Expert Answers about Hyundai Tucson

• Trailer Hitch Recommendation for 2017 Hyundai Tucson Sport
• I think you gave them solid advice...but as far as if a trailer hitch will void the warranty that answer is no. When you install an aftermarket part on your vehicle like a trailer hitch in this case, you are protected by the Magnuson–Moss Warranty Act. This act states, in part, that unless the installation and the part caused a problem then the warranty cannot be voided. I recommend looking it up online. For a hitch I would recommend the Draw Tite part # 75836 which is a confirmed fit...
  view full answer...


• How to Transport Two 113-Lb Predator Kayaks on 2014 Hyundai Tucson
• Your extremely nice pedal-powered Predator fishing kayaks (can you smell my envy?) are much too heavy at 113-lbs each for any sort of roof rack option on your 2014 Hyundai Tucson. Their 11-foot length also makes a trailer option such as the Yakima Rack and Roll Trailer # Y08107 or # Y08106 your best bet. Both trailers come complete with either 78-inch or 66-inch-long round crossbars to which you can secure the kayaks. The bar spacing and open trailer frame allow space for the kayak's propeller...
  view full answer...


• Hitch Step That Does Not Extend Out For 2 Inch Hitch
• There is one option for a hitch step for your 2 inch hitch that won't extend out much past the bumper, and that's with a hitch step that flips up (and down), from Carr: - Carr Hitch Mounted Step for 2" Trailer Hitches - Black # CARR183252 or Reflective Finish # CARR183012 All of the other steps are going to protrude out a good distance from your 2 inch hitch, but since the step on this flips up and down, it won't stick way out will be the closest to the rear of your Tucson. You'll also...
  view full answer...


• Roof Rack and Paddleboard Carrier Recommendation for 2011 Hyundai Tucson with Sunroof
• Not all of our roof rack manufacturers have fits for your 2012 Hyundai Tucson that has the sunroof/moonroof, but the Yakima roof rack you referenced part numbers # Y00425, # Y28TR, # Y06175, and # Y06178 does fit and would be a great option for carrying a paddleboard. Once this is installed the Thule SUP Taxi part # TH810001 would do a great job to carry up to two boards.
  view full answer...


• 3 Bike Yakima Roof Rack Recommendation for 2017 Hyundai Tucson
• I have a great solution confirmed as a fit for your 2017 Hyundai Tucson but the Yakima Quickback that you referenced has been discontinued. Instead the Yakima Fullback 3 part # Y02633 would be a great option. In a lot of ways this is the evolved version of the Quickback. It is designed to fit as many vehicles as possible easily, is lightweight, and is loaded with features. I attached a review video for this rack for you to check out as well. If you plan on carrying any womens or alternative...
  view full answer...


• Does Curt Hitch for 2017 Hyundai Tucson Need Stabilizer Strap to Carry Bike Rack
• Actually the Curt Hitch part # C13240 that is a fit for your 2017 Hyundai Tucson does not require the stabilizer strap so it would not be needed to carry the Thule Camber part # TH9058. If you plan on carrying any women's or alternative framed bikes without horizontal top tubes you may also be interested in purchasing a Kuat Bike Frame Adapter Bar # UB01 to provide a horizontal top tube on your bikes to provide an attachment point. I attached a review video for this product also. This...
  view full answer...


• Recommended Trunk-Mount Bike Carrier Compatible With 2017 Hyundai Tucson
• I have some options for you, but the Saris Bones 2 Bike Rack - Trunk Mount - Adjustable Arms # SA805BL has not been confirmed to fit your 2017 Hyundai Tucson and for that reason I do not recommend it. I recommend looking into the Yakima FullBack 2 Bike Rack - Trunk Mount - Adjustable Arms # Y02634. The FullBack features a 4-strap mounting system and interlocking HUB for quick setup on your Hyundai Tucson. The adjustable arms have SuperCush anti-sway cradles with ZipStrip straps for easy...
  view full answer...


• Which 1 1/4 inch to 2 inch Adapter Offers More Ground Clearance
• The largest rise 1 1/4 inch to 2 inch adapter option is the Brophy Hitch Adapter 1-1/4" to 2" Trailer Hitch Receiver with 5" Rise # HT5R. Please keep in mind that use of a trailer hitch adapter will reduce the tongue weight rating of your trailer hitch receiver by 50%.
  view full answer...


• Would Same Hitch Fit 2014 Hyundai Tucson and 2024 Tucson
• The 2014 and 2024 Hyundai Tucson models are different enough that the same hitch would not fit both vehicles. So what that means is the old hitch you have now cannot be installed on your 24 Tucson and you'd need to go with a new hitch like the Draw Tite part # DT22MR that you referenced.
  view full answer...


• Trailer Wiring Harness for 2023 Hyundai Tucson without Tow Package
• For your 2023 Hyundai Tucson there are only universal style trailer wiring kits available like the # 119190KIT. It doesn't seem likely a plug and play harness will ever get released.
  view full answer...


