I have a solution for you, but in order to replace the spring component on your Bulldog jack you would need to purchase the entire Replacement Gear Kit for Bulldog Sidewind Jacks w/ 12,000-lb Capacity # BD500212. This would be the only way to get the appropriate spring for this jack.
Parts like this do malfunction occasionally, so it might be worth having the extra parts on hand in the event that the gears stripped out at some point in the future. You could also completely change all... view full answer...
For your Extang Trifecta 2.0 on your 2017 Honda Ridgeline, you're going to want the Replacement Tarp for Extang Trifecta 2.0 Soft Tonneau Cover # EX24VR for a replacement tarp. view full answer...
The correct replacement mounting brackets for Aries Grille Guard part # AA6057 is the Replacement Mounting Hardware Kit for Aries Automotive Grille Guard part # AA72DQ. view full answer...
For the Truxedo Lo Pro # TX1704187 that you have on your 2007 Honda Ridgeline the header seal you'd need as a replacement is the # TX1704787 and then for the header stop you'd need the part # TX1702801. view full answer...
I haven't heard of anything factory that has that screw on each end of the hinge. It sounds like somebody simply chose to add the screws. We do not have a replacement for that specific cover if it was an off-brand replacement with that design.
My recommendation is to go with one of the standard 4 types of covers whichever best fits your application. It sounds like the Vent Cover for Ventline Old-Style Rounded Dome Trailer Roof Vents - Smoke # BV0554-03 with the bendable hinge may... view full answer...
The TruXedo Lo Pro QT tonneau cover that fits your 2008 Honda Ridgeline is their part # TX520601. For this cover the replacement tapered weather seal for the sides is part # TX1114731. Please note this is sold by the foot so you can order what you need for the repair and have some extra on hand if you like. The replacement Header Seal is part # TX1704787 and this fits both the front or back header. view full answer...
For your 2009 Honda Ridgeline EX-L with Truxedo Lo Pro QT # TX520601 the offset latch you are looking for is the # TX1116224. My contact at Truxedo confirmed that fit. view full answer...
I have a solution for you, we do not have coach specific information when it comes to components like steps, so you will need to look on your existing steps for some sort of identifying information; you'll want to find the number on the motor, how many steps, and the model number of the steps in order to determine if your old motor, linkage and gear box can be re-used.
With that said, you'll likely need something like the Replacement Step Frame for Kwikee RV Electric Steps - 32 Series... view full answer...
A Dexter 3500 lb axle typically has spindles compatible with an L68149 outer L44649 inner wheel bearing (you'll want to check your existing bearings to confirm). If that's the case, and assuming your current hubs have a 5 on 4-1/2 inch bolt pattern, I'd recommend the # AKHD-545-35-EZ-K hub drum which includes the bearings, grease seal, races, dust cover, lug nuts, spindle nun and the spindle nut retainer.
For the compatible complete brake assemblies, I'd recommend the Dexter self adjusting... view full answer...
For your 2013 Honda Ridgeline, we will have a roof rack solution for your application. Unfortunately, Thule does not have a kit that will allow them to install the Podium feet on to the Honda Ridgeline.
The recommended bars are the 47 inch SquareBars, part # TH712200. If these are what you have then they can be reused with the Evo clamp feet # TH710501 and fit kit # TH145191. view full answer...
I believe the 7-way on your Ridgeline plugs into a US car connector. You can check this by unplugging the damaged 7-way connector from the wiring harness that plugs into the back of it, and comparing what the connector looks like, compared to the left-hand panel in the photo I've provided for you. If they match, you can use the # HM40975 as a replacement for your 7-way.
We don't have the OEM Honda part, but this connector will provide you with a functional 4-pole, as well as the 7-way.... view full answer...
I show that the wheel lug size for Dexstar Vintage Steel Wheel # AM20312, which you reference is 1/2 inch x 20, therefore you will want Americana Trailer Wheel Lug Nut # AM90049. These trailer wheel lug nuts fit 1/2" diameter wheel bolts and are chrome plated for durability and corrosion resistance.
I have included a video review of Dexstar Vintage Steel Wheel # AM20312 for you to check out. view full answer...
It looks like you have the Pop & Lock Custom Tailgate Lock # PAL8600. This kit includes the:
- Electrical Lock assembly and Slide Bolt
- Locking Bolt Linkage
- Zip Ties
- Long and Short Wire Harness
I do not see anything about a tension spring. It is possible that it is a part already present on the handle of your Ridgeline. If that is the case, we would not have the part. If it is one of the items in the # PAL8600 kit, we do not have replacement parts and a new # PAL8600 would be needed. view full answer...
I checked with Furrion and the 7 inch and 5 inch monitor version of the Furrion observation system # FOS07TASF use part # FR79SR. The smaller 4.3 inch size use the part # LC776462. view full answer...
I could not locate any information on a Ridgeliner soft cover, but it sounds like it may be an OEM cover. The OEM covers are often times produced by another company and rebranded as Honda or Ridgeliner. If you know who manufactured the cover, we may have a replacement cover for you if it is one of the manufacturers we carry.
Otherwise, the only option we would have is to buy a complete replacement cover like the TruXedo Lo Pro Soft Roll-up Tonneau Cover # TX530601. view full answer...
Yes. The T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector, # 118400, can be used to bypass factory tow package wiring in your 2008 Honda Ridgeline. As long as the functions at your tail lights are working correctly, this wiring harness can be used to give you the 4-way flat connector.
Before replacing, you may want to check fuses and put a circuit tester like # PTW2993 on the wires to test functions. view full answer...
The Pop & Lock Custom Tailgate Lock - Manual - Black, part # PAL6100, is compatible with your 2007 Honda Ridgeline and it is compatible with your vehicle's backup camera. Unfortunately, it only comes in black. You will have to get it custom painted to match the dark cherry of your truck.
I have included a video installation link and a video demo link below. view full answer...
From what I could find, it looks like your OEM tonneau cover is most likely the Extang Solid Fold 2.0 Hard Tonneau Cover EX83590. If that is the case, the correct hinge seals would be the:
- Replacement Hinge Seal for Extang Solid Fold 2.0 Tonneau Covers # EX32560669
I have also listed the other seals/endcaps that we have for that cover below.
- Replacement Tailgate Seal for Extang Solid Fold 2.0 Tonneau Covers # EX32563200
- Replacement Cab Hinge Cap Kit for Extang Solid Fold 2.0 Tonneau... view full answer...
You will need to replace your Aries Bull Bar # AAB35-6001 for your 2013 Honda Ridgeline. Aries no longer manufactures the mounting hardware separately from the Bull Bar for your Ridgeline. view full answer...
As long as your tonneau is a manually retracting Retrax tonneau the replacement lock kit part # RTX25QR is what you'd need. If it was a power retract tonneau we wouldn't have a replacement for it. view full answer...