I have included two links to the right. One is a list of trunk mount racks that fit the 2009 Nissan Versa sedan. The other link is for the hatchback models. Basically, all of the racks overlap in terms of fitting both the sedan and hatchback models.
For an inexpensive 3-bike model you can use the Hollywood Racks Express, # HRE3.
If you will be carrying any bikes that do not have a top frame bar that goes straight across (like a typical men's bike would) then I recommend using bike adapter... view full answer...
There are some Rhino-Rack roof racks that fit your 2014 Nissan Versa. The nicest are part # RR98GR in black. I like these racks because the bars don't stick out the sides of Versa for a nice, clean, factory look. The kit comes with everything you need to install except a measuring tape. view full answer...
My technical contact at Draw-Tite informed me that Nissan had a design change for the 2012 model year that entailed moving the exhaust from the left to the right on the sedan models such as yours. If you check your VIN, your 2011 Versa 4 Door Sedan was probably built on the cusp and they built it as a 2012 instead of the 2011.
The hitches that fit the 2012 sedans actually go over the exhaust and the exhaust needs to be temporarily lowered for trailer hitch installation. The Curt Trailer... view full answer...
I did some further research and found that SportRack does not have roof cross rails specifically fit for your 2018 Nissan Versa, that I could find, so I will not be able to recommend a solution with SportRack parts.
However you could entirely scrap what you currently have and install a Rhino-Rack solution by ordering the Rhino-Rack Vortex Aero Crossbars # RRVA118B-2 along with the Rhino-Rack 2500 Series Legs # RRRLKVA, and Rhino-Rack # DK232 fit kit. This is a custom roof rack designed... view full answer...
There is an economical roof rack that will fit your 5-Door 2008 Nissan Versa, but the SportRack Semi-Custom Roof Rack # SR1008 is not a fit; it does not have the appropriate crossbar length
Instead, I recommend the Inno Roof Rack which consists of Crossbars # INB127, Crossbar Feet # INSUT, and Fit Kit # INK313. This rack clamps to your Versa's roof and gives you the most economical rack available for your car; it has 50 inch square bars, a 120 lb capacity and even has locks to secure the... view full answer...
The Brophy 1-1/4 to 2-Inch Trailer Hitch Adapter # HTAD fits any 1-1/4-inch hitch and converts that receiver opening to the 2-inch size used for many hitch-mount accessory items, items like bike racks such as the Pro Series # 63153.
Do please note though that use of any adapter like this causes you to lose half of the hitch's rated capacity. This loss of hitch weight capacity occurs because the actual weight load is being moved further away from the hitch where it exerts more leverage... view full answer...
For your 2019 Nissan Versa Note, I recommend starting with the Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # C11378 you referenced. This hitch has a 4 inch measurement from the hitch pin hole to the outermost part of the bumper.
The Kuat Sherpa 2.0 2-Bike Platform Rack - 1-1/4" Hitches - Tilting - Black # SH12B will be compatible. I personally like the Kuat Sherpa because of the wheel mounted hooks for no frame contact and a little more clearance from your bumper. view full answer...
The Rhino Rack 2500 Series roof rack with Aero Crossbars, which consists of parts # RRVA118B-2, # RRRLKVA, and # DK047 is indeed a fit for your 2007 Nissan Versa.
If you don't already have a carrier, Yakima offers their JayLow, part # Y04073, which would allow you to carry up to two kayaks. The JayLow includes straps for securing one kayak to the carrier, as well as bow and stern tie-downs. For a second set use part # Y04031.
Thule offers the Hood Loops, part # TH529 which can be closed... view full answer...
I recommend looking into a CUSTOM fit roof rack like the Rhino Rack 2500 Series roof rack with Vortex Aero Crossbars. This rack consists of parts # RRVA118B-2, # RRRLKVA, and # DK047.
If price is your main concern the SportRack Semi-Custom Roof Rack for Naked Roofs # SR1002 will be your best option. This is the most economical roof rack offered for your 2007 Versa hatchback. Keep in mind, this is a semi-custom roof rack, so it was designed to fit your Versa, along with several other vehicles.... view full answer...
Yes, the Hollywood Rack trunk rack part # HRE3 that you referenced has been confirmed as a fit for your hatchback 2008 Nissan Versa. We haven't had the chance to install it on your specific vehicle and that is why we don't have a picture or a video that shows it on your vehicle.
If you plan on carrying any womens or alternative framed bikes without horizontal top tubes you may also be interested in purchasing a Kuat Bike Frame Adapter Bar # UB01 to provide a horizontal top tube on your... view full answer...
