For your 2004 Monaco Monarco Class A RV you will need 13" to 15" of extension. The best option is going to be the Wheel Masters 2-Hose Inflation Kit - 22-1/2" Dually - Hub Mount item # WM8005 you were looking at. All of our two tire kits come with the mounting brackets. view full answer...
Since you have a Workhorse W22 Chassis you should have the Air Lift LoadLifter 5000 Ultimate System # AL88202 which would mean you need the Replacement Air Spring for Air Lift LoadLifter 5000 Ultimate System - Rear Axle # AL84201 to replace the bellows.
If you don't have the "Ultimate" and have a different model then let me know and I can find the correct replacement for you. view full answer...
I checked with Roadmaster and the correct Roadmaster Exact Center Steering Stabilizer for a 2002 Workhorse W-22 Chassis is part # RM32RR for GVWR's over 22K or part # RM88RR for GVWR's under 22K. view full answer...
Adding the Roadmaster Sway Bar # RM-1259-109, Steering Stabilizer # RM-RBK13-RSSA, and Blue Ox TigerTrak Rear-Axle Stabilizer TT2601 will greatly improve the handling of your 2005 Trek Safari Motorhome and make is much more pleasant to ride in.
When it comes to the Blue Ox TigerTrak # TT2304 and the Roadmaster TruTrac # RM-TRACW-22 front stabilizers the only real difference is that the TigerTrak is made of high-strength alloy steel for superior strength and comes with a 3-year warranty... view full answer...
To replace your Kwikee Series 32 903206000 RV steps you'll need the Kwikee Electric RV Step Complete Assembly # LC372261. This kit will come with everything you need; steps, motor, switch kit, and controller to completely replace your outdated RV steps. view full answer...
We do have both front and rear SumoSprings (made by SuperSrings) which fit your 2004 Gulf Stream 8368 MXG on a Workhorse W22 chassis. The correct fit for your motorhome are the following:
- Rear: SumoSprings Maxim Custom Helper Springs # SSR-280-54-1
- Front: SumoSprings Solo Custom Helper Springs # SSF-280-47
These will do a great job helping to keep your Gulf Stream stable and balanced for a smoother, more controlled ride. view full answer...
I have a great solution for you that will not require you to lift your food truck. I recommend the Timbren Rear Suspension Enhancement System item # TWRW22.These hollow rubber springs have an 8,600 lbs capacity and sit above the rear axle to help stabilize and level your food truck. They work independently from side-to-side to minimize sway and help compensate for off-center loads. We have had other customers, with food trucks, use these successful and write us back.
We also have a set... view full answer...
The steering stabilizer we offer that is designed to work with your 2010 Workhorse W24 is part # RM-RBK13-RSSA.
This attaches to the steering mechanism on one end and on the other end attaches to the chassis undercarriage. This stabilizer helps you keep control of your motorhome and help correct over-steering when you are in high winds or driving on uneven roads. view full answer...
I would recommend a dual path air compressor like the Air Command II Xtreme Duty Compressor # F2549. A dual path compressor will allow you to adjust 1 set of air bags front to back and side to side individually or 2 sets of air bags front to back.
The Air Command II Xtreme Duty Compressor # F2549 has a pneumatic control panel with white face that allows you to see air levels and adjust from the cab of your motorhome. This system is made in the USA and includes everything you need to control... view full answer...
The correct SumoSprings Solo Custom Helper Springs for a 2009 Workhorse W-22 Chassis is part # SSF-280-47 which is sold as a pair. I have attached an install video I did below as well. view full answer...
I did some digging on your 2006 Itasca and it looks to be built on a Workhorse W series chassis so for a rear sway bar you'd want the part # RM-1259-108. Then for the front bar you'd want the part # RM-1259-105. view full answer...
Yes, if you're currently using the Air Lift 1000 Air Helper Springs for Coil Springs # AL81560 you can remove those when you install the SuperCoils Custom Suspension Coils # SSC-11 on the front of your 2000 Workhorse P32 Chassis. view full answer...
The correct Roadmaster Reflex Steering Stabilizer with Mounting Brackets for a Workhorse R-Series Chassis (UFO R26) is part # RM-RBK13-RSSA. view full answer...
The correct Roadmaster Front Anti-Sway Bar and Bushing Kit for a 2000 Fleetwood Flair 25Y on Workhorse P Series Chassis is part # RM-1109-116. view full answer...
The Timbren front kit part # TWFRW22 that fits your 2005 Workhorse W22 is much stiffer than the # SSF-280-47 you have now. If stiffer and more supportive is what you want this would be the way to go. If you are wanting a softer ride though this is probably not going to be it. view full answer...
The direct replacement step for your 2005 Holiday Rambler P Series Workhorse would be Replacement Steps, Motor, and Switch for Kwikee RV Electric Steps Item # LC3722617. view full answer...
Your 2007 Fleetwood Bounder is built on a Workhorse W Series chassis so for a steering stabilizer you would want the part # RM-RBK13-RSSA which is a confirmed fit and would work well.
The sturdy steel spring on this stabilizer keeps your vehicle in line by constantly working to maintain its position. Mount it between the steering mechanism and the chassis for a tight connection that will minimize wander and correct oversteering. view full answer...
While we don't currently have any Blue Ox branded suspension enhancement for your Thor Four Winds Hurricane on a Workhorse W18 Chassis we do have the following Roadmaster enhancements:
Roadmaster Front Anti-Sway Bar # RM-1259-115.
Roadmaster Rear Anti-Sway Bar # RM-1259-118.
Roadmaster Reflex Steering Stabilizer with Mounting Brackets for Class A Motor Homes # RM-RBK8-RSSA.
We also carry a front anti-sway bar with a TruTrac Rod which will give you better control of the side-side and... view full answer...
Roadmaster steering stabilizer # RM-RSSCP30 fits both the 2000 Workhorse P30 and P32 chassis! It is intended for models that came with an OEM dampener.
If yours does not have an OEM dampener you would use # RM-RBK3-RSSP30 and it also fits both the P30 and P32 chassis. view full answer...