The etrailer Replacement RV Dinette Tabletop part # e84RR should be okay to use as part of a dinette bed combo, just make sure you secure the table use two legs and not one as this will give you more support. That said, these are not specifically designed for this so that is something to keep in mind. If you put all your weight on the table it will probably break but if you disperse the weight of your body across the table and benches it should be fine. view full answer...
The Gustafson RV LED Pendant Light, # 277-000461 has threads on the top of the rod. These threads feed through the ceiling mount plate and have a nut attached to hold it in place, see attached image. If you cut the rod shorter you will cut away the threads. However, if you are able to rethread the rod yourself I suppose, yes, you can make it shorter. view full answer...
The Gustafson RV LED Pendant Light part # 277-000451 has a rod that is threaded on both ends to accommodate the nut that holds the pieces together. Shortening it is possible but not an easy task. You would need to disassemble the fixture. Cut the tube down to you desired length. Then you would have to use a tap and die set to replace the threads back on to the rod which is where the difficulty would come in. view full answer...
The Optronics LED RV Interior Double Dome Light part # RVILL34 has two wires, black for power and white for ground. In order to use this to replace an existing light you'd need to test the wires on the trailer with a circuit tester to determine which is power and which is ground. I do not recommend matching wires by color. view full answer...
The Gustafson RV Ceiling Light # 277-000400-331 that you referenced features a mounting base with 3 bolt holes that are spaced apart by 4-1/4" (center to center). When installing the assembly you can indeed drill into the ceiling itself for secure attachment.
Hardware is not included with the light but you can easily obtain this at a local hardware store. The actual size/length of the screws will just depend on the thickness and material of your RV's ceiling. Depending on how your old... view full answer...
Gustafson RV LED Ceiling Light # 277-000454 really is a simple install: three screws for mounting it to your ceiling and two wires for connection (white for ground and black for power). You'll also need butt connectors # 05732-2 or wire nuts to connect the wires.
For hardware you can take your installation lead from the screws that are holding the existing light in place. If they are wood screws, then use wood screws to install the Gustafson. If they are sheet metal screws then use that... view full answer...
The Camco RV Grill Mounting Rail part # CAM57268 is designed to be used with a rail on an RV grill like the Faulkner BBQ Grill part # FR51323. You would need to obtain a bracket similar to that on the grill and attach that to the table as the Camco RV Grill Mounting Rail cannot be mounted to one another.
In order to mount your table to the side of your camper you may be better suited with a hinge like part # PLR2216-SSP and hasp like part # ML702D. view full answer...
Thank you for the photo, and I reached out to Lippert for you who told me even with an awning already on your slide-out, it was possible to mount a slide topper, which for your 12'5" (149") flange-to-flange measurement is the Solera RV Slide-Out Awning # LCV000165061.
Keep in mind you will need at least 7 inches of clearance on either side, and I can't quite tell from your photo if there would be interference on one side, but if so you would need the next size down, the Solera RV Slide-Out... view full answer...
I reached out to GSI and my contact confirmed that you will be able to microwave the bowl or cup included in the GSI Outdoors Escape Table Set with Cutlery - 1 Person # GSI49SV. She did mention that if you are microwaving for an extended period of time to keep an eye on the them, but with normal use they will be fine.
This set is a great choice for camping, or for in an RV since it is collapsible down to 1" to safe valuable space in your backpack, or in your cabinets. view full answer...
To upgrade a Kwikee Series 25 RV step you'd need the Replacement Motor with Table for Kwikee 25 Series Electric RV Steps # LC379804. view full answer...
I took a look at your generation of Furrion cameras, FOD43TA-BL, and you actually can't add additional cameras to this system.
Instead, to be able to add side cameras, you're going to need to upgrade your system. If you're interested, I recommend checking out the:
-Furrion Vision S Wireless RV Observation Camera System w/ Side Marker Light Cameras # FCE48TASL-05.
This system includes a 5" full color LCD monitor, two side cameras, and 1 observation camera.
I know it is not an ideal situation... view full answer...
That portion would be grill specific. While the Camco RV Grill Mounting Rail # CAM57268 is a universal rail that works with most grills the other parts are not as universal. view full answer...
The Gustafson RV LED Pendant Light # 277-000461 referenced in your question features a 4 inch LED puck as its light source. It does provide a great beam spread with 300 lumens which will be plenty bright enough for use over a kitchen counter, table, or other similar application.
This is considered a hard-wired light so the bulb cannot be replaced. view full answer...
Yes you can absolutely use metal utensils with your Greystone Outdoor RV Griddle and Grill - Stainless Steel # WAY34FR.
If you're interested in a kit, I recommend checking out the:
-Tailgater Tire Table BBQ Tool Set with Storage Bag # TT37FR.
This kit includes a spatula, tongs, baster, large fork, large knife, and 4 skewers. view full answer...
Good question, and it sounds like you are asking if you need to calibrate the electronic level of the Hopkins RV Leveling Kit with Electronic LED Smart Level # HM0820K.
The answer to that is yes, you will need it calibrate it to level. To do this you can simply set it on a table or other flat, level surface beforehand, so your actual trailer doesn't need to be perfectly level to use it, you can install it after calibrating it.
I have added a link to a couple video reviews for you to check... view full answer...
The Furrion Vision S Wireless RV Backup Camera System part FOC48TA-B which was replaced by Furrion Vision S Wireless RV Backup Camera System part # FOS43TASF does allow you to make adjustments to the camera housing. The camera housing can be tilted up or down inside the bracket to give you a different viewing angle. I will say however that it does take a bit of force to tilt the camera up or down but this can be done so don't be afraid to use a bit more force.
I am not exactly sure I... view full answer...
The 90" x 48" MORryde RV Cargo Sliding Tray # MR32FR actually can be pulled out from either side of the trailer like what you mentioned! There is a latch system on either end that needs to be released to be able to pull it towards you so the rollers will stop when they reach a certain spot and stay stationary until you need to move the other side.
Let me know if you have any other questions! view full answer...
I do have an option for you but Furrion does not offer any sort of power cord adapter for the Furrion Vision S Wireless RV Backup Camera System FOS part # FOS43TASF. The best option to use this with your Subaru Ascent would be to add a 12 volt outlet with the 12 Volt Outlet Kit part # RM-9332. view full answer...
You cannot install the Atwood RV Carbon Monoxide Detector # AT32703 on the ceiling but you can install it on a wall near the ceiling.
Carbon monoxide, or CO, is slightly lighter than air and so it naturally tends to diffuse throughout an enclosed space in a fairly even distribution. It does not tend to sit near floor level the way that a heavier gas like propane vapors would, nor does it rise right up to ceiling height the way that a lighter-than-air gas would.
This unit can be placed... view full answer...
The Camco RV Battery Powered Level # CAM25505 is factory-calibrated, but may need to be recalibrated from time to time to insure accuracy. If the EzLevel seems to be acting irrationally making it difficult to level the RV, please refer to the instructions below.
1. Place the EzLevel on a flat surface like a dinning table, oriented so that the EzLevel logo is on top (it does not have to be a level surface).
2. Push the power button to activate EzLevel
3. Push and hold power button for 10... view full answer...
Go To Results