We do indeed offer a replacement socket pin and clip for the Equal-i-zer # EQ37100ET. The pin and clip retain the spring bar into the hitch head. The pin is available as part # 90-03-9212. The retaining clip, if you need it is part # 90-04-9216. view full answer...
The Replacement Lift Bracket for Curt Weight Distribution Systems part # C17008 does use a standard clip that can be found on hitch pins similar to the Hitch Pin Clip part # 37201011 view full answer...
We do offer the Replacement Adjustment Pin and Clip # BWTS35010 for your B&W Tow & Stow 2-Ball Mount # BWTS20040B. The clip is 0.148" in diameter and made from steel. I recommend replacing the pins and clips with the InfiniteRule Locking Pins # 34061775-D. This will allow you to secure the hitch and its parts to your vehicle and not have to worry about losing the small clips again. view full answer...
The Replacement Hitch Bolt and Clip for Yakima HoldUp and BigHorn Bike Carriers # Y8890200 doesn't require the clip as the threaded bolt works to secure the rack. If you really want the pin, you can use the Hitch Pin Clip - 1/2" - Qty 1 # 37201131 which will work well but is made by a different manufacturer.
If you want even more security, you can add the Yakima HitchLock for Yakima Hitch Mounted Bike Racks - Same Key System (SKS) # Y07235 that replaces that clip and adds a lock for greater... view full answer...
From my research the Bell Hitchbiker 450 is basically the Swagman Trailhead 4 Bike Rack for 1-1/4" and 2" Hitches - Tilting # S63380 with a couple custom features. For the hitch pin, I recommend using the Locking Anti-Rattle, Threaded Hitch Pin for Swagman Hitch Racks # S64029 as the threaded pin and clip are not a replacement part available. view full answer...
The replacement pins and clips to secure your Reese fifth wheel hitch, part # RP30035 to your base rails is part # 6014.
The # 6014 comes with 4-pins and 4-clips so this will work great for you. view full answer...
For your Demco Hijacker Autoslide 5th Wheel Trailer Hitch w/ Slider # DM8550034 you can buy the replacement pins and clips here: Replacement Pull Pin and Clip for Demco Hijacker Autoslide 5th Wheel Trailer Hitch # DM92VR. If you need the complete side plate kit with pins/clips included, use Replacement Side Plates for Demco Hijacker Autoslide 5th Wheel Trailer Hitches - Above Bed Mount # DM6003. I have attached a demonstration video for the side plate kit. view full answer...
For the Draw-Tite Pin and Clip For Class III, IV and V Trailer Hitch Receiver # PC3, the manufacturer part number is PC3. It is a 5/8 inch diameter pin with the retainer clip. I don't know why it isn't on their website, but we get the part from the manufacturer that makes Draw-Tite, Reese, and Hidden Hitch brands. view full answer...
The replacement Hitch Bolt And clip you need for your Yakima Roc N Gate bike carrier is part # Y8890200.
This kit includes the hitch bolt, washer and clip you need. view full answer...
We do carry the Pins and Thumb Clips # EQ95-01-9415 to hold the spring bars in place if you prefer them over the Socket Pin # 90-03-9212 and Clip # 90-04-9216. I personally have never dealt with any issues of these pins and clips falling out. Since these are trunnion bars they sit higher on the hitch and are not as likely to just fall out. Typically the L-Pins and Clips # EQ95-01-9430 are the ones I see people replacing and that is generally due to them being misplaced rather than falling out. view full answer...
It sounds like you are looking for the Replacement Threaded Hitch Pin and Clip part # P5902 which is correct for a Swagman XC2 Bike Rack. If this is not it please just let me know. view full answer...
For a Curt Friction Sway-Control Bar like # 17200 or the Reese # 83660 you can use the Replacement Ball and Plate Assembly for Curt Friction Sway Control System # C17201. This will include the frame ball and hardware as well as two clips. The clips are not available separately.
Spring Clips for Hitch Pins like # 337HP9 will work for that application as well even though the styles are different. view full answer...
We can provide you with several options for a replacement hitch pin to secure your Swagman Original # S64152-2 to your 2-inch hitch receiver.
The most cost-effective option is a simple pin and clip set, part # PC3. This fits a Class III or Class IV hitch that has a 2-inch receiver opening with a 5/8-inch hitch pin hole. This pin and clip do not lock the carrier to your hitch.
If you wish to add some anti-theft and anti-rattle capability to your bike carrier you could instead use the Swagman... view full answer...
We have the Curt Spring Bar Retainer Package # 17109 that will replace the pins and clips for your Curt MV Weight Distribution System # C17052. view full answer...
The Gen-Y Pin and Clips are available as part # 325-GH-096 for a 2" hitch and part # 325-GH-099 for a 2-1/2" hitch, but the clips are not available separately.
We do have standard pins, like the Curt # C21600 which fits both options, but none from Gen-Y with that turn at the end. view full answer...
For Clips only compatible with the Curt Friction Sway Control System you can use either the Spring Clip for Hitch Pins, Pull Pins and Sway Control # 55515 or the Replacement Pin for Friction-Style Sway Control Systems - Qty 1 # 37201001. view full answer...
Yes. The Replacement Rail Pins and Clips for Curt 5th Wheel Trailer Hitches and Gooseneck Adapters - Qty 4, # C16902, will fit your universal base rails and adapter frame. They are industry standard size pins and clips. view full answer...