" square SnapPads were a fit. If your 2022 Forest River Vibe travel trailer only has one #LC298707…

view full answer...

Answer 7

Hey Joe, yes the Lippert stabilizer jack part #LC298707 does fit your Grand Design Transcend 245RL but it is sold individually so if you wanted a set for the front and the rear you would need to order a quantity of two.

view full answer...

Replacement SnapPad Jack Pad For 6" SnapPad Mini Jack Pads # SN59FR

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching