Expert Answers about Toyota Sequoia

• Will Erickson E-Track Tie-Down Kit Fit X-Track System
• Yes, the Erickson E-Track Tie-Down Kit # EM58523-09162 will work with an X-Track system like the CargoSmart # 3481787.
  view full answer...


• Will Mounting Kit for Thule Pull Top Ski Rack Fit OEM Crossbars on 2007 Toyota Sequoia
• Yes, the Mounting Kit for Thule Pull Top Rooftop Ski and Snowboard Racks # TH7520970001 will fit the OEM crossbars of your 2007 Toyota Sequoia. This kit will allow you to mount your Thule Pull Top - Easy Loading Rooftop Ski and Snowboard Rack TH726 to those bars.
  view full answer...


• Larger Tires and Axle Lift Kit for 2006 Jayco Jayfeather 23B Travel Trailer
• The Torflex Axles on your 2006 Jayco Jayfeather 23B will allow you to add a lift kit and utilize bigger tires. I didn't get your photos, but the measurements you gave will clearly allow this. There is no horizontal movement. You most likely have Torflex #10 axles which are rated for 2,300 to 4,000 lbs and have a distance between the bolt holes of 8 inches center to center. For this you will want the Torflex Lift Kit - Single Axle - 2-5/8" Lift # K71-707-01. If you have a different...
  view full answer...


• Can WeatherTech Cargo Liners for 2015 Toyota Sequoia Fold
• The WeatherTech Cargo Liner, such as part # WT4555, is made of a durable plastic. Though they aren't rigid and would likely fold, the liner is not designed to fold. Folding the liner would likely warp the plastic and possibly damage the sidewall that runs all the way around the mat. I recommend taking the mat out when you need to use the third row seating. The WeatherTech Cargo Liners that fit behind the third row of seats, like # WT40345, would not need to be folded or removed to access...
  view full answer...


• Durability and Warranty for Timbren Suspension Enhancement on a 2008 Toyota Sequoia
• I would be happy to help you. The Timbren Rear Suspension Enhancement System item # TTORSEQ1 is a confirmed fit for your 2008 Toyota Sequoia. I spoke to my rep at Timbren and they told me the answer to your question depends on how you use them but they will not dry out, harden, or crack. They have had customers need to replace them within a year but those have been on heavy duty service vehicles that get a lot of wear and tear. They typically will last past 10 years. I pulled some information...
  view full answer...


• Will the SportRack Vista XL Cargo Box Fit on a 2007 Toyota Sequoia With a Factory Roof Rack
• As long as the crossbars on your 2007 Toyota Sequoia have a spread between 24 and 34 inches and the crossbars themselves are not wider than 4 inches the SportRack Vista XL Cargo Box, # SR7018, will fit. You can measure your crossbar spread by measuring from the center of one crossbar to the center of the other. The hinges inside of this cargo box will only allow the box to open one way. You can lift the box open when you are standing on the side of the vehicle, but the lock will be located...
  view full answer...


• Will the Hopkins HM11143325 Fit a 2005 Toyota Sequoia SR5?
• The ports the Hopkins # HM11143325 will plug in to will be under the bumper towards the driver side of the vehicle. This is designed to be used on a 2005 Sequoia that was originally equipped with a towing package. If you are unable to locate the ports or are unsure if the vehicle did have a factory towing package, you can call a Toyota dealer with your VIN and they should be able to tell you if it did or not. If you do not end up having the factory tow package, you will need to install...
  view full answer...


• Determining if Dexter Trailer Brake Assemblies # 23-26-27 Fit 1995 Shorelandr Trailer
• We don't have a way to determine what axle your trailer has but if it has 3,500 lb axles then yes the brake assemblies # 23-26-27 would work. You can also measure the drums to see if they 10 by 2-1/4 inch as well and if so these are correct.
  view full answer...


• Compatibility Of etrailer Trailer Coupler Lock e98895 With Coupler Having Guide Lip
• I took some measurements off the etrailer Trailer Coupler Lock # e98895 that will help you to determine if this will fit your coupler. The maximum width of the coupler tongue channel is 4-1/2" wide, and 2-3/4" deep. The locking pin is 1-3/4" from the edge of the insert or 1" from the end of the coupler. The lip thickness must be under 5/16" to fit properly.
  view full answer...


• Will the Pro Series Trailer Hitch Mount Cargo Carrier with Ramp Fit a 2012 Toyota Sequoia
• To determine what size receiver you have on your 2012 Toyota Sequoia, you will need to measure the receiver opening (the inside width, not the outside width) like in the FAQ article I have linked for you. There is often a sticker on the hitch itself that states the towing and tongue weight capacities of the hitch. You should also be able to find this information in the vehicle owners manual. If you determine that you have a 2 inch trailer hitch then the Pro Series carrier with ramp, #...
  view full answer...


• Will the Yakima MegaWarrior Cargo Basket Fit a 2013 Toyota Sequoia with Factory Roof Rack
• I checked with Yakima and the MegaWarrior cargo basket # Y07080 is a fit for the factory roof rack on a 2013 Toyota Sequoia. I have included a link to a video review and a link to the instructions for the MegaWarrior for you. This basket is large at 52 inches long and 48 inches wide. But you can make it even larger by adding the extension # Y07082. This will add 22 inches of length to the basket making it 74 inches long; over 6 feet long.
  view full answer...