Yes, Roadmaster Stow Master Tow bars are a compatible fit with the Roadmaster Crossbar-Style Base Plate Kit - Removable Arms Item # RM-52357-4A with no adapters needed.
You'll also need the following items to flat tow:
Tow Bar Wiring: I recommend the Roadmaster Universal Hy-Power Diode Wiring Kit Item # RM-154.
Braking System: I recommend the Brake Buddy Select 3 Portable Supplemental Braking System - Proportional
Item # HM39524.
Safety Cables: I recommend the Curt Single Hook, Coiled... view full answer...
I have attached a link to all of the truck mounted bike racks that have been confirmed to fit a 2013 Nissan Versa. You will just need to select the vehicle style to see the options that are available for your sedan.
As for the book at the local dealer, we do not have, make, or print any type of book that is sent to dealers. You may have been looking at an outdated book from a specific bike rack manufacturer. Regarding the information on our site, it has been directly obtained from the... view full answer...
The Nissan Versa uses a Class I receiver, which is only capable of carrying two bikes due to the limited tongue weight capacity of the receiver. The Helium AeroPRO 3 Bike Model could certainly be used, but you would be limited to carrying two bikes when used in that receiver.
To determine if the Helium is compatible with your Versa, you will need to measure the distance between the hitch pin hole in your receiver and the furthest rearward point of the rear bumper. If this distance is less... view full answer...
There's two different options to tow your 2021 Versa. If you have an automatic transmission it can't be flat towed and the only way to haul it behind an RV is to use a trailer or a dolly like the Roadmaster Tow Dolly with Electric Brakes item # RM-2050-1.
If your 2021 Versa has a manual transmission you will need the parts listed below:
Tow Bar and Safety Chains - Roadmaster Falcon 2 Tow Bar item # RM-520 and item # RM-643
Base Plate Kit - Roadmaster Direct-Connect Base Plate Kit - Removable... view full answer...
We have not had anyone come to us with specific problems related to a 2011 Nissan Versa hatchback and tow bar wiring kit # RM-155. There are some things about the bulb and socket kit that you need to be aware of.
There is drilling involved with the installation of this kit. You have to drill into the back of the tail light housing to mount the bulbs. There needs to be enough space inside the housing for the bulbs to fit without melting the tail light lens. There needs to be 1/4 inch of... view full answer...
The best hitch for your 2008 Nissan Versa Hatchback is going to be the Curt Trailer Hitch item # C11348 you were looking at. To get it installed you will want to scroll down the left side of the hitches product page and go below the pictures and videos. You will see a blue link that says Locate installers near me. Go ahead and click on this and put in your zip code and you will find a list of reputable installers near you.
This is the highest capacity hitch available for your car. There... view full answer...
The portion of the product description you are referring to states that the trailer converter and wiring, part # 119178, should not be used with vehicles that are equipped with LED lights. Trailers equipped with LED lights are fine. Part # 119178 is fine for both your Altima and Versa as long as they are not equipped with LED tail lights and blinkers.
The reason why it should not used with LED vehicle lights is because LEDs use much less current than incandescent bulbs. LEDs are new to... view full answer...
All of the hitches listed for the 2009 Nissan Versa (see link) will fit both the sedan and hatchback.
Some items you may need to complete your towing setup with a Class I hitch are listed below.
Drawbar # 3593
Pin and Clip # PC2
Wiring # C59496
Hitch Ball # 19256 or # 19258
Hitch Lock # e98879 view full answer...
According to Curt, their Class I trailer hitch, part # C11256 is designed to fit the North American market 2012 Nissan Versa. The fit of the hitch hasn't been tested on a Nissan Tiida. According to my research, it's the same vehicle but it's not clear if the rear structure of the vehicles are identical.
Look under the rear bumper, and find the holes in the frame mebers that serve as the hitch attachment holes. If these holes are 37-1/4 inches apart, center hole to center hole, then the... view full answer...
A Class I hitch, including the Curt # C11348 that would fit on your 2010 Nissan Versa has a relatively low tongue weight capacity of 200 lbs. The tongue weight capacity represents the maximum amount of weight that can be safely hung from the hitch.
This means that your Harmar AL 160 Profile Scooter Lift plus the weight of the scooter itself could weigh no more than 200 lbs. Exceeding that weight limit could cause the hitch to bend or the hitch attachments to the vehicle to fail, which... view full answer...
Go To Results