Yes, we do have the cover you are needing for your Roadmaster Falcon All-Terrain Tow Bar # RM-522 separate from the Roadmaster Accessory Kit for Falcon 2/All-Terrain Tow Bars # RM-9243-1.
The cover that you are needing is the Roadmaster Tow Bar Cover # RM-055-3. view full answer...
Depending on the 7-way connector you presently have, we might have a very easy solution for you.
Take a look at your existing 7-way, and see if it's possible to unplug the factory harness from the back of the connector. There will be a gray locking tab that needs to be slid toward the front of the vehicle before the connector can be unplugged. If it's possible to unplug the harness, the Tekonsha # 74682 would be a perfect plug and play replacement.
If you cannot unplug the connector from... view full answer...
The screws that are part of the hardware cannot be purchased separately from the Replacement Mounting Hardware for Lippert Solera Slide Topper # LC701665.
Those screws are only with this kit. view full answer...
If you are wanting to replace your Series 39 electric step directly then what you will need is the Lippert Kwikee 39 Series Electric Step # LC3724742 which comes with the motor, gears, control module, and switch kit with the wiring adapter.
Attached is a wiring diagram (which some of the connections are already completed) and an installation video for you to reference if you are going to be doing the installation yourself. view full answer...
The replacement for your factory 7-way on your 2004 Ford E-450 Box Truck is the Tekonsha Replacement Multi-Tow 7-Way & 4 Pole Trailer Connector, # 74682. This will give you a 7-way and 4-way connection with a simple factory socket the industry calls the U.S. Car Type Connector. There is no splicing needed. I've attached a review and an install video for you.
The Tow Ready Replacement Wiring you mentioned, # 118243, was for up to 2001 models with only the 4-way factory connector. view full answer...
I do have a replacement 4-way option for your 2010 Ford Van, but it doesn't quite install like your factory harness did. You'll need the Curt # C56020 which plugs in inline of your tail light connectors and gives you the functional 4-way connector you're looking for.
I have attached an installation video of the # C56020 for you to take a look at. view full answer...
From what I could fine it looks like the correct replacement for your 2002 Ford E-450 is part # WM9072F. This is a 32 mm jam nut so I do recommend double checking what you have to ensure that this fits. view full answer...
I reached out to my contact at Demco who said that the master cylinders for the older (80s) Kar Kaddy 2 either used a Demco actuator or a Dico actuator. If you have the Dico actuator then you need part # T4395100 for drum or part # T4820000 for disc brakes. If you have the Demco version let me know and I can point you in the right direction.
For the wheel cylinders you need part # DMSB9777M for the left side and part # DMSB9776M for the right side. view full answer...
I reached out to Dexter and they no longer make that axle. I can confirm based on the bearing sizes you gave that you have a 3,500 lb capacity. If you determine you just want to replace the hub, I recommend the Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 # 84546UC3 or # AKHD-545-35-EZ-K if you have the grease zerk integrated in the spindle.
Since we can't match the spring seat to spring seat dimensions if you want to replace your axle I recommend using... view full answer...
It sounds like you're looking for a replacement spring for a rear Firestone Ride-Rite system on your 2005 E-450 Class C motorhome.
The part # F9000 that you mentioned won't fit your application but we do have replacement air bags that should, depending on what air bag kit is installed on your motorhome:
Air Bag Kit # F2153 - Replacement Air Spring # F6781
Air Bag Kit # F2377 - Replacement Air Spring # F6397
If you have something else please let me know so I can assist you further. view full answer...
To replace just the hat bushing for your Roadmaster End Link Kit # RM-590230-00 you will need the part # RM-205223-00. For the metal sleeve that the bushings install around you will need the part # RM-205501-00.
Each of these will include one bushing or sleeve so in order to replace the bushing and sleeve on both ends of a single End Link you will need to order a quantity of 2. If you need to replace both ends on both of the End Links you will need 4. view full answer...
Thank you for including a photo; it's always a huge help!
I may have a solution for you, but I'm not seeing anything we have as far as replacement lenses that would would for this Command Electronics tail light on your 1999 Gulfstream Class C. Additionally I'm not seeing anything close to your light as an available replacement from Command, so it might be discontinued and the light would need to be replaced completely.
If that ends up being the case we do have some options that are... view full answer...
Trailer jack weight ratings are basically for the tongue weight that they would be lifting. Their rating is not for the entire weight of the trailer.
So the Ultimate Trailer Jack part # 322-RDJ-2K that you referenced has a 2,000 lb lifting capacity which would be more than enough for your 5,300 lb trailer which would have a tongue weight most likely of around 500 lbs. view full answer...
I'm sorry to hear that the nuts to install your Curt Trailer Hitch Receiver # 14055 on your 2002 Ford Van stripped.
For replacement hardware you will need the replacement hardware kit # RHK and select Curt from the drop down menu, and for model enter 14055. This is the only option to get the correct replacement nuts as we do not sell the required 1/2-13 grade 8 nuts with serrated flange separately. view full answer...
The Firestone Air Ride system that fits your 2013 Ford Van and uses the 6781 air bag is the Firestone Ride-Rite Air Helper Springs # F2153. The correct replacement parts are listed below:
- Replacement Air Spring for Firestone Ride-Rite Kit # F6781 (this is the 6781 bag)
- Replacement Lower Bracket for Firestone Ride-Rite Rear Helper Springs # F5092
- Replacement Carriage Bolt for Firestone Air Springs # F2135821149 (x2)
- Replacement 3/8"-16 x 7" Carriage Bolt for Firestone Ride-Rite... view full answer...
We have isolators like the Deka part # DW08771 which was designed for this situation. It will charge both batteries while also keeping them separate which means they wouldn't be in parallel. view full answer...
The wheel we have that matches the specs you asked about comes from Taskmaster:
- Vesper Steel Dual Wheel - 16" x 6" - 8 on 6-1/2 - 4.77" Pilot # TA56FR
The only thing that doesn't match is that this has a silver powder coat finish as opposed to the galvanized finish. Unfortunately we don't have any wheels like this with that finish you're looking for. view full answer...
The recommended 55A replacement for your Parallax 7300 would be the Progressive Dynamics # PD4655V for flooded lead acid, AGM and Gel batteries.
Progressive Dynamics offers a 1000 watt pure sine-wave inverter/transfer switch, part # PD1210SR that would be a good choice if a 2000 watt surge/1000 watt running output would meet your needs.
I've linked to product description videos for the items mentioned above. view full answer...
Go To Results