• Fit of Air Lift AL90786 Air Helper Springs on 2018 Toyota Sequoia Limited SUV 2wd
• The Ai Lift 1000 Air Helper springs you specified, part # AL60786 is indeed compatible with a 2WD 2018 Toyota Sequoia, as confirmed by Air Lift, UNLESS the vehicle is equipped with the factory auto-leveling system, such as what's found on the Platinum model. If you click the provided link, you can see a demonstration video where my buddy Conner will run you through a demonstration of the air helper springs.
  view full answer...


• Is There A Confirmed Fitting Coil SumoSpring For A 2010 Toyota Sequoia
• SuperSprings doesn't currently have a confirmed fit for Coil SumoSprings for a 2010 Toyota Sequoia, but you can measure to see if one of their models will fit. While the vehicle is on the ground with weight on the coils you'll need to measure the distance between the coils in the center of the spring. Once we have this dimension we can look for a compatible match. If there isn't a compatible match then the only other option to stiffen up the coil springs would be to install Firestone...
  view full answer...


• Do I Need To Install A Brake Controller To Activate Or Deactivate Surge Trailer Brakes In Reverse?
• Great question. Let me cover brake activation first. If you wish to have active braking on a hydraulic system when backing up, you would need to have Electric over Hydraulic brakes and not a surge brake coupler. Surge brake couplers do not allow active braking when in reverse. To add the electric over hydraulic system, it will require a brake controller like # 39523 and an electric over hydraulic brake actuator like the HydraStar Vented Marine Electric Over Hydraulic Actuator for Disc...
  view full answer...


• How To Use Redarc Tow Pro Elite Trailer Brake Controller On 2021 Toyota Sequoia
• The Redarc Tow Pro Elite Trailer Brake Controller part # RED44FR is an excellent option for a 2021 Toyota Sequoia. In order to use one of the panels in the dash you'll need to add the Mounting Panel part # 331-TPSI-002 . In order to plug into the vehicle's brake controller port you'll also need the Tekonsha Custom Wiring Adapter part # 3040-P along with # 331-TPH-017.
  view full answer...


• Is Curt 5-Bike Rack Compatible With 2018 Toyota Sequoia
• Your 2018 Toyota Sequoia Limited is absolutely compatible with the Curt Premium 5-Bike Rack for 2" Hitches # C18065. This 5-bike rack has plenty of clearance away from your Sequoia to keep it safe, and is a fantastic value option for carrying 5 bikes. The only thing to keep in mind is if you have a step-through frame or are carrying a small child's bike you will need to give those bikes a horizontal mounting point with the Bike Frame Adapter Bar # 64005. I have added links to video reviews...
  view full answer...


• Will the Yakima MegaWarrior with Extension Fit a 2008 Toyota Sequoia with Factory Roof Rack
• The Yakima MegaWarrior cargo basket with extension, # Y07080-82, will attach to the factory crossbars on your 2008 Toyota Sequoia. The basket is with the extension is 74 inches long though so there is a possibility for interference with the rear hatch. My recommendation is to use the regular MegaWarrior, # Y07080, and once mounted you will be able to determine if adding the 22 inch extension, # Y07082, would cause interference or not. Yakima lists the factory roof rack capacity for your...
  view full answer...


• What Custom Towing Mirrors Are Available For A 2005 Toyota 4Runner
• For your vehicle I have a couple of towing mirror recommendations, but the Longview Custom Slide On Towing Mirrors, part # CTM400, will not work on your 2005 Toyota 4Runner. The mirrors have a different outer construction that prohibits the use of the slide on towing mirror, part # CTM400. The Universal Clip-On Towing Mirror, part # 7070, is easy to install and remove, once the initial setup is done. I am including a link to a video review on this strap-on mirror. Another towing mirror...
  view full answer...


• Do Helper Springs for Coil Springs Work on Lifted 2015 Toyota Sequoia
• So long as your lifted 2015 Toyota Sequoia uses the same coil springs that came with your 2015 Toyota Sequoia, you wil still be able to use the Air Lift AirLift 1000 Air Helper Springs for Coil Springs # AL60786. With these, I do recommend a compressor as well in order to make inflating and maintaining the psi a much easier task. For this the best option is the simple Air Lift Load Controller II Compressor System # AL25592. I have added links below to some video reviews for you to check...
  view full answer...


• Does Bump Stop Need to be Cut Same Length on Firestone and Air Lift Springs in Toyota Sequoia
• I took a look at the installation manual for both the Firestone Coil-Rite # F4124 and AirLift 1000 Air Helper Springs # AL60812 that fit your 2003 Toyota Sequoia and the directions do differ a bit in terms of cutting the factory bump stop. The Firestone specifies cutting the four convoluted sections of the bump stop while the AirLift requires measuring up to 6.75" from the flat surface that the jounce bumper strikes inside the coil spring which is where it will be trimmed. I have cut...
  view full answer...