bing tracking image

Filter Questions and Answers:

reset filter

Expert Answers about Geo


  • How Far Out Does the Ball Mount Need To Extend To Attach A Vehicle Mounted Tow Bar
  • In order to flat-tow a vehicle you'll need to use a tow bar which attaches the towed vehicle to the motorhome. If you are using a vehicle mounted tow bar like the Roadmaster StowMaster Tow Bar part # RM-501. The length of ball mount required will vary by application but you should not need any sort of extended version. That said, I don't have an exact length for you as it will again vary by application. I have attached a list of ball mounts below.
    view full answer...

  • Recommended Base Plates Compatible With Roadmaster Falcon Tow Bar for a 1995 Geo Tracker 4WD
  • The Roadmaster Classic Base Plate Kit - Fixed Arms # 118-1 or the Roadmaster XL Base Plate Kit - Removable Arms # 118-3 are confirmed to fit your 1995 Geo Tracker. Either will work with your Quick Disconnect Plate on your Roadmaster Falcon Tow Bar. With either base plate, you will need to buy the complete base plate to utilize your quick disconnect plate and your Falcon 5250 tow bar. Let me know if you'd like help with the wiring, supplemental brake system, or other components for your...
    view full answer...

  • 1996 Geo Metro 3-Door Hatchback Roof Rack Availability
  • For your 1996 Geo Metro the Sportrack roof rack part numbers # SR1003 and # SR1116 will complete a roof rack. The square bars of the kit will be compatible with your Yakima bike rack as well.
    view full answer...

  • Flat Towing Lighting Recommendation for a 1992 Geo Tracker
  • For lighting you can use the diode kit, # RM-15267, and not have to worry about cutting into the taillight housing. This will splice into your taillight wiring to allow your tow vehicle to control the taillight assemblies of the towed vehicle. This comes with a round 6-way connector that you will install on the front of your towed vehicle and enough coiled wire to go from there to the RV. I also attached a link to all of our help articles on flat towing lighting as well.
    view full answer...

  • Trailer Wiring Recommendation for a 1993 Geo Tracker
  • For your 1993 Geo Tracker the only trailer wiring harness I can recommend for you is a universal install harness like the part # 119178KIT that has been confirmed as a fit. The # C55372 that you referenced would not work for your vehicle.
    view full answer...

  • What is Needed to Attach a Tow Bar to a 1994 Geo Tracker
  • It sound like you need a base plate kit for your 1994 Geo Tracker in order to attach a tow bar for flat towing. If that is the case then the RoadMaster Base Plate to Blue Ox and Demco Tow Bars Adapter part # RM-033 will not work in this manner as it is designed to adapt a RoadMaster base plate to a Blue Ox or Demco tow bar. If you have such then the hardware that you need is included. Instead you are going to want to use the Blue Ox Base Plate Kit part # BX3503 if you have a Blue Ox tow...
    view full answer...

  • Tow Bar, Base Plates and Flat Towing Accessories for 1996 Geo Metro
  • To flat tow your 1996 Geo Metro, you'll need a towbar, base plates, safety cables, a method of wiring the vehicle so the taillights of the tow vehicle operate those of the Metro and a supplemental braking system. The Blue Ox Adventurer you referenced, part # BX7322 would work fine. For a base plate that bolts to the front of the vehicle frame and provides an attachment point for the tow bar, you could use the Blue Ox # BX3507 (as long as your vehicle isn't a GTI model.) For safety cables,...
    view full answer...

  • Recommended Adapter For Duncan Tow Bar And Complete Flat Tow System For 1999 Geo Tracker
  • For your Duncan Towmatic II Stowbar, The RoadMaster Base Plates to Duncan Towmatic II, Karbar and EazAligner Tow Bars Adapter # RM-038 will allow you to connect to the Roadmaster XL Base Plate Kit - Removable Arms # 1012-1 that are a fit for your 1999 Tracker. I recommend using Loctite Threadlocker # LT37420 for this install. I also recommend you use the RoadMaster 68" Single Hook, Coiled Safety Cables - 6,000 lbs # RM-643 for this application. For your tow bar wiring, I recommend the...
    view full answer...

  • Is a Base Plate Adapter Needed to Tow a 1997 Geo Tracker with a Roadmaster Sterling Tow Bar
  • Does you 1997 Geo Tracker have a Blue Ox Base Plate kit # BX3508 for a 2-door or part # BX3505 for a 4-door installed on it? If so, then to use a Roadmaster Sterling Tow Bar # RM-576 you will need to also use the # RM-031-5 that you referenced. Since the serial number of your tow bar is above 14,501 this adapter will fit.
    view full answer...

