The Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" # DT22MR works with all models and variations of the 2022 Hyundai Tucson, including hybrid.
And the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # CU94FR is also compatible with your Tucson too.
If you are going to be towing I suggest getting an etrailer Ball Mount Kit for 2" Hitches - 7,500 lbs # 989900 to complete the package. view full answer...
The Curt Trailer Hitch Receiver part # C13240 is what I recommend for a 2018 Hyundai Tucson. It will fit models with dual exhaust tips as you can see in the photo below, just not Night Edition models. This hitch will be great for towing or hitch mounted accessories like bike racks such as the Thule Hitching Post Pro Bike Rack part # TH934XTR which is what I recommend. view full answer...
I took a look at your 2020 Hyundai Tucson Limited and it has two exhaust tips on the passenger side which will work fine with the Curt Hitch # C13240 as that's considered single exhaust by the manufacturer.
The night edition has dual exhaust tips, one on each side of the car which causes the problems with the hitch fitting, and is the only fit exclusion. view full answer...
The Curt trailer hitch is what you'll want to install on your 2023 Hyundai Tucson N Line:
Curt Trailer Hitch Receiver - # C94WR
So far (March 2023) this is the only trailer hitch confirmed to fit your N-Line model, but even though it's your only option, it's still a great hitch that I have no issues recommending as the powder coat tends to be very durable and the crosstube is hidden so you get a clean-looking installation.
If you were planning on using this for a bike rack I recommend... view full answer...
The correct Curt Trailer Hitch Receiver for a 2022 Hyundai Santa Fe Hybrid is part # C34ER which offers a bolt-on fit. It has a 2" opening which is great for towing and hitch mounted accessories like bike racks and cargo carriers. I have attached an install video below if you want to follow along. view full answer...
Usually when your owner's manual discourages use of tire chains it is because there is not enough clearance from the tire to the wheel well for you to properly use the chains. If there is not enough space it can lead to damage to your 2016 Hyundai Tcuson.
Sometimes chains are legally required in certain areas, whether the manufacturer recommends using them or not. If you decide to use tire chains, the Thule Easy Fit # TH04115245 has the least amount of clearance needed. view full answer...
Thank you for all of the info! I definitely have a roof rack solution so you can carry some ladders with your 2017 Hyundai Tucson but at this time (February 2022) Rhino-Rack doesn't have a roof rack fitment for your Tucson so we won't be able to install a roof rack using the Rhino-Rack Heavy-Duty Roof Rack Crossbars # RB1250.
As an alternative option I recommend going with the Yakima HD Crossbar roof rack system. The crossbars won't increase the weight capacity of the roof rack since your... view full answer...
If your Tucson already has the factory side rails that run front to back, you can install crossbars using the following parts:
53 inch Thule WingBars, part # TH711400 in silver or # TH711420 in black
Evo raised rail feet, part # TH710401
On the other hand if your Tucson has a bare roof, Thule does NOT recommend installing a roof rack on vehicles equipped with the glass roof.
Yakima does not have a prohibition, but they state that the roof and trim are very soft, and that care should... view full answer...
It would appear that you have the Curt Trailer Hitch Receiver # C12241 on your 2020 Hyundai Tucson. This is a class II hitch that has a maximum tongue rating of 350lbs.
Also the 1-1/4" receiver in your pictures does not have the class I tab as seen in the attached picture.
I recommend the Kuat NV 2.0 Bike Rack for 2 Bikes # NV12G for your Tucson. The rack will tilt away from your Tucson allowing you access to the rear cargo area. When not carrying bikes you can fold up the carrier as... view full answer...
In many cases a bad ground is to blame for this type of issue, but in order to determine the specific problem you'll need to use a circuit tester such as # PTW2993 to test the connector on your Tuscon after disconnecting it from your trailer. Check the wiring going into your harness from your taillights to see if those wires are carrying the correct signals, if not then the issue is with the vehicle wiring. If the signals going to your harness are okay, you'll need to test the signals coming... view full answer...