• Recommended Bike Rack for Beach Cruiser on 2011 Hyundai Tucson
• The Thule Passage 2 Bike Carrier # TH910XT referenced in your question, which is confirmed to fit your 2011 Hyundai Tucson, features a weight capacity of 35 pounds per bike. If your beach cruiser is less than 35 pounds, this carrier will work well. You will likely need to add an adapter bar like the Kuat # UB01 because of its alternative frame to secure it to the rack. I have attached a short video demonstration on this product so you can see exactly how it works and why it might be needed....
  view full answer...


• Best Hitch for the 2018 Hyundai Tuscon Limited 1.6 T?
• Yes the Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" part # C12241 that you looked at is a confirmed fit for your 2018 Hyundai Tucson Limited and it offers a straightforward installation process. The hitch offers a 1 1/4" by 1 1/4" receiver tube opening. For better adaptability I strongly recommend the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" Item # 75836 this hitch has the 2" by 2" receiver tube opening and allows you to use a much wider...
  view full answer...


• Roof Rack Bike Rack Recommendation for 2012 Hyundai Tucson with Factory Crossbars
• For your 2012 Hyundai Tucson the Yakima FrontLoader part # Y02103 that you referenced is a confirmed fit (I checked with Yakima) and is a really great option that you'll be glad you went with. It secures the bike well by attaching to the front wheel which also allows you to not have to remove the wheel like other racks do. I attached a review video for this rack for you to check out as well.
  view full answer...


• Trailer Hitch Recommendation and Comparison for 2014 Hyundai Tucson
• For your 2014 Hyundai Tucson there are a few options for trailer hitches. I would go with the Draw Tite part # 75717 as it has the highest capacities and best price but I can explain the differences too. The Curt hitches part # C13120 and # C13066 are both a fit too but these are different capacities. If you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch...
  view full answer...


• Trailer Hitch and Bike Rack Recommendation for a 2017 Hyundai Tucson
• Yes, for a trailer hitch that is a confirmed fit for your 2017 Hyundai Tucson I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver part # 75836 which is a no drill option and it offers a hidden design which means only the receiver tube is show (see photo). I always recommend going with the 2" receiver tube opening because it does not limit the amount of bikes you can carry and it is compatible with a much greater variety of accessories. For a bike rack, I really like the Kuat Beta...
  view full answer...


• Suspension Enhancement For 2011 Hyundai Tuscon
• The suspension enhancement we offer for your 2011 Hyundai Tuscon is the SuperSprings Vehicle Suspension , part # CSS-1069R. These are designed to be inserted between the individual coils of each coil spring, and help level your Tuscon. These adjust progressively, meaning the more weight you load in your Tuscon, the stiffer they become. These are designed for the rear suspension.
  view full answer...


• Trailer Hitch and Wiring for a 2016 Hyundai Tucson
• Trailer wiring harnesses for your 2016 Hyundai Tucson, # C56348 and # 118501, both install the same way. They connect to the vehicle in 3 places: behind each of the tail lights and to the battery. The power wire has to be connected to the vehicle battery because no other 12 volt power source is appropriately rated for this application. I have included a link to our help article with tips on routing the power wire. If you do not already have a trailer hitch then you could use # C13240....
  view full answer...


• Rooftop Cargo Box Recommendation for 2019 Hyundai Tucson with OEM Roof Rack
• I do have a 16 cu ft roof box recommendation for your 2019 Hyundai Tucson with the OEM roof rack; the Yakima CBX Rooftop Cargo Box # Y66FR. This has first off been confirmed by Yakima to fit with your exact setup, but on the other hand it's a really great cargo box too. It not only compliments the body style of your vehicle but it also has top notch features like the removable torque tool used to install the mounting hardware. Since this tool is removeable you don't have knobs sticking...
  view full answer...


• Is There a 1-1/4" Hitch Available for a 2023 Hyundai Tucson for Bike Rack
• The only trailer hitch options available for a 2023 Hyundai Tucson are class III, with a 2" receiver like the etrailer Trailer Hitch Receiver part # e38KR which is what I recommend. That said, this is a much better option than the smaller class I or II, with a 1-1/4" receiver because it allows for a much greater selection of bike racks and other hitch mounted accessories like cargo carriers to choose from. In most cases, the bike rack will come with an adapter sleeve for use with a 2" receiver...
  view full answer...


• Parts Needed to Add Light Kit to Curt Cargo Carrier # C18151
• What I recommend for Curt cargo carrier # C18151 is light kit # 20174. To mount the lights you will also need 2 of bracket # BK70BB. You can use self-tapping screws to secure the brackets to the top, rear rail of the carrier. This set up is the most cost effective option. It would plug into a 4-way trailer wiring connector. Which if you didn't have that on your 2014 Hyundai Tucson you'd need the part # 118501 as well. I attached an install video for this kit for you to check out as well.
  view full answer...