It sounds like you are looking for Replacement Hardware Kit For Trailer Hitches # RHK. All you will need to do is enter the hitch item number of your trailer hitch receiver and select the manufacturer from the drop down menu.
If you have a factory trailer hitch receiver you will need to contact your local Toyota dealer to the replacement bolts. view full answer...
The CR Brophy 1-1/4 inch to 2 inch hitch adapter, part # HTAD would be compatible with the Draw-Tite # 24913 Class I hitch that you're interested in. Although not typically stated in the instructions for their current bike racks, Thule typically doesn't recommend using hitch adapters. Since you'll be just below 100 lbs, you should be fine, but the best practice is always to use the correct accessory in the correct receiver size. Using the adapter will move the bike rack about 7 inches rearward,... view full answer...
The receiver opening of the Curt # C11265 and Draw-Tite # 24913 are both square openings. They're both a 1-1/4 inch Class I trailer hitch receivers that will fit your 2014 Toyota Corolla. I've attached install videos of both of them for you.
With either hitch you will need to use a bike rack that will fit a Class I hitch receiver. Even though Class II accessories still fit a 1-1/4 inch hitch receiver it doesn't mean it will fit a 1-1/4 inch Class I hitch. I've linked an article that... view full answer...
To use your Roadmaster StowMaster Tow Bar # RM-501 (StowMaster 5000) on your 2004 Toyota Corolla, you will need to use the Roadmaster Crossbar-Style Base Plate Kit # 1165-1. This base plate kit is confirmed to fit your Corolla and is compatible with the StowMaster tow bar. We also have the replacement linch pins # RM-910024. I have also listed out other parts needed for flat towing your Corolla below:
Safety Cables
- RoadMaster 68" Single Hook, Coiled Safety Cables # RM-643
Tow Bar Wiring
-... view full answer...
I took a look at the online owner's manual for your 2018 Toyota Corolla and it simply states that Toyota "does not recommend" towing a trailer so they do not give any type of towing capacity. The only thing they state is that a load from a trailer needs to be factored into the cargo capacity. On page 163 of the online manual they explain how to determine the cargo capacity, so you will need to refer to this in order to determine your Corolla's capacity (the manual does not give specific... view full answer...
After doing a bit of research on the internet, I was able to find that the Fram filter, PH3950, will work on the 20 x 1.5 mm threaded adapter included with the thermostatic adapter, part # D25732. This filter has a 2.80 inch outside diameter gasket that will work with the thermostatic adapters.
This filter has a larger overall outside diameter, 3.66 inches, than your 4 wheeler OEM filter too and you will need to check to be sure that the Oil filter will fit in the location with the sandwich... view full answer...
When it comes to installing a trailer hitch on your 2012 Toyota Corolla The Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4 inch is confirmed to fit your L base model.
The trailer hitch has a bolt-on installation with no welding required and has a gloss black powder coat finish that is over a protective base coat that offers superior rust resistance. The hitch has a maxim gross trailer weight up to 2,000 pounds and has a maximum tongue weight up to 200 pounds. I recommend checking... view full answer...
We have just what you need for your 2018 Toyota Corolla! I recommend checking out the Yakima JetStream Crossbars # Y00425 with the BaseLine Towers for Yakima Crossbars # Y28TR, & the BaseClip Fit Kit for Yakima BaseLine Roof Rack # Y06130 & # Y06170.
These crossbars will easily attach to your Corolla's naked roof, has a 165-lbs weight capacity, and will allow you to use a set of J-Style kayak carriers like the Thule Compass Kayak Roof Rack w/ Tie-Downs # TH890000.
Since you're interested... view full answer...
It sounds like you have a Yakima HullRaiser J-Style Roof Mounted Kayak Carrier Y04039. To be able to mount this kayak carrier on a roof rack with factory or aero crossbars, like the Rhino-Rack Vortex Aero, you will want to use 2 of the HullRaiser to HullRaiser Aero Conversion Kit # Y8860031. You will want a conversion kit for each J-style carrier.
There is not a MightyMount to convert the HullRaiser to fit aero crossbars. view full answer...
The Swagman Rooftop Bike Rack, # S64720, mounts to crossbars that run side to side on a vehicles roof. As long as your 2011 Toyota Corolla has a roof rack with crossbars that run side to side, then you will not need any additional items to mount the bike rack.