The Inno Phantom 466 Rooftop Cargo Box # INBRM466WH will fit your 2013 Hyundai Tucson but it may have some contact with the antenna. If you have a naked roof then you need the Thule SquareBar Evo Crossbars # TH712400 with the Evo Clamp Feet # TH710501 and the Fit Kit # TH145134. This setup with the Phantom 466 # INBRM466WH may interfere with your antenna which is why I would recommend getting the SportRack Vista XL Cargo Box # SR7018 because it is a lot shorter but still can carry 18 cu... view full answer...
We have a special rack that is specifically designed for heavy electric bikes. I recommend the Hollywood Racks Sport Rider for electric bikes # HLY84FR. This rack has a capacity of 80 pounds per bike.
Since you have a step thru frame you may need to use an adapter bar like part # UB01 so the hook can secure your bike. view full answer...
If the 2011 Hyundai Santa Fe came with a tow package, it should have already had a wiring harness. The Tow Ready harness # 118258 is a replacement. But, it is still possible for the vehicle to have the connectors for the harness. If the connectors you found are not matching up, it could be the wrong connectors and you will have to continue searching for the right ones.
If the vehicle never had a wiring harness before, or you cannot find the connectors and what to try something else, you... view full answer...
Yes, the Curt T-Connector Wiring Harness # C56348 will work well with your 2015 Hyundai Tucson.
I have attached the installation details for you. view full answer...
That Malone bike rack MPG2124 really does have sort of a backwards lean doesn't it. I looked through the literature for the bike rack and there is nothing stating that you can't use an extension and since that is the only way the rack will clear the back of your 2005 Hyundai Tucson you would have to use an extension.
Like you said, the use of an extension reduces the tongue weight capacity of the trailer hitch by 50 percent. For hitch # 13526 the tongue weight capacity is normally 350... view full answer...
I checked with Thule and the Thule M.O.A.B. Roof Top Cargo Carrier # TH690 is confirmed to fit the factory cross bars of your 2012 Hyundai Tucson if your vehicle has them.
If you do not have a roof rack check out the link I provided that has all of the roof racks we offer for your vehicle. view full answer...
Yes, the Kuat NV 2.0 # BA22B is compatible with the Curt Trailer Hitch Receiver # C13240. With this combination of parts, you will be able to transport two bikes (up to 60 pounds per-bike) on your 2016 Hyundai Tucson. view full answer...
You are correct in that roof racks for the 2021 Hyundai Tucson are not compatible with the panoramic sunroof.
However, there still may be options available to you for your accessories. For example, if you are looking to transport some bikes, you can use a trunk-mounted carrier like the Yakima FullBack 3 Bike Rack, part # Y02633. I've linked to a video review of it below.
Or, if you wanted a cargo carrier, you could combine a hitch and a hitch-mounted cargo carrier. For the hitch, you... view full answer...
You are going to need a roof rack to mount the X-Cargo 20 Rooftop Box on your 2015 Hyundai Tucson.
For your Tucson with raised side rails I recommend the Rhino-Rack Vortex StealthBar Roof Rack # JA7969 (Black) or # JA7950 (Silver). This rack has a flush design to make it look like a factory rack, has built-in locks for security, and uses aero crossbars with rubberized vortex strips to give you a very quiet ride and minimize the amount of wind noise you encounter. The bars are 3-1/8" wide... view full answer...
Yes, the 19X 47 Curt Carrier # C18110 would work great on your 2011 Tuscon. It includes an easy clean mesh floor. This carrier has an angled 3-3/4" rise shank to help with ground clearance. This carrier weighs 30 pounds.
This carrier does not fold up, and because of the lower weight capacities of 1-1/4 inch hitches, none of the 1-1/4 inch cargo carriers that we carry, see link, are designed to fold. This is the case because the folding mechanism can create extra torque on the trailer... view full answer...