Yes, you can use the Solenoid Valve for Titan Brake Actuators with Reverse Lockouts part # T4748800 on the Dexter DX7.5 Drop-N-Go Brake Actuator part # 099-175-00 to add an electric lockout feature. view full answer...
The correct cover that you have for your 2012 Chevrolet Silverado (6-1/2 ft. bed without cargo management system) is the TruXedo TruXport # TX271101. As far as the replacement right rail # TX2711-RightRail, I confirmed with TruXedo that the rail comes fully assembled with the plugs, seals, velcro, and latch. view full answer...
The K-Source towing mirror, # KS62094G, for the 2012 Chevy Silverado has heat, power, and turn signal functions (if the truck came with those functions) but does not have a power folding feature. The compatible passenger side mirror is # KS62093G. view full answer...
Yes, the gooseneck hitch ball does come with the Curt Double Lock, Flip and Store Underbed Gooseneck Hitch w/ Installation Kit # C607-604 that you referenced. I attached a review video that shows what it comes with as well as an install video link for you to check out as well. view full answer...
The B&W Gooseneck Hitch # BWGNRK1067 is a confirmed fit on both the short-bed and long-bed versions of your 2006 Silverado 2500HD. This excellent 30K-rated USA-made hitch does NOT include the 4-inch hole saw needed for making the ball hole. An install video is linked for you.
For an in-bed wiring harness you can use Bargman part # 50-97-410. view full answer...
Both the Yates Keel Roller for Boat Trailers - TPR - 10" Long - 5/8" Shaft Item # YR1000Y and the Yates Keel Roller for Boat Trailers - TPR - 10" Long - 5/8" Shaft - Blue Item # YR1000B are replacement rollers. Each roller is a different size so depending on what bracket you have currently. So these rollers do not come with the brackets. These are both designed for a 10" wide bracket with 5/8" diameter shaft. Here's a bracket that it will fit # CE10304G but we do not carry a 10" wide roller.
If... view full answer...
The Westin Sportsman Grille Guard # 45-1240 does come as seen in the pictures (minus the driving lights). So it will have that second, upper bar. The instructions which I have linked for you also show it this way.
There are other versions of the Sportsman grille guard that have a single bar up top but # 45-1240 has both bars. view full answer...
The Replacement Heavy Duty Snap-Up Bracket for Reese Weight Distribution Systems # 58392 is a quantity of one replacement bracket, so if you are needing replacement brackets for each side of your trailer you will need to order a quantity of two.
I included a video of the # 58392 for you to take a look at. view full answer...
The B&W Turnoverball Underbed Gooseneck Trailer Hitch, part # BWGNRK1067 includes the installation kit for the trailer hitch and does include a bracket to re-install the factory braking system as mentioned at the 3 minute 18 second mark on the attached video. This bracket and how it is installed is shown at the 4 minute 54 second mark.
I have attached a photo of the location the factory braking system is under your truck.
Being able to simply remove the ball form the hitch, flip it... view full answer...
The Westin E-Series round nerf bars # 23-3545 you referenced will include 1 pair of tube steps (2 steps total) which is the same as all of our tube steps. Unfortunately, they won't fit a 2006 Chevy Silverado.
I included a link showing you all the Westin round steel tube steps that will fit as well as all other brands. If you let me know if you have an extended or regular cab and HD or LD, I would be more than happy to provide you a recommendation. view full answer...
Aside from price, the difference is that Ultra-Fab stabilizer # UF21-001090 is a single unit, while # UF21-001091 comes in a quantity of two. I've added links to review videos of each of these products for you to take a look at. view full answer...
Yes. The Replacement Driver's Side Rail for Access Original Soft, Roll-Up Tonneau Cover # A22285 does come with the velcro strip installed in the channel on the rail; the weather stripping comes included as well. view full answer...
The Air Lift Compressor System for Air Helper Springs # AL25850 you were looking at does not include the helper springs.
Since you have a 2013 Chevrolet Silverado you will need one of the following options: Air Lift # AL57204 if you have a 1500 that does NOT have the 8' bed, the # AL57211 if you have a 1500 with a 8' bed, or the # AL88338 if you have a 2500/3500. view full answer...
The Taylor Made Marine Gas Strut for Boat Hatches part # 3691850 is for just the strut. We have several options for the 10 mm bases however to pick what works best for you like the Taylor Made Angled Mounting Brackets for Gas Struts part # 3691883 or the Taylor Made Flat Mounting Brackets for Gas Struts part # 3691880. view full answer...
The frame of the grille is not included for the Putco Punch Stainless Steel Grille Insert # P84157 for your 2005 Chevrolet Silverado.
This is just the insert that sits above and below the Chevy Bowtie on your grille. view full answer...
The studs are built into the assembly, but they are not shipped with nuts or washers. I would recommend using some sort of locking washer with a locking nut, nylon or otherwise, to make sure the assembly does not loosen. view full answer...
Yes, all of the hardware is included with the # 13301 hitch.
The only thing that isn't is on 2014 and newer trucks there's a light duty bumper hitch that needs to be removed and some of the washers for that need to be reinstalled after it's removed. Those washers are reused and do not come with the hitch but they're already on the truck so if yours is this new then you have them. view full answer...