Mounts Needed for Yakima HullRaiser Kayak Carrier on Rhino-Rack Vortex Aero Crossbars

Question

Question:

What Yakima Mighty Mount model # is needed to attach a Yakima Kayak post-style, fishhook mount system around the Rhino-Rack Vortex Aero Crossbars ? Trying to use parts from a previous car set up if possble.

asked by: Carl

0

Expert Reply:

It sounds like you have a Yakima HullRaiser J-Style Roof Mounted Kayak Carrier Y04039. To be able to mount this kayak carrier on a roof rack with factory or aero crossbars, like the Rhino-Rack Vortex Aero, you will want to use 2 of the HullRaiser to HullRaiser Aero Conversion Kit # Y8860031. You will want a conversion kit for each J-style carrier.

There is not a MightyMount to convert the HullRaiser to fit aero crossbars.

expert reply by: Victoria B

0

Answer 1

I have good news, more good news, and a third bit of good news! The Yakima HullRaiser conversion kit #Y8860031 will work with the Rhino-Rack aero roof rack bars. It will also work with the Thule Xsporter bars based on other tests we have done with…

view full answer...

Answer 2

Hi Alec, The Inno Kayak Roof Rack w/ Tie-Downs #INA452 needs a 28" minimum spread so that the saddles sit at the right spot for the kayak and support the weight properly. This is probably just a general guide from Inno though because the length…

view full answer...

Answer 3

I recommend the RetraxPRO XR Hard Tonneau Cover #RTT-80485 and Yakima OverHaul HD Adjustable Truck Bed Ladder Rack #Y01151-5955 as the best combination for your 2024 GMC Sierra 3500 long bed. The ladder rack will mount to the t-slot channels in the…

view full answer...

Answer 4

Yes, it does! The PowertraxPRO XR Hard Tonneau Cover item #RTX84QR is confirmed to fit the 2024 GMC Sierra 3500 with a 6-3/4' bed. The slots built into the cover are compatible with Yakima ladder racks like the OverHaul HD Adjustable Truck Bed…

view full answer...

Answer 5

Furrion had to come up with an adapter for their Vision S systems like the part #FOS07TASF with the part #FR87PR which fixes the problem that your truck has with this camera setup.

view full answer...

Answer 6

Hey Alec, For your 2016 Ford Fusion I recommend the recommend a roof rack from Inno: Inno Aero Crossbars #INXB138-145 Inno Through Feet for Aero Crossbars #INXS250 Custom Fit Kit for Inno XS200, XS250, and INSU-K5 Roof Rack Feet #INK860 As with any…

view full answer...

Answer 7

I attached a picture that has shows the installation instructions for the Yakima HullRaiser to HullRaiser Aero Conversion Kit #Y8860031. This will show you how to convert your Hullraiser to work on Aero bars. You'll also need the part #Y8890057…

view full answer...

Answer 8

I checked with Yakima and to mount your existing JayHook Kayak Carrier to the aero-style crossbars on your Subaru Outback you just need the HullRaiser Conversion Kit #Y8860031 and Plug Kit #Y8890058. This will replace the original mounting hardware…

view full answer...

Answer 9

To add a Yakima roof rack to your 2024 Kia Telluride, you will need the following parts: Yakima SightLine FX Roof Rack for Flush Side Rails - Aero Crossbars - Black - Qty 2 item #Y73UV SightClip Fit Kit for Yakima SightLine and RidgeLine Roof Rack…

view full answer...

Answer 10

I attached a picture that has shows the installation instructions for the Yakima HullRaiser to HullRaiser Aero Conversion Kit #Y8860031. This will show you how to convert your Hullraiser to work on Aero bars.

view full answer...

Answer 11

The Yakima HullRaiser to HullRaiser Aero Conversion Kit, Y8860031, is a Yakima product. The conversion will fit virtually all base rack cross bars, including factory cross bars. If you do not have crossbars going across your vehicle from driver side…

view full answer...

Mounts Needed for Yakima HullRaiser Kayak Carrier on Rhino-Rack Vortex Aero Crossbars

Product Page this Question was Asked From

Continue Researching