There are a few things you can do to add brakes to your popup camper;
1. You can have the Brake Mounting Flange # 4-35 welded onto your current axle by a professional.
2. You can use the Timbre Axle-Less All-In-One Kit # A35RS545E which uses a different suspension system but comes with the brakes and hub/drums.
3. You can purchase a standard axle through a trailer shop that can custom order them.
I personally like the Timbren kit since it comes with everything you need plus it gives... view full answer...
The Right Replacement Endcap # TH1500052334 and Left Replacement Endcap # TH1500052333 are the correct parts for the Thule AeroBlade Edge Crossbar TH7603B that fits your 2016 BMW X5.
The Thule Change Key # 853-1251 is needed to move any Thule one key lock cylinders you may have from your old endcaps to the new endcaps. view full answer...
We do indeed sell replacement install hardware for Hidden Hitch, Draw-Tite and Curt Hitches.
The part number you need is # RHK. Clicking the provided link will take you to the product page, where there's a field to type in the hitch part number, and a drop down menu for the hitch manufacturer.
For a taillight wiring harness, use the Tekonsha ZCI Circuit Protected # 119250KIT. I've linked you to some installation videos and an FAQ article that I hope you'll find helpful. view full answer...
Yes, you will be able to use the LED Combination Tail Light Kit for Trailers under 80" Wide - Submersible - Driver and Passenger # TLL9RK to rewire and add lights to your trailer. There are no kits available that come with a 7-way wired in since it is not required to power the trailer's signal lights.
I'm assuming you have a 7-way on your 2010 BMW X5. If that is the case then yes, you will be able to use the Pollak 7 Pole to 4 Way Connector Adapter # PK12716 to connect to the trailer... view full answer...
I spoke to my contact at Swagman and she told me they no longer have the tire cradle straps in yellow. They are only available in black, Replacement Wheel Strap for Swagman Chinook, Dispatch, E-Spec, G10, and Quad Bike Racks - Qty 1 # S95YR.
Please note that this is sold in quantities of 1, so you will have to order 4 if you need to replace them all. view full answer...
You'll need our RHK replacement hardware kit. Use the provided link and go to the product description page, type in '13077' in the provided field and choose 'Curt' from the nearby drop down menu. This will get you the necessary hardware to install the # 13077 hitch.
I've linked to the installation instructions, as well as to an install video. view full answer...
There is replacement hardware available for your Curt hitch # C13162. You need Replacement Hardware Kit for Trailer Hitches # RHK; on the product page simply enter "C13162" under the "Hitch Item Number" box and select "Curt" in the drop-down box next to "Manufacturer" and you'll be set. view full answer...
For your Thule EasyFold XT # TH903202, you can replace the Replacement Locking Knob for Thule Bike Racks # TH79JV, however for the bolt Thule does not offer this as a replacement.
As far as the bolt goes, I recommend removing the old bolt and taking it to a local hardware store to see if they can match it. view full answer...
We have the Surco Universal Exterior RV Ladder, # SP501L along with the Surco RV Ladder Extension, # SP504L. The the Surco, # SP501L allows for customization of length and to fit with contours. Please note the attached images. Even if you do not require the feature of adapting to contours, even in a straight fit it allows for length adjustment. view full answer...
The rubber inside the Equa-Flex Cushioned Equalizers part # LC314336 is not replaceable, you'll have to replace the entire equalizer if yours are worn. It's hard to say about lifetime expectancy as this will vary from trailer to trailer and climate to climate. If you feel yours wore out too soon, make sure you are not overloading the trailer and that everything else like the leaf springs are in proper working order. view full answer...
The bearings in trailer hubs are measured to very precise dimensions, to the nearest thousandth of an inch, such as 1.234-inches. To find a suitable replacement hub to fit on your existing trailer spindles either the bearing part numbers or these precise measurements are needed to ensure you select a hub that fits on the spindles. The new hub must use the same bearings as the original.
If you refer to the linked photo you'll see how these part numbers typically appear on bearings. If these... view full answer...
There is indeed a replacement disc brake master cylinder that is compatible with the Titan Model # 10 hydraulic brake actuator. The replacement is part # T4747100. The # DX66FR you referred to should be used on drum brake systems only.
Swapping out your current master cylinder for this part will enable your coupler to work with disc brakes. view full answer...
I recommend the Thule SnowPack, available as part # TH7326 for the base model and with a slide out feature as part # TH7325. These racks are great, easy to install and remove from your factory crossbars, and allows for a little more flexibility in when and how to use, as they double as a great way to transport fishing rods during the spring and summer.
Both of these carriers include four keyed-alike locks for added security and I've included video reviews of these racks so you can get... view full answer...
Sure thing!
For your Yakima FullBack 2 Bike Rack # Y02634, you're going to want the:
-Replacement ZipStrip Straps for Yakima SuperCush Bike Rack Cradles # Y55XR.
Attached is a review video for you to check out as well. view full answer...
The easiest way to identify the needed replacement bearing kit is to obtain the reference numbers off the existing bearings. Your best bet would be to clean the existing bearings and closely examine them for the reference numbers.
Given the inside diameter you provided, the bearings could be a # LM67048, # 15123 or # 14125A, all of which have a 1.25 inch inside diameter. All three bearings are listed as outer bearings for certain hubs, none of the hubs we offer would use these as both... view full answer...
The correct replacement lead landing gear leg for a Ground Control 2.0 Leveling System is the Replacement Heavy Duty Driver Leg for Lippert Ground Control 2.0 Landing Gear part # LC241846 for standard (29-1/2" outer tuber body) or part # LC241845 for extended (33-1/2" outer tube body). view full answer...
The Replacement Universal Change Key # 59321 is designed to only remove and install unlocked lock cores so it unfortunately will not unlock a locked core, plus it isn't compatible with the "R" series of Rola cores.
Your best best to continue using that roof rack is to have a locksmith create a new key for you since the Rola line of products has been discontinued. If you'd rather switch to a new roof rack system that currently has parts available for your 2007 BMW X5 then I recommend checking... view full answer...
Yakima has determined that the PowderHound Roof-Mounted, Locking Ski and Snowboard Carrier is a fit for your 2016 BMW 3 Series 4 Door with Factory Roof Rack. This carrier uses the mounts you referenced # Y8860040, and will fit on your factory crossbars.
These mounts will fit on factory crossbars that measure no more than 3-7/8 inches wide by 1-1/4 inch tall. As long as your BMW crossbars are smaller than 3-7/8 inches x 1-1/4 inch, the # Y8860040 mounting hardware will work well for you. view full answer...
The bumper beam mount studs on the 2013 BMW 128i are part of the factory bumper beam/trunk panel mount assembly. If they are not present then someone on the assembly line wasn't paying attention! The hitch installation should not have been completed if those studs were missing.
The nuts could have been cross-threaded on which would mean that the threads on the studs would have to be re-cut. Regardless to get the properly rated nuts for the hitch you will need # RHK. Enter the hitch number... view full answer...
Go To Results