Yes, the Rhino-Rack ROC25 Roof Rack RR39RR is a fit for your 2013 Subaru Legacy with the naked roof, but we also have it listed as discontinued. If you like the sporty look of this rack then I recommend checking out the Inno alternative which includes the following:
45" Aero Crossbars - # INXB115-2
Flush Feet - # INXS200
Fit Kit - # INK851
If you let me know what you plan on using the roof rack for I'd be more than happy to make some recommendations for you! view full answer...
I have a solution for you, but 141761 is an old part number that is no longer available and Rapid Traverse Feet # TH480R is not going to work with Fit Kit # TH145193. You would instead need to go with the recommended setup for your 2015 Subaru Legacy which is Fit Kit # TH145193, Evo Clamp Feet # TH710501 and then either Thule Wingbar Evo 53" Crossbars Silver # TH711400 (also available in Black # TH711420), or Thule SquareBar Evo 53" Crossbars # TH712400. view full answer...
We actually have a trailer hitch receiver that fits a 2022 Subaru Legacy right now! It is a Class III, 2" hitch receiver, and is the following part number:
- etrailer Trailer Hitch Receiver # e25TR
There is even a 4-way trailer wiring harness that fits a '22 Legacy if you were planning on doing some light towing, the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C79CR. view full answer...
The Curt # C12270 you were looking at will fit your 1991 Subaru Legacy Wagon perfectly, as Curt says it works with all models of the Legacy, the sedan or wagon.
If you're going to be towing anything with your vehicle you'll need to get a wiring harness # 119147KIT as well. view full answer...
If your 2007 Subaru Legacy factory spoiler is the low profile design with no gap between it and the trunk then you won't have a problem using a trunk mount bike rack such as # SA805BL. If it is the taller one found on WRX/STi models then there could be fit problems and Saris states that their racks will not fit.
If you do have the taller spoiler you could use the SeaSucker Komodo # 298-BK1910-GO or go with a trailer hitch and hitch mounted bike rack. If you want to go with a trailer hitch... view full answer...
Yes, the Curt hitch # C12270 will fit your 2001 Subaru Legacy Wagon, we also have the Draw-Tite Trailer Hitch, # 36284 to consider. I have included a link to the installation instructions along with a video showing a typical installation on a similar vehicle for both of these hitches. These will help you decide between these nearly identical hitches.
If you plan on doing some towing with the hitch, the recommended ball mount is # 36061, and it should be used in the rise position only.... view full answer...
All three of the trailer hitches that fit your 2023 Subaru Legacy only have the hitch opening that hangs below the rear bumper.
etrailer # e25TR
Curt # C67JR
EcoHitch # EH36RR
Since it has the highest towing capacities and best price I would go with the etrailer hitch. view full answer...
After doing a little searching I was able to determine that Curt trailer hitch # C12284 will fit a 2005 Subaru Legacy Wagon, Including Outback Wagons. None of the other hitches are confirmed to fit. The correct ball mount to use is # C45519. For a 1-7/8 inch ball use # 19256 and for a 2 inch ball use # 19258.
For a trailer wiring harness use # 118461. view full answer...
It will! I just verified with Curt that the hitch for a 2022 Subaru Legacy is a fit for your 2023 Subaru Legacy, with the correct part being the following:
- Curt Trailer Hitch Receiver # C67JR view full answer...
The Draw-Tite Class II 1-1/4 Inch Hitch, part # 36334, will fit your 2009 Subaru Legacy 2.5 Limited. I am including a link to the installation instructions on the hitch.
If you are going to do some towing, the recommended ball mount is Draw-Tite Ball Mount, part # 36071. For a hitch ball you can use Tow Ready 1-7/8 Inch Hitch Ball, part # 19256, or Tow Ready 2 Inch Hitch Ball, part # 19258.
For trailer wiring, use Wiring Harness, part # C59496. I have included a link to the installation... view full answer...
The Saris Bones 3 # SA801BL is a confirmed fit for your 2009 Subaru Legacy and has an arched base that will accommodate most spoilers. If you have an OEM spoiler then it should fit just fine.
I also recommend adding some security to your Bones 3 to deter theft of your bike(s) and bike rack. The Hatch Huggers # SA3035, and Cable Lock # SA981 can be added to help give you some peace of mind. You can also add the Saris Stabilizer Straps # SA3033 to help keep your wheels and handlebars stable.
If... view full answer...
Draw-Tite trailer hitch # 36334 is indeed a fit for your 2007 Subaru Legacy Outback sedan excluding Sport models. I think the problem that you had was the naming conventions of Subaru combined with Uhaul most likely focusing on the Outback part of the vehicle name. But hitch # 36334 does for sure fit the 2007 Legacy Outback sedan. I have linked the installation instructions and a video showing an example installation for you.
Hitch 36330, which is discontinued, fits the Outback Wagon.... view full answer...
The hitch you have is actually a Draw-Tite hitch # 75673 for your 2018 Subaru Legacy. It looks like in your picture the distance from the center of the hitch pin hole to clear the rear bumper is about 6 inches. That is consistent with what we have found when installing the hitch (see video link).
When folded up the Kuat Transfer # KU74FR measures 6 inches from the center of the hitch pin hole to the nearest part of the rack so it will not extend out far enough to clear the rear bumper... view full answer...
I have another solution for you but the Thule Passage 3 Bike Carrier # TH911XT will not fit your 2021 Subaru Legacy.
As an alternative you can use the Yakima HangOut 3 Bike Rack # Y02638 which is essentially the Yakima version of the Passage. This fits your Legacy and is compatible with a child's bike if you use an adapter bar like part # Y02531 which is the case for any hanging-style rack and a child's bike.
If you wanted something a little nicer you can jump up to the Yakima FullBack... view full answer...
You can absolutely use the Kuat Sherpa 2.0 bike rack with your 2012 Subaru Legacy, and all you need is the right trailer hitch in order to do so. For that, what you will need is a hitch from Draw-Tite:
- Draw-Tite Max-Frame Trailer Hitch Receiver # 75673
This hitch is a confirmed fit for your '12 Legacy and will allow you to easily carry the Sherpa 2.0. This is an awesome choice for a bike rack and one of my personal favorites as well because not only is it one of the easiest bike racks... view full answer...
The Rhino-Rack square bar roof rack that fits your 2015 Subaru Legacy is made up of square bars # RREB126B, legs # RRRLKVA, fit kit # DK416, and the adapters for the square bars.
To convert to Aero bars down the road you'll be able to reuse the fit kit and legs. You'll need the aero crossbars # RRVA126B-2 and you no longer will need the adapters at all. view full answer...
Nope, none of the EyeSight features on your 2022 Subaru Legacy will be interfered with whatsoever when installing the Curt 4-way wiring harness that fits, which is the following part number:
- Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C79CR
The Curt # C79CR plugs into the taillights on your Subaru so it knows when to activate the turn and brake signals on your trailer, but that's all it does; the 4-way won't have an affect on any part of your electrical... view full answer...
Yes, the SMI Air Force One Supplemental Braking System # SM99243 is compatible with motorhomes that use air over hydraulic brakes like your 2003 Safari. It is possible that you will need to use another 1/4" DOT air line but it is going to be compatible. I've added links to a pair of videos on this system for you to take a look at as well. view full answer...
The Hollywood Racks Express 2 Bike Rack with Hatch Anchors - Trunk Mount - Fixed Arms # HR84FR or the 3 bike # HR24FR are confirmed to fit by the manufacturer. view full answer...
Go To Results