Correct, the Curt Trailer Hitch Receiver part # CU64FR (C13435) replaced part C13399. The Curt Trailer Hitch Receiver part C13399 will actually not fit a 2018 Subaru Forester, only up to 2017 so the Curt Trailer Hitch Receiver part # CU64FR (C13435) is the one you will want to use. There was a change made to accommodate exhaust clearance issues. view full answer...
The Air Lift LoadLifter 5000 Ultimate Air Helper Springs with Internal Jounce Bumpers - Rear Axle 2006 Ford F-250 and F-350 Super Duty part # AL88291 does not require drilling into the truck frame for installation. However the kit that comes with this part number is designed to work only trucks with B&W Fifth wheel under bed kits 1105 or 1199R. If you do have the 1199R the upper B&W bracket will need to be ground down a bit to install the air bags. The only drilling that will need to be... view full answer...
For low clearance situations we have the Konig K-Summit tire chains. These have a very unique style as they secure via lug nut and then the chain rests on the tread of the tire only. Since the chain doesn't wrap around the back of the tire and "hug" it this means that this chain can be used in most applications where a snow chain would damage components on a vehicle.
The correct K-Summit for the 275/45R20 tires on your 2017 Volvo XC90 you need the XXL - Size K67 # TH2004565767. Please... view full answer...
Anytime that you use tire chains there is a possibility that may slightly scratch your wheels if they are not installed correctly. The Titan Chain part # TC2327 is designed with color coded connection points so as long as they are on the tire correctly they barely touch the actual wheel. This tire chain provides the best fit and easiest install for the tire sizes of 275/45-22, 275/55-20, or 275/65-18 on a 2018 Ford F-150. I have attached a video for your reference. view full answer...
I checked with the manufacturer and confirmed that the Longview Custom Towing Mirrors # LO54FR do fit the new body style of the 2019 Chevy Silverado 1500. In regards to the best fit, it is the Longview as they are custom made for this truck and have a knob that allows you to tighten the mirrors until they fit nice and tight on your Silverado.
I have added a link to a video review of the mirrors which I also recommend checking out. view full answer...
There are hitches that will fit both the 2009 Subaru Impreza and the 2013 Subaru Impreza, but the Curt # C11315 is not designed to fit on both of the vehicles and is only a fit on the 2009 Subuaru Impreza. If you're looking for a hitch that will fit both of these vehicles, the Draw-Tite Sport Frame # DT24959 has been confirmed to fit on both the 2009 and the 2013 models.
I've linked an installation video of the Draw-Tite hitch that you may want to reference back to when installing or removing... view full answer...
Larry, the correct replacement key you need for the Sears cargo box with the 2802 lock core is the Thule replacement key part # THKEYN2802. Thule manufactured the Sears cargo boxes so this is the one you need. view full answer...
Just like the BAK Revolver X2, the Revolver X4 (only difference between the two is the sheen on the tarp) is also compatible with the Thule TracRac SR Truck Bed Ladder Rack you'd looked at, part # TH43002XT-501. As you can see in the provided photo, the tonneau cover has plenty of room without interfering with the ladder rack. Keep in mind, it's only the TracRac SR, the sliding version that's compatible. The non-sliding TracRac models attach to the inside of the top of the bed side, which... view full answer...
The shipping weight of the EcoHitch Invisi Trailer Hitch Receiver - Custom Fit part # 306-X7257 is about 31 lbs. This hitch fits 2015 - 2019 Subaru WRX. It is a completely hidden design so the hitch is completely out of sight for a clean factory look on the WRX. I have attached a video for your reference. view full answer...
Are you asking if you can fit the Thule TracRac SR part # TH43002XT-501 on your 2010 Ram 1500?
Technically the correct rack for your truck is part # TH43003XT-501 but the only difference between the two is the height. Part # TH43002XT-501 is about 1-5/8 inches lower but the crossbars and the bases are both the same between the two. view full answer...
