The Pop & Lock # PAL5400 is compatible with your truck. The locking handle does NOT include keys, because you would use the ignition key to code the lock. After the key is coded to the lock, it'll open the tailgate with your ignition key.
If you click the provided link, you can see a product description video. view full answer...
The Pop and Lock Custom Tailgate Handle with Lock - Codes to Ignition Key - Manual - Magnetic Grey # PAL5409 will have the same basic construction as the part # PAL5400 as the only real difference is that one keys to the ignition while the other uses a unique key that doesn't key to the ignition. When I read the reviews we have on part 5400 I found people saying that they felt the construction was weaker than the OEM handle, but I wasn't able to find any saying the the lock actually broke;... view full answer...
The Replacement Double T-Slot Cross Bar # TA8523447003 comes with just the bar. If you need end caps for these bars you can use the Replacement End Caps # TA01-27023. I've also listed some potential hardware replacement options for a TracRac TracONE system like the # TH27000XTB-XK4B for you below as well:
Replacement Fastener Kit for TracRac TracOne Ladder Racks # TA01-27016
Replacement Load Stops for Thule Aeroblade Load Bars, Ladder Rack, Thule TracRac CapRac # 753-3761
Replacement M6-1x14mm... view full answer...
The wiring of the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit # RM-15267 does come with four wires for the tail lights and turn signals.
However, it comes with a vehicle-side 6-way (which you will connect to the 7-wire to 6-wire cord) that you can wire as needed with 10 gauge wire # 10-1-1.
I have added links below to a couple video installs as well for you to check out of this harness. They are on different vehicles than your 1998 Tacoma but are examples of the install... view full answer...
What you are seeing on the lid of TorkLift PowerArmor Locking Battery Box # TLA7708R are not holes. They are like plugs/rivets so if you wanted to install a solar panel, # TLA7713, you would have to pop them out first. I have included a link to the installation instructions for you. view full answer...
Snow chains should only be required on the tires on the main drive axle of your vehicle, check with the state of Colorado to be sure. We have an informational article that has some general state by state information for you to review. In your case you would need to order 1 set of two snow chains like the Pewag # PWE3227SC chains featuring cam tightners and all steel square links that provide superior traction.
If you want to install chains on all 4 tires, because you have a 4 wheel drive... view full answer...
You are correct. The price you see on the product page for the WeatherTech floor liners # WT444521 is for a front pair, driver and passenger side. These will fit your 2014 Toyota Tacoma if it is an Access cab or regular cab. I have also included a link to all of the floor mat options we carry for your truck. view full answer...
Westin Sportsman Grille Guard with Winch Plate # 40-93885 includes the grille guard, winch tray, and the appropriate brackets and hardware to install it on a 2016 to 2018 Toyota Tacoma. I have linked the instructions which includes a parts breakdown.
I am sure you could attach a light bar. There won't be room at the winch tray if there is a winch installed but the lower, center bar or upper center bar on the grille guard parts could work for mounting a light bar. view full answer...
Replacement Sliding Clamp Assembly for Extang eMAX Soft Tonneau Cover # EX1104 comes with both clamps, not just one. I attached a demonstration video which goes over this clamp and shows how two are included. view full answer...
The top part with the hook on the Spare Tire Rack for Enclosed Trailers, # RA-16, is not available as a separate part. A lot of customers who purchase this carrier also add some additional e-track like # E19146, perhaps for exactly the same reason. view full answer...
The Erickson Big Bed Junior Hitch Mounted Load Extender, # EM07605, does not comes with the straps you see in the pictures. If you look at some of the pictures of just the extender, you will see two loops, one on each end, of the T part of the extender. You could run safety cables, rope, or hooks through these to help secure the cargo. The other straps are attached in the adjustments holes for the cross bar. You could also wrap a strap around each side of the cross bar to stabilize the... view full answer...
The Electric Trailer Brake Kit # AKEBRK-35-SA includes the left and right side brake assemblies. It will not include any bearings or hubs. For the hub you will need two like the Trailer Hub and Drum Assembly # AKHD-545-35-EZ-K. This is a hub/drum which includes the common size bearings and grease seal used on a 3,500lb axle. This uses a Inner Bearing # L68149 (1.378" ID), Outer Bearing # L44649 (1.063" ID) and Grease Seal # 58846 (1.719" ID).
Please let me know if your trailer spindle... view full answer...
The replacement Rain gutter tower # Y8810137 does not include the knob and screw. Yakima only makes them available in the hardware bag, # Y8810136, and not individually. The good news though is that with the hardware bag you will have some spare parts should you need them. view full answer...
Yes, the center pin on trailer side wiring harness # H20046 is for reverse lights on the trailer. For this particular harness it is the yellow wire. But it will only work if the center pin is functional on your 2012 Toyota Tacoma. If you have the factory installed 7-Way on the Tacoma then it should be active. view full answer...
Yes, you can purchase just the Rhino-Rack legs and the crossbars without the tracks. For the legs, you need 2 sets of the Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC and RT Roof Rack Tracks # RRRLT600H. For the black 54" Rhino-Rack crossbars, you need the Rhino-Rack Vortex Aero Crossbars # RRVA137B-2.
The Rhino-Rack legs will fit onto Thule tracks on your Leer camper shell. view full answer...
Yes, all of the necessary hardware to install the Draw-Tite Max-Frame Trailer Hitch Receiver # 75236 to your 2009 Toyota Tacoma will be included.
I have attached an installation video of this hitch being installed on a 2008 Tacoma that you can use as a reference. view full answer...
I reached out to my contact at Tekonsha regarding the OEM Replacement Vehicle Wiring Harness # 22117. He said the kit was recently changed to include the 10 amp fuse to use if necessary on certain vehicles. You do not need to use the fuse and for the majority of applications it simply serves as an extra part.
I have included the complete written installation instructions that you can check out as well. view full answer...
I have the covers you need! However, for your sport bucket seats on your 2010 Toyota Tacoma, I confirmed that the Covercraft SeatSaver Custom Seat Covers - Front - Gray # SS2403PCGY is for standard bucket seats and will not fit sport models. This kit comes with a pair of seat covers (quantity of 2).
Since you say you have sport bucket seats, that requires a different cover model. This is because the sport seats have a recessed adjustable headrest and no forward-fold passenger seat. I... view full answer...
The Dutton-Lainson 6 inch replacement wheel part # DL22440 comes with a 3/8 diameter bolt and nut. This wheel is intended to ride on the shoulder portion of the bolt, therefore no sleeve is included. This product is designed for Dutton-Lainson jacks up to 1,000 pounds capacity.
I have included a picture that shows the hardware included. view full answer...