The weight distribution shank and weight distribution head are included with the Reese Steadi-Flex, part # RP66558, that you selected. The only item you will need to complete the installation is a properly sized hitch ball to match the coupler on your trailer.
If your trailer has a 2-5/16 inch coupler you will need the Hitch Ball with 2-5/16 inch ball, like part # 63847. If your trailer has a 2 inch coupler you will need the Hitch Ball with 2 inch ball, like part # 63845.
If you have... view full answer...
Yes, the Equal-i-zer Weight Distribution System # EQ37100ET does come with a 2-5/16" hitch ball. It is recommended to use a 1-7/8" thin-walled socket like part # EQ70-00-4800 to install the hitch ball due to the lack of clearance on the head unit. view full answer...
The Equal-i-zer Weight Distribution System # EQ64FR does not come with a hitch ball attached. This is due to the manufacturer not installing the hitch ball from the factory. We pair their hitch with the Ball # EQ54FR as a package to ensure the correct size hitch ball goes with the correct weight distribution hitch ball. You will need the 1-7/8" 12pt Thin Walled Socket # ALL643216 to install the hitch ball on the hitch head. It is also needed to verify and check torque while you use the... view full answer...
You are correct that the Curt TruTrack 2P Weight Distribution System w/ Sway Control # C69JR comes with a 2-5/16" hitch ball but it is not pre-installed. This is something directly from Curt and while we aren't able to pre-torque hitch balls for weight distribution systems prior to shipping them out, you should be able to rent one from your local auto parts store or have a local shop install the hitch ball for you.
For a similar system that does come with the hitch ball pre-installed I... view full answer...
I can see how either way would "in theory" work well, but what we've gotten from our weight distribution manufacturers is that you let it auto level first and then set the system up so that the WD's spring bar tension is accurate for how the vehicle's suspension configuration and not be too severe.
Otherwise if you do the auto-level after the WD system you may end up with the WD and the air system working against each other. view full answer...
The Equal-i-zer Weight Distribution System # EQ37140ET that you referenced does come with a shank and a 2-5/16" hitch ball so you will not have to purchase anything else for your towing setup. The only other thing that you may want to get is a 1-7/8" thin walled socket like part # EQ70-00-4800 to help make installing the hitch ball easier.
You will want to make sure that the Total Tongue Weight (TTW) of your towing setup fall in the middle of the Tongue Weight (TW) range of this Weight... view full answer...
The Husky Center Line Weight Distribution w/ Sway Control - Trunnion - 8,000 lbs GTW, 800 lbs TW # HT32217 you asked about is not available with the 2 inch hitch ball included. You will need to simply get the 2" Hitch Ball for Husky Center Line Weight Distribution Systems - 8,000 lbs # HT33853 and swap it out for compatibility with your coupler. I recommend using the socket # ALL643216 for this swap. view full answer...
The Equal-i-zer Weight Distribution System # EQ37120ET is a kit made up of the Equal-i-zer part numbers 90-00-1200 (Equalizer Wt Dist w Sway Cont - 12K GTW, 1,200 TW) and 91-00-6120 (2-5/16" Hitch Ball # EQ91-00-6120).
The 92-00-1200 is the Fastway e2 Weight Distribution # FA92-00-1200. Fastway is a part of the Equal-i-zer family. view full answer...
Actually the Strait-Line Weight Distribution # RP66130 does not come with a shank so if you needed one for a 2-1/2 inch hitch you would want the part # RP54977, or if you have a 2 inch hitch you would want the part # RP54970 instead.
I attached a review video and installation instruction links to the right for you to check out plus an FAQ on weight distributions systems. view full answer...
The Blue Ox 2-Point Weight Distribution # BLU45FR will come with a 2" hitch ball pre-installed on the hitch head.
A 2-5/16" Hitch Ball # C40030 can be used if your trailer has a 2-5/16" coupler. view full answer...
The spacers that come with the Pro Series Weight Distribution System # PS49582 and # 83660 that you referenced are designed adjust the angle of the hitch ball so that you get the correct amount of spring tension to properly distribute the weight of the trailer tongue weight.
Check out the install video I attached for this WD system as well. At the 1:00 mark the spacers are shown. view full answer...
The replacement Pro Series weight distribution head # PS58442 does come with the hitch ball, sway control ball, and all necessary mounting hardware.Basically everything you see in the pictures.
This head is a replacement for Pro Series weight distribution systems # PS49583, # PS49582, and # PS49901. view full answer...
Yes, the Curt Weight Distribution System, # C17322, comes with everything you will need including the shank and a ball. I have included a link to the installation instructions for you.
You will want to make sure that this is the best system for your needs. Weight distribution systems should be selected based on the tongue weight of the trailer plus the weight of anything loaded behind the rear axle of the towing vehicle.
This system has a tongue weight capacity range of 800 to 1,000... view full answer...
The shank that comes with the Fastway e2 Weight Distribution w/ 2-Point Sway Control - Trunnion - 6,000 lbs GTW, 600 lbs TW # FA92-00-0600 is indeed the 4100; it is the following part number:
- Fastway e2 Weight Distribution Shank - 12" Long - 6-1/2" Rise, 4" Drop - 1,200 lbs TW # FA92-02-4100 view full answer...
The Equal-i-zer Weight Distribution System # EQ64FR that we sell will come with the Equal-i-zer part numbers 90-00-1600(hitch) and 91-00-6160(ball). We have combined them to ensure that the correct weight ball is always used to match the hitch capacity.
A 1-7/8" 12pt Thin Walled Socket # ALL643216 is needed to install the 2-5/16" hitch ball that comes with the Equal-i-zer hitch system. view full answer...
We do have a weld on tab to use with the Reese Friction Sway Bar # 83660, but it isn't included with it.
You will want the Draw-Tite # 3442 it measures 4-7/8 inches long x 1-15/16 inches wide x 7/16 inches deep with a 5/8 inch hole.
I have linked it to this page for your convenience. view full answer...
The Blue Ox SwayPro Weight Distribution w/ Sway Control - Clamp On - 20,000 lbs GTW, 2,000 lbs TW # BXW2000 comes with brackets that fit a 3-6" frame height. Unfortunately, there is no way to trade these out. The Clamp-On Lift Brackets for Blue Ox SwayPro Weight Distribution Systems - 8" Frames # BLU98FR must be purchased separately. These brackets will allow you to use the # BXW2000 with your 8" trailer frame. view full answer...
The Curt Trunnion Style Weight Distribution System part # C24UR does come with the pictured shank. The only thing it does not come with that you will need is a hitch ball, part # 19286 for 2-5/16". view full answer...