Yes the Rack'em Multi-Mount Grass Catcher # RCMMS4 does fit your 2018 Snapper 360Z as I was able to find pictures of the discharge opening and found that it's a compatible design with this.
I attached an install video for this for more info for you to check out as well. view full answer...
The Thule T2 Pro XTR 2 Bike Platform Rack part # TH83JV and the Draw-Tite Max-Frame Trailer Hitch Receiver part # 76182 for the 2014 - 2018 Subaru Forester are compatible. When it comes to bike racks and hitches you really just want to make sure that the bike rack has the correct sized shank to fit into the hitch and the weight capacity of the hitch can handle the maximum weight of the bike rack. The Draw-Tite hitch can handle 525 lbs tongue weight. The bike rack weighs 52 lbs plus the... view full answer...
The Kwikee RV Battery Tray # LC366499 has a capacity of 200-lbs, so with a total weight of 248-lbs, the 4 batteries you're trying to store on this are going to exceed the weight capacity. Unfortunately 200-lbs is the largest capacity tray we have available, but you could stack two of the # LC366499 into the battery compartment (or other storage area) and safely store all 4 of your batteries on these trays. view full answer...
Yes. You can use the AirLift Load Lifter 5000 # AL88216 air springs on your 1995 Chevy C/K Series Pickup with a 6" lift, but you will need to use an additional spacer like the Air Lift LoadLifter 5000 and LoadLifter 7500XL 6" Air Spring Level Spacers # AL52460. If you wanted to add a wireless compressor and leveling system, you'll want to use the Air Lift WirelessONE Compressor System for Air Helper Springs - Hand-Held Remote - Single Path # AL25980.
Another good option you can also use... view full answer...
Great news! The Roadmaster Falcon All Terrain, Non-Binding Tow Bar part # RM-522 is compatible with all Roadmaster vehicle-specific base plates like the Roadmaster Direct-Connect Base Plate Kit - Removable Arms part # RM-521448-5 for the 2016 Jeep Wrangler with a standard factory bumper.
The Roadmaster Falcon attaches to the base plate kit RM-521448-5 directly. You will need to remove the quick-disconnect brackets from the ends of the arms of the base plate. You will be left with lugs... view full answer...
While we have the exact nerf bars you need, that mounting hardware will not fit the nerf bars you mentioned, as both the mounting hardware and bars need to be compatible.
Since those don't fit you should be able to return them to the place you purchased them and get the right nerf bars that I confirmed with Westin are a fit for your 2020 Ram 1500 Classic Warlock with a Quad Cab:
- Westin Platinum Series Oval Nerf Bars - 4" - Black Powder Coated Steel # 21-3555
- Westin Platinum Series... view full answer...
I believe you are asking about fitting a Thule T2 bike rack in the Curt hitch part # C11497 that fits your 1997 Subaru Impreza. There is a T2 Classic that fits this hitch with the part # TH9045. It fits 1-1/4" hitches. Check out it's review video.
The T2 in the other question that fits the 2" hitch could have been the Thule T2 Pro XTR # TH83JV. view full answer...
The Hopkins 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket # HM40975 technically can be mounted in any orientation that fits on the back of your vehicle and or suits your needs. However, it is better if the plug is horizontal due to there being less of chance for water, dirt, or other debris getting into the connectors. Not using the included mounting bracket will also require drilling and possibly the fabrication of a custom bracket to mount it in the orientation you want it... view full answer...
If your existing hub uses 1-1/16 inch bearings, they will need to be replaced the exact same size bearings and races, # L44649, and # L44610. We also have the complete bearing kit available as part # BK1-150, which includes two 1-1/16 bearings and matching races, as well as a grease seal, cotter pin and EZ Lube spindle washer.
Although one sixteenth of an inch may not seem like much of a difference, no parts are more critical for the dependable performance of your trailer than the bearings,... view full answer...
Go To Results