Replacement Pin And Clip For Tilt Mechanism On Thule Hitching Post Pro Bike Rack

Question

Question:

Do you sell hitch pin and clip replacements for the folding arms and to rotate rack down? Thanks,

asked by: Stefanie

0

Expert Reply:

Yes, the replacement pin and clip for the tilt mechanism on Thule Hitching Post Pro 4 Bike Rack # TH934XTR is # 853-5210-02.

expert reply by: Andrew N

0

Answer 1

If you wanted to remove some of the wheel trays of the Hollywood Racks Destination bike rack part #HR4000 you certainly could as like you said they are all bolted on independently.

view full answer...

Answer 2

I would be happy to help clarify the confusion and set your 2022 Toyota Highlander XSE up with a hitch for your bike rack. The etrailer Trailer Hitch Receiver item #e75ZR does fit your Highlander XSE. This hitch is custom fit and bolts directly to…

view full answer...

Answer 3

The Anti-Sway cages on the Thule Hitching Post Pro #TH934XTR bike carrier can be seen in the linked photo and in the video at about the 2:40 mark. The anti-sway cages and straps secure the bike frame tube and front wheel to avoid the bikes moving…

view full answer...

Answer 4

On average, the Hollywood Racks Destination Bike Rack Item #HLY94FR has anywhere between 3.5" to 4.5" of clearance from the hatch/rear bumper of most vehicles. This all depends on how exposed your hitch receiver is from the rear of your…

view full answer...

Answer 5

The etrailer Trailer Hitch Receiver part #e75ZR which is a fit for a 2021 Toyota Highlander does have a hidden design which means the crosstube will not be visible, just the receiver tube. I have attached a photo below of the same hitch with a…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

The Yakima EXO Swing Away 2 Bike Rack w/ Enclosed Cargo Carrier #Y34ZR will restrict the passenger side door on your 2024 Entegra Expanse. When the arm swings out it will be sitting at that corner of the vehicle which means the door will be able to…

view full answer...

Answer 8

I confirmed with EcoHitch and their Trailer Hitch Receiver #EH39FR was just confirmed to fit your 2024 Tesla Model Y this week. This is great since the receiver opening is accessible through the rear cover plate just like a factory option.

view full answer...

Answer 9

Per the linked installation instructions which you can click below the torque is 86 ft-lbs for the 12mm hardware when installing the etrailer Trailer Hitch Receiver #e75ZR on the 2023 Toyota Highlander.

view full answer...

Answer 10

Both of these Thule racks will do an excellent job of safely and economically hauling four bikes (assuming you aren't using a Class I hitch, which has a manufacturer recommended limit of hauling two bikes at a time). The Camber #TH9056 is lighter…

view full answer...

Answer 11

Yes, the Curt cargo carrier 18153 will fit the Curt Trailer Hitch Receiver #C26VV on your 2024 Grand Highlander. The 2" shank matches the 2" receiver on the hitch.

view full answer...

Answer 12

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Replacement Pin And Clip For Tilt Mechanism On Thule Hitching Post Pro Bike Rack

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching