Thanks for the pictures! You don't need reverse lights based on them so the part numbers you'd want are driver's side (assuming you need the license plate bracket), use part # 30-92-003 and part # 30-92-001 for the passenger side. view full answer...
It looks like your 2016 Dutchmen Aerolite Travel Trailer uses 3500-lb axles, so we have an option for you.
We don't sell axles that meet the length specifications of your current axle, but you can instead use on of our Timbren Axle-less Suspension systems.
These replace suspension and eliminate the need for an axle since they mount directly to the frame. If you choose one of those, then you will need to know your hubs, bearing, races, and seals numbers to ensure compatibility.
A good... view full answer...
We had some previous 2012 Dutchman Voltage 3950 owners say they have a Lippert 1621 pin box on their toy hauler. I recommend verifying this information to be sure. Based on that and your GVWR of 19,000 lbs the Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Pin Box # GY66FR is what you need.
If you aren't sure how to identify your pin box, start by looking for a sticker on it with the pin box number. If the sticker is worn or missing, you may also be able to contact the manufacturer... view full answer...
The Castle Rock ST225/75R15 Radial Tire w/ 15" Liger Aluminum Wheel - 6 on 5-1/2 - LR D - Black # LH29FR that you referenced does not come with a center cap and lug nuts so you'd need the # LHCS108-SI60C for the center cap and then for lug nuts the part # LHLR103 for a stainless lug nut. Stainless lug nuts are great because they don't corrode which means they won't swell up and get difficult to fit a socket on. view full answer...
I'd recommend the next higher Strait Line part # RP66083 which has a tongue weight range of 400-800 lbs. Your dry tongue weight of 560 lbs is about at the top of the range of the # RP66082 which is 200-600. By the time your trailer would be loaded you'd be over the capacity and the system would be basically ineffective. Ideally you want the loaded tongue weight of the towing setup to fall right into the middle of the range of the system. Keep in mind that the weight of any cargo behind... view full answer...
The 2018 Coleman Lantern 286RK has a standard 4" x 4" rear bumper so I recommend the Curt RV Bumper 2" Trailer Hitch Receiver part # E-100. This would be the only bolt-on option or one like it since there aren't any pre-drilled holes in the frame to attach it that way. You may need to move the spare tire over to fit the trailer hitch if present. view full answer...
We have the Lippert Components Tandem Axle Lift Kit # RR23QX which will give your 2013 Dutchmen Denali and give you 2 inches of additional lift. view full answer...
We have numerous tire and wheel combos in size ST205/75-14. I have included a link to the options for you. We have this size available in load range C, and D depending on the capacity you need.
For load range C we have # TTWA14RWS rated for 1,760 pounds at 50 psi. This one features a white spoke powder coated steel wheel. I don't know how much the style matters since you are looking for a spare.
And for a load range D we have # AM32161 which again features the white spoke steel wheel.... view full answer...
The Atwood Air Command Rooftop RV Air Conditioner w/ Heat Pump # AT15033-22 will match up to the duct work on your 2014 Kodiak camper. You will need to use the thermostat that comes with this kit though. You won't be able to reuse the thermostat you have. view full answer...
The Stromberg Carlson Electric Trailer Jack part # JET-3755 is an excellent option for a 2008 Dutchmen Tab Travel Trailer. It will be a direct bolt-on replacement with plenty of capacity to lift and lower the trailer. I really like the Stromberg Carlson trailer jack because it has a built-in bubble level in the head which helps with leveling the trailer and the drop-leg feature again just makes things much faster. view full answer...
Thank you for those details, they were definitely helpful, and we can get you set up with the best option for a weight distribution hitch with sway control for your 2021 Coleman 3215BH Light Travel Trailer. This is a pretty long trailer at nearly 37 feet, so it's really important to get a hitch that is going to give you the most control over your sway, and for that I highly recommend going with the Blue Ox SwayPro, with the right fit for your Coleman trailer being the following:
- Blue... view full answer...
The lower plate of the Trailair pin box is not replaceable but if you were in a situation where it would need to be replaced you'd need to replace the entire pin box. There isn't an exact figure or dimension that gets checked to know if the lower plate is bad or damaged but you'd just have to look at it and look for signs of wear or damage to the king pin and plate. view full answer...
The Steele seal part # SR26ZR does have two lips and is quite a bit different from the P-shaped wiper blade part # SR76FR which is white and had ridges instead of two lips. view full answer...
The Replacement Printed Circuit Board for MaxxAir Powered Lift RV Roof Vents # MA10A21275K is the correct model for your 4700K vent as we have confirmed this with our contacts at MaxxAir. view full answer...
If the jack you have on your 2014 Coleman 262BH is a Ram jack like the part # EJ-3520-WBX you referenced the correct replacement manual handle would be the part # EJ-3520-HD. view full answer...
Yes, a 2016 Chevrolet Silverado 2500 can safely handle pulling a 5th wheel trailer with those ratings.
The correct 5th wheel hitch will depend on the length of your truck bed.
6-1/2' bed: B&W Patriot 5th Wheel Trailer Hitch w/ Slider # BWRVK3270 (the slider will provide the turning clearance you will need for your short bed truck)
8' bed: B&W Patriot 5th Wheel Trailer Hitch # BWRVK3255
Both of these hitch options will install using the B&W Universal Base Rails and Installation Kit #... view full answer...
Yes, this is possible. You will just need to measure the distance between the frame on your 2021 Coleman Lantern 17B.
The Adjustable Width Trailer Hitch Receiver # C13702 fits frame widths between 18" and 51". The Adjustable Width Trailer Hitch Receiver # 13703 fits frame widths between 22" and 72". Either option can be bolted or welded on and will provide you with enough weight capacity to carry your 200 lb. grill in a cargo carrier.
I am not sure what the size of your grill is, but... view full answer...
Your 2019 Dutchmen Coleman Lantern LT Travel Trailer was pre-wired for a Furrion observation camera system like the part # FOS43TASF that you referenced. If you go with the 5 inch display version part # FOS05TASF you can have side cameras added with the Furrion Vision S Side Camera w/ Marker Light Bracket # FCE48TASL so this would be what I recommend. view full answer...