The frame on the Custom Third Brake Light Camera for Aftermarket Monitor # GCH94FR is made of plastic while the camera is made of aluminum. The frame gets screwed in for installation and is strong enough to handle a car wash. view full answer...
Yes, the Progressive Dynamic Transfer Switch # PD52DCS has over/under voltage protection. I've attached the installation details and have also attached a photo with these highlighted from the manufacturer information.
We highlight these features in our description because we know our customers are often concerned about this protection. I don't know why they don't highlight that on their page because they do in their product instructions. I think this is an important feature and you... view full answer...
Weigh Safe ball mounts like the part # LTB8-25 are made in the USA.
As long as the hitch on your 2014 Ram 2500 is a 2-1/2 inch hitch this ball mount will fit it and work well. It can provide a max drop of 8 inches. view full answer...
If you have a 2013 Ram 3500 4WD the Draw Tite hitch part # 65063 is a confirmed fit and would work well. If you have a 5500 though we do not have a front hitch. view full answer...
Titan Chain Snow Tire Chains w/ Cams - Ladder Pattern - V-Bar Link - 1 Pair item # TC2828CAM comes with 2 tire chains. You will need to order two of these for all four tires on your 2015 Ram 2500. view full answer...
Draw-Tite manufactures their receiver hitches in Mexico. If you'd prefer something manufactured in the USA, Curt offers a similar hitch as part # C13295.
If you need a trailer wiring harness but you already have the factory tow package, you'd use # HM40975 or # 22112 if your ProMaster doesn't have the tow package. For a ball mount, use # C45030 and for a 1-7/8 inch ball use # 19260 or # 63845 for a 2 inch ball. Then you will need a pin and clip like # PC3.
I've linked you to some installation... view full answer...
The Rhino-Rack Vortex Bars are slightly bowed in the longer bar options to help support the weight when applied to the center of the bar. Most manufacturers have this as a part of the aero bar design. If you want a more straight bar, then you will want to instead use the heavy duty bars like # Y01-120B-NT for the track system or # RB1375B-2 for just the crossbars. There are longer bars like # RB1500B-2 and # RB1650B-2 if desired. view full answer...
The Mighty Cord 50 Foot RV Power Cord Extension w/ Finger Grip Handle - 50 Amp # A10-5050EH referenced in your question is constructed of heavy duty 4-wire 6 and 8 gauge wires. This is a 125/250V cord with a female plug that will connect to the 50-amp plug on your RV power cord and a male plug to connect to a 50-amp outlet on an electrical box. view full answer...
The loadstops that are included with the Thule TracRac TracONE, part # TH27000XTB, are actually made of metal. I went out to our warehouse just to get a feel for them and they're actually pretty stout. view full answer...
The Reese Replacement Ball # RP19311 is a Reese product even though it doesn't have their name stamped on the product. Reese does make this product in China.
For a Made In The USA product the B&W Ball and Safety Chain Kit # BWGNXA2062 is the one I recommend. This will also give you the safety chain mounts as well as a carry case to keep everything together. view full answer...
The Adjustable Ball Mount for 2" Hitches part # TK5007 is a great economical adjustable ball mount option. It however is made overseas. If you're looking for USA made you'll have to consider some higher end options. The Gen-Y Rebel X Adjustable Ball Mount part # GY99VR is a great choice made in the USA. It offers up to a 7.5" drop.
I have attached a list of Gen-Y ball mounts which are all made in the USA. view full answer...
When you order Trailer Hitch Receiver Lock # e98882. Change the quantity field to "3". Above that section there is a section named "Keyed Alike". There are two options to choose from which are Keyed Alike or Keyed Unique, just choose Keyed Alike and you will be good to go. view full answer...
The 30866 you referenced is no longer available but the # RP30047 is and would be a great solution. It can easily be used with a Reese Revolution pin box.
The correct rail adapter you'd need for this hitch to install in your 2018 Ram 2500 with the factory rail kit is the part # RP30154. view full answer...
The Stromberg Carlson Campfire Grill - Stake Mount - Chrome-Plated Steel # GR-1522 is made of chrome plated steel.
The stake itself measures 36" long and is made of black powder coated steel for a clean finish as well as help negate corrosion.
Additionally, the grill measures 15" wide, 22" long, and has a 5-lb weight capacity. view full answer...
The part # 311-SWDA24A55 you asked about is the "original" Pace Edwards SwitchBlade Hard Tonneau Cover whose cover is aluminum and has a "vinyl grain" finish according to the manufacturer.
This is different from the Pace Edwards SwitchBlade Metal Hard Tonneau Cover # 311-SMDA24A55 which has a gloss black finish.
Both of these tonneau covers are fits for your 2019 Ram 1500 with a 5-1/2 foot bed (without Ram Box) and are no-drill installs. The SwitchBlade is one of the sleekest looking... view full answer...
I have a solution for you, and while most Fastway products are made in the U.S.A. it looks like the steel # FA49-00-5925 was not. Instead, I recommend using the aluminum Flash E Series HD Adjustable 2-Ball Mount # FA42-00-2925 which has a similar 10" rise and drop as well as an 18000-lbs capacity. All Fastway aluminum products are made in the U.S.A.. Since it's made from aluminum it's going to be lighter weight and will stand up better to corrosion over time than the steel version.
I've... view full answer...
The Firestone Universal Air Compressor Mounting Kit - Clamp On # F2497 is made of steel, but it is not stainless steel. For a compressor like the Firestone Air Command I # F2158 and the mounting kit, you will want to keep it away from heavy moisture (think submerging it), but otherwise the compressor and the mounting kit are able to withstand standard moisture that you'd see from everyday driving. view full answer...
The Taskmaster Steel Modular Trailer Wheels with Black PVD Finish # 460545MBPVD are definitely not a flat black paint and I suppose that you could compare them to a black chrome color since they do reflect light very well. I would definitely say they're closer to a black chrome than just black paint. It also will not chip or peel in the same way that a chrome covered wheel would, so the PVD coating is more durable.
. view full answer...