Both the Yates Keel Roller for Boat Trailers - TPR - 10" Long - 5/8" Shaft Item # YR1000Y and the Yates Keel Roller for Boat Trailers - TPR - 10" Long - 5/8" Shaft - Blue Item # YR1000B are replacement rollers. Each roller is a different size so depending on what bracket you have currently. So these rollers do not come with the brackets. These are both designed for a 10" wide bracket with 5/8" diameter shaft. Here's a bracket that it will fit # CE10304G but we do not carry a 10" wide roller.
If... view full answer...
The Curt Class II hitch, part # C12027 doesn't include the ball mount, hitch pin and trailer ball. Those are sold separately. In order to tow with your hitch, you'll also need a trailer wiring harness.
For a wiring harness, I'd recommend # C56175. For a ball mount, use # C45520 along with # PC2 for a hitch pin and # 19256 for a 1-7/8 or # 19258 for a 2 inch trailer ball.
I've linked to a video showing a typical installation of the wiring harness I recommended. view full answer...
Yes, the DeeZee Rough Step Running Boards w/ Custom Installation Kit # DZ15300S-15316 comes in a set of 2. The DeeZee Running Boards will fit your 2021 Chevy Express Van with 135-inch and 155-inch wheelbases. view full answer...
Each of the bolts for the Draw-Tite Trailer Hitch # 36408 that fits your 2007 Chevy Equinox are M12 hex bolts.
I strongly recommend using the Replacement Hardware Kit for Trailer Hitches # RHK to get the correct hardware for this hitch.
All you need to do is go to this product page, enter the model number of your hitch in the box that says "Hitch Item Number" and then select the correct manufacturer from the drop-down box. So you'll simply enter "36408" in the "Hitch Item Number" box... view full answer...
The Curt Double Lock, Flip and Store Underbed Gooseneck Hitch w/ Installation Kit - 30,000 lbs # C60712 is a fit for your 2001 Chevy Silverado 3500 Dually. You don't absolutely need anything else. Just the included instructions and the kit will get you down the road. I recommend getting some paint to match your truck bed to finish the edges of the 4 inch hole you will cut, but besides that you are all set. You just need basic tools, a torque wrench, and a drill with hole saw bit. I've... view full answer...
Yes the Curt A20 5th Wheel Trailer Hitch for Chevy/GMC Towing Prep Package part # C84FR has everything you will need to install it into your 2020 Cherolet Silverado 3500 with the prep package. It is a very reliable easy to use fifth wheel hitch you will be happy with for a long time.
You may also want in bed wiring like the Hopkins Endurance 5th Wheel/Gooseneck 90-Degree Wiring Harness with 7-Pole Plug part # 41157 This will give you a 7-Way connector in the bed of your Silverado so you... view full answer...
The Curt Class I Hitch # C11527 is not a fit for your 2014 Chevrolet Trax. The # C11527 only fits the 2015-2021 of the Chevrolet Trax.
We do not have a hitch to fit your 2014. We do have trunk mounted bike racks or roof racks if you are interested. view full answer...
Tekonsha's Prodigy P2 Trailer Brake Controller # 90885 comes with a universal wiring harness for hardwired installations. But if your truck has a factory-installed 7-way trailer socket at the rear bumper then you can use wiring adapter # 3015-P for easy plug-n-play installation.
If you do not have a factory 7-way then you'll also need Hopkins part # HM40975 to complete your installation.
The linked video will help illustrate the install process. view full answer...
The Timbren Rear Suspension Enhancement System part # TGMRCK15S which is a fit for a 2014 Chevrolet Silverado 1500 comes with both replacement jounce springs so you will only need to order one kit. The Timbrens are going to be an excellent option to reduce sag while towing or hauling a heavy load.
In regards to needing spacers, this will not be an issue as a leveling kit only affects the front suspension, not the rear so you will be good to go with the above. view full answer...
Yes, the Curt Custom Fifth Wheel Installation Kit # C16418-204 will include the lower mounting brackets and in bed 5th wheel rails. You do also get all the hardware needed to bolt the mounting brackets to the frame as well as the rails to the mounting brackets.
I have linked an installation video below for this installed on a 2006 Chevrolet Silverado 2500HD like yours. view full answer...
The replacement Pro Series weight distribution head # PS58442 does come with the hitch ball, sway control ball, and all necessary mounting hardware.Basically everything you see in the pictures.
This head is a replacement for Pro Series weight distribution systems # PS49583, # PS49582, and # PS49901. view full answer...
The UWS Rod-Connector # UWSRODCONNECTOR that you referenced is sold individually. If you needed two you'd need to select a quantity of 2. view full answer...
All of the hitches sold on our website come with the necessary hardware to install the hitch on its respective vehicle, but do not include the tools. If you should decide you need to purchase a bolt leader for the installation of the Draw-Tite Class II Trailer Hitch Receiver, item # 36407, you will need the 1/2 inch Bolt Leader, part # 80101-1.
The T-One Wiring Harness for your 2007 Chevy Impala is sold separately from the hitch, and it is the T-One Vehicle Wiring Harness, item # 118417.... view full answer...
The CIPA Deluxe Door Mount Mirror # 11650 is a universal-fit door-mount towing mirror that is intended to fit a broad range of vehicles. It attaches at the bottom of the door and also in between the top of the door and the window and fits both driver- and passenger-side doors. Please note that if your Colorado doors have a plastic body molding (sometimes called cladding) at the bottom of the door then this mirror will not fit.
This CIPA mirror is sold as a single unit, not a set, so you... view full answer...
The Perimeter Rail Kit for Yakima LockNLoad Platform Racks # Y62AV includes all 4 rails for your platform. It has 2 side rails and 2 front/rear rails along with the hardware for installation. This will fit your 76" long x 54" wide LockNLoad platform. view full answer...
MagnaFlow exhaust revolves around the idea of increased flow through the system so things like baffles, chambers, louvers, and flapper valves are eliminated. This allows the system to achieve its tone as well.
I know a lot of people like to disable the displacement on demand or active fuel management systems that cut the motor to 4 cylinders when it chooses it is appropriate. If this is something you are interested in then the way to achieve it is to use a programmer that will allow you... view full answer...
Erickson ladder rack # EM07708 is a complete system that includes 2 sections for one side of the truck bed. It is available in black steel. view full answer...
The K-Source Universal Towing Mirror # KS3891 referenced in your question is confirmed to fit your 2014 Chevy Silverado 1500. This product includes one mirror that can be used on either the driver or passenger side. If you are wanting to install the mirror on both sides of your truck, you will just want to order two.
This is a great, extra-large towing mirror that will give you an expanded view of the road and your trailer. It features a ratcheting system that will securely tighten the... view full answer...
Yes, the TruXedo Elevate Truck Bed Rack System # TX46NV that you referenced is the TS rails plus the ladder rack system that is adjustable in height. view full answer...