  • Tow Bar Wiring Kit Recommendation for 1996 GEO Tracker with Separate Turn Signals from Stoplights
  • For lighting you can use the diode kit, # RM-15267, and not have to worry about cutting into the taillight housing. This will splice into your taillight wiring to allow your tow vehicle to control the taillight assemblies of the towed vehicle. This comes with a round 6-way connector that you will install on the front of your towed vehicle and enough coiled wire to go from there to the RV. This kit can be installed on vehicles like yours that have the stoplights and turn signals on the...
    view full answer...

  • Availability of Roof Rack for 1994 Geo Tracker
  • You are correct that the SportRack # SR1002 does require a hard top roof. Your best bet is to go with a trailer hitch like the Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # 11128. Then you can use a lightweight trailer like the Yakima Rack and Roll Trailer # Y08106. I have included a video review of this roof rack on wheels for you to check out. To complete your towing package, you will want the following: Drawbar # 3593 Wiring kit # 119178KIT 1-7/8" hitch ball # 19256 2"...
    view full answer...

  • Mount Kit Recommendation for SnowBear WinterWolf Plow on 1992 Geo Tracker
  • The correct mount kit for your 1992 Geo Tracker to use your Snowbear Plow part # SB324-167 is the part # SB397-050 that you referenced. This kit is custom fit for your vehicle and is designed to work with the Winter Wolf as well.
    view full answer...

  • Does Roadmaster Base Plate Kit 118-8 Work with All Terrain Tow Bar RM-522
  • Yes the Roadmaster tow bar part # RM-522 does work with the base plate kit part # 118-8 that you referenced.
    view full answer...

  • Tow Bar Wiring to Flat Tow a 1990 Geo Tracker Behind a Motor Home
  • For lighting to flat tow your 1990 Geo Tracker, the easiest solution is to use a magnetic kit such as # RM-2120. There are no custom fit tow bar wiring harnesses for your 1990 Geo Tracker. I have included some links to help articles on tow bar wiring for you.
    view full answer...

  • Trailer Wiring Recommendation for 1989 Geo Tracker
  • For trailer wiring for your 1989 Geo Tracker we have universal kits like the part # 119178KIT which are a confirmed fit. This brand is the most reliable of the options available for your vehicle though.
    view full answer...

  • Most Durable Replacement Soft Top for a Geo Tracker
  • The most durable soft top we offer for a 1996 Geo Tracker is the Bestop Replace-A-Top part # B5136401. The Bestop Replace-A-Top has the heaviest fabric (23 oz) and offers the longest warranty period (2 years) of any other replacement top we offer for the Geo Tracker. The Bestop Replace-A-Top comes with the top, rear window, right quarter window, and left quarter window. I took a look at some of the one year later reviews for the Bestop Replace-A-Top and there was no mention of signs that...
    view full answer...

  • Availability of Replacement Top for 1993 Geo Tracker
  • I may have a solution for you, however the Bestop Duster Deck Cover # B9002915 referenced in your question is not confirmed to fit your 1993 Geo Tracker. It looks like there are enough differences between the 1993 and 1995 model Tracker that this particular cover is not compatible. For your 1993 Geo Tracker we do have the Bestop Strapless Bikini # B5257015 which is confirmed to fit and will work well. This will replace the factory-original top on the vehicle to provide a canopy over the...
    view full answer...

  • Base Plates, Tow Bar, and Accessories Needed to Flat Tow a 1993 Geo Tracker 4x4
  • Bascially, the Roadmaster Base Plates, # 118-1, will attach flat to the frame on the front of your 1993 Geo Tracker. We have not yet had the opportunity to install the base plates on a vehicle so we do not have pictures at this time. These base plates are what are called fixed brackets so they will always be visible on the vehicle. I recommend going with the XL style, # 118-3, which has removable arms, but otherwise install the same way. There are several other parts you will need to safely...
    view full answer...

  • Will an Enclosed Cargo Carrier Fit a 1991 Geo Tracker with Class I Trailer Hitch
  • I have a possible solution for you but the trailer hitches for the 1991 Geo Tracker are Class I trailer hitches. All of the enclosed cargo carriers including those from Rola will only fit in Class II and/or III hitches. What you can do is use a Class I rated regular cargo carrier such as # C18110 and then use a cargo bag such as # e98990. Then you could use Rightline cable lock # RL100640 to lock up the bag. It isn't exactly the same as a hardshell carrier but it will work!
    view full answer...

  • Parts Needed to Flat Tow a 1992 Geo Tracker 2-Door 4x4 Behind an RV
  • Yes, Roadmaster base plates # 118-3 will fit your 1992 Geo Tracker 2-door 4x4. For a compatible tow bar I recommend the Falcon 2 # RM-520. I have linked a video review of this tow bar for you. For safety cables I recommend # RM-643. The coiled design helps keep the cables off of the ground. For lighting you can use a simple kit such as # RM-2120. this kit bypasses the Tracker wiring so you won't have to splice into the tail light wiring. You may also need a high/low adapter to keep the...
    view full answer...