I am not aware of a factory roof rack option for the Toyota Corolla, so if you need a roof rack, then I would recommend going with the Rhino-Rack RS 2500 Roof Rack, # RRRS232. This roof rack uses elliptical crossbars that are more... view full answer...
We have the perfect replacement hardware for your 1998 Toyota Corolla!
The Replacement Hardware # RHK is what you will need. When you get to the product page there will be a box that you will have to fill out before you add it to the cart. You will need to type in C11181 then add it to the cart. This will give you all the replacement hardware that you will need to install it on your 1998 Toyota Corolla.
I attached a review video link below. view full answer...
Trailer brake controllers such as the Tekonsha Prodigy P2 # 90885 are for use with trailers that have either electric or electric-over-hydraulic brakes but they are not suitable for use when flat-towing a vehicle. The presence of the trailer brake controller in your RV does not affect flat towing.
Flat towing a car behind an RV requires several components: tow bar, safety cables, base plates and wiring/lighting for the towed car and a supplementary braking system like your Brake Buddy... view full answer...
Honestly, the least expensive way to deal with this issue woluld be to get a new cargo carrier that has an angled shank like the Curt # C18110 which has a shank that provides a 3-3/4 inch rise.
The only other option available is an adapter like # HT5R used along with a reducer like # HT02. This is a solution, but not a great one because using the adapter would reduce your hitch tongue weight capacity by half to 100 lbs. That means that the weight of your existing cargo carrier and whatever... view full answer...
For your 2008 Toyota Yaris, you're going to need to first add a set of crossbars if you do not have a set you are going to need to add them with the Yakima JetStream Crossbars # Y00425 with the BaseLine Towers for Yakima Crossbars # Y28TR, and the BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06118.
For a kayak carrier the Rhino-Rack Kayak Roof Rack w/ Tie-Downs - J-Style # S512 you were looking at will work just fine. view full answer...
You've come to the right place; I recommend using the Rhino Rack # RV0586B which gives you a great, high quality and durable rack that is comparable to the big name manufacturers at a more pocketbook friendly price. This rack will work on the naked roof of your 2017 Toyota Corolla to provide you with 36" of crossbar space and an aerodynamic bar system that will reduce wind noise that can be prominent with other bar systems. The Rhino Rack # RV0586B allows you to use clamp on accessories... view full answer...
For a roof rack on your 1999 Toyota Corolla I recommend the Inno roof rack consisting of:
Inno Aero Crossbars - Aluminum - Black - 39" Long # INXB100-2
Inno Flush Feet f# INXS200
Custom Fit Kit # INK134
These parts are easy to remove and install after initial installation and should not cause any damage to the car when properly installed using the manufacturers instructions.
Once you have the roof rack installed, you can use a roof cargo box to carry your luggage. I recommend the Thule... view full answer...
For your Demco Kar Kaddy SS Tow Dolly # DM9713045 towing your 2018 Toyota Corolla using P225/45R17 tires, you're going to want to use the:
-Replacement 3-Point Standard Wheel Tie-Down Strap for Demco Tow Dollies # DM03528.
Attached are a couple of product videos for you to check out as well. view full answer...
I looked up the owner's manual to your 2019 Toyota Corolla and it states that the vehicle is not designed to tow and that Toyota doesn't recommend towing with it. With such a new vehicle I recommend checking your own manual or with Toyota to see if they can provide a tow rating.
If you find you can tow with the Corolla we do have hitches available. I recommend the Curt, part # C11265, because it is tucked under the bumper by about an extra 1/2 inch compared to the Draw-Tite. Since your... view full answer...
In order to flat-tow a vehicle behind a motor home a number of components are required: base plates, tow bar, safety cables, wiring/lighting and a supplemental braking system. I have linked an article that covers each of these items and review the various different types and options available.
A first step is to confirm in your two owners manuals that your motor home can safely tow the weight of your Corolla and that your Corolla can be flat-towed. Certain autos will require modifications... view full answer...
When installing The Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4 inch # C11265 you will not have to remove the rear air dam it only has three installation steps. If present, remove existing bolts from tow loops. Then you would raise the hitch into position and align the holes in the side plates, secure the hitch with the hardware provided. Finally you torque down all hardware.
I will attach an installation video below. view full answer...
Go To Results