Brake controllers aren't vehicle or trailer specific for the most part. The only thing that could cause a problem would be if you have the original Prodigy with the red LED display and your fifth wheel has an electric over hydraulic braking system.
The Prodigy P2 controller, part # 90885 which has a blue LED display IS compatible with electric over hydraulic brakes or straight electric drum brakes.
If you do have the old Prodigy model and you need to upgrade, brake controllers have come... view full answer...
Based on your door way width and the height of your door from the ground being 39 inches the correct MORryde Stepabove is the part # MR85RR that you referenced. This fits the entry door height range of 36-1/2 inch to 42-1/2 inch so your 39 inch doorway height would work great. view full answer...
The correct Solera RV Slide-Out Awning for a slide-out measuring 68" (outside flange to outside flange) is part # LCV000163279 for white or part # LCV000165063 for black. view full answer...
Most RV's do have the same connections for the supply lines for your kitchen faucet. The more important things that you need to know are the base dimensions that you need and whether you need a 1-hole, 2-hole or 3-hole installation.
More than likely the Empire Faucets RV Kitchen Faucet w/ Pull-Down Spout # EM65CR you are asking about will fit. That is because this faucet can work with a 1-hole or 2-hole installation and has 2 separate base plates. Round base plate: 3-3/4" and Oval base... view full answer...
Upgrading your shackle straps and bolts with the # MR26ZR is a great choice to do when flipping your axles with an over under conversion kit since you'll have to remove most of your hardware to complete the flip. You'll need to measure the diameter of your axles with a caliper # PTW80157 to determine which to kit to get.
If you have 2-3/8" diameter axles you'll need part # K71-384-00, and for 3" axles you'll need part # K71-385-00. You won't need any other parts to complete the installation,... view full answer...
The numbers you've provided haven't come back with anything relatable to determining the pin box bolt pattern so I recommend following the steps listed in the attached article below. This will have you measure a few distances but we'll have to take into account the extra length that you stated was added onto the pin box.
If you could send me the measurements you get I'd like to go through them as well and ensure you're getting the correct fit the first time instead of purchasing a pin... view full answer...
The Lippert # LC432698 steps you mentioned are designed to replace steps with a 28 inch mount, so they'll be a good fit. The steps have an overall height of 30-3/4 inches, measured as shown in the provided photo which also shows other dimensions. You can see a product demonstration video by clicking the provided link.
# LC432698 is the current model of the # 358991 RV steps. view full answer...
In order to find the correct wheel studs for your trailer you'll need to measure your existing since there is no way to look this up with the make and model of the trailer. The Trailer Hub Wheel Stud part # 7-122 for example measures 1/2" in diameter 2" long. If this won't work for you, please feel free to provide me with your dimensions or choose from the list linked below. view full answer...
Yes, the Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shock Absorbers # RM-2460-2570 will still work with your 5th wheel even if you flip your axles to have your leaf springs above the axle with a kit like # K71-385-00. I recommend completing both at the same time because you'll have to completely take your suspension apart to install the Comfort Ride.
You'll want to get down by your axles and check the axle tag to see what the capacity is prior to purchasing your Comfort Ride... view full answer...
In order to find the correct SnapPad RV Jack Pads for your 2016 Forest River Wildcat 5th Wheel Trailer you'll need to note the shape and measure. Unfortunately, we can't say for sure exactly which one you need as the manufacturer could have used more than one system on said trailer depending on their inventory at the time as that is just kind of the way trailer manufacturing works. That said, it's only two things you need to do so once you have these you can choose the correct replacement... view full answer...
The Lippert tandem axle lift kit part # RR23QX that you referenced would be a great option to give your 2019 Wildcat 290RL 5th wheel a 2 inch lift. view full answer...
I do have options for you but the Alumi-Tread Manual Pull-Out Step for RVs - 8" Drop/Rise part # LC432698 (358991 is the manufacturer part number) will not fit properly because the opening on your trailer is 28" and the frame of the steps is 28" the fit will be too snug.
I recommend to use Flexco Manual Pull-Out Steps for RVs part # SMFP-2100 which is 27-5/8" wide for a perfect fit on your trailer if you want to utilize the space under the door for a pull out step. There is not a quad... view full answer...
The 9417375592 number you provided unfortunately isn't coming back any active part numbers so we'll need to take some measurements to find the correct step of steps for your trailer. Before measuring make sure that you level your trailer. If you're wanting to stick with pull-out steps then you'll need to measure from the ground up to the mounting brackets for the steps. Next you'll measure the width of the mounting brackets. The # LC432698 you were looking at fits 28" wide mounting brackets... view full answer...
Go To Results