The etrailer Hitch Mounted Spare Tire Carrier - 2" Hitch item # e98ZR will hold your 37”x12.5”x17” spare provided that the trailer hitch on your vehicle is also capable of supporting the combined weight of the spare and the carrier. You will want to check the tongue weight capacity of your vehicle and hitch to ensure it can support a 121 lbs tire and the 15 lbs tire carrier. view full answer...
Yes, it will work on your 2014 Jeep Wrangler Unlimited. Its effectiveness will depend on your vehicle's maximum tongue weight. If your 2014 Jeep Wrangler Unlimited has four doors and the 3.73 or 4.10 axle, the maximum tongue weight of your Jeep Wrangler is 350 lbs. If your Wrangler has the 3.21 axle, your maximum tongue weight is 200 lbs. The Hollywood Racks Sport Rider SE Bike Rack for 4 Bikes - 2" Hitches - Frame Mount, part # HR1400Z, weighs 91.5 lbs in the 4 bike configuration. If your... view full answer...
I would be happy to make a couple for you! To add a hitch to your 2020 Jeep Wrangler, I recommend the Curt item # 13432. This hitch is custom fit and bolts to your Jeep super easy with four included bolts. It's got a 2" receiver with a 3,500 lbs towing capacity and a 350 lbs maximum tongue weight so it will be great for towing or trailer or using accessories like a bike rack or cargo carrier.
I have linked an installation video below to help you get this hitch set up.
For a wiring harness,... view full answer...
The TrailMax Pro fits all Jeep CJ-5, CJ-7 and Wrangler models from 1976-2006, though 1997-2002 models require the installation of a Bestop Seat Adapter Bracket # B51256 and models 2003-2006 require installation of a Bestop Seat Slider with Adapter # B5124801.
There are several configurations of bolt hole dimensions that can be used with this kit.
From side to side it will either measure 13-1/2 inches or 14 inches.
From front to back it will measure 11-1/2 inches, 12-1/2 inches, or 14 inches. view full answer...
The overall measurements are 16.88 inches long x 6.97 inches wide x 9 inches tall for the Bulldog Winch Heavy Duty Portable Air Compressor # BDW36TJ.
The # BDW36TJ is a portable compressor, and there isn't a mounting bracket, so I have not heard of anyone mounting this compressor in a Jeep JK or other vehicle as it is not designed to be mounted on the outside of a vehicle.
For such large tires (this compressor is designed for 40 inch or larger tires) there isn't a compressor system that... view full answer...
I spoke with Bestop and they let me know that the measurement from the top of the backrest to the top of the headrest on the Bestop TrailMax II Fold & Tumble # B3943515 is 17 1/2" and the headrest is adjustable up to 26".
They also added that the headrest measures 5 1/2" from top to bottom. view full answer...
The floor dimesnions of the ArcHaus Camping Tent and Clip-On Interior Screen Room - 10' Long x 6' Wide x 6-1/2' Tall # SAR024-031 are 100-inches long x 64-inches wide.
Check out the attached video to see this tent in action. view full answer...
Both the seat width and depth (front to back) on the Bestop TrailMax II Pro Driver Seat # B3946115 that you referenced is 21 inches. The overall height of the seat is 33 inches; 27 inches for the body and 6 inches coming from the head rest. I have attached an image to assist.
This particular seat is designed to fit the following vehicles:
1976 - 1986 Jeep CJ-7
1997 - 2006 Jeep TJ
1987 - 2003 Jeep Wrangler
1987 - 1995 Jeep YJ
2004 - 2006 Jeep Wrangler all models view full answer...
The distance between the holes that the post fits through on the replacement quick disconnect crossbar part # 910021-00 is 28-1/2 inches. view full answer...
I attached a picture that has the most relevant dimensions of the Curt # 31408. The length of the main crosstube as well as the distance between the mounting holes. The vertical height would be just a little over 2-1/2 inches.
Our hitch manufacturers generally don't like to give out schematics for copyright right reasons but if you have a more specific dimension you are looking for I can get that for you. view full answer...
Yakima doesn't offer the bolt included in the # 8880820 Replacement Rubber Strap individually, only as part of the kit.
The threaded portion of the bolt measures 5mm in diameter by 105mm long with a 1.6 thread pitch. view full answer...
I had the width of the frame bracket on the etrailer.com Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" # e98856 measured and it will be 3-1/16 inches. You may need a small spacer to make this work, but it will be the best option we currently have available. However, this hitch may be rated higher than your bumper, so you will need to make sure of its capacities before loading. view full answer...
The distance between the two tow bar connection points on the etrailer Invisible Base Plate Kit part # e98946 which is a fit for a 1997 - 2006 Jeep Wrangler with standard factory bumper is 24". This will then be compatible with many tow bars like the etrailer SD Non-Binding Tow Bar part # e34ZR. view full answer...
An extension will alter the tongue weight limit. It reduces the hitch tongue weight limit by 50 percent. With the hitches available for a Wrangler, you would either have a 150 or 200 pound tongue weight capacity with an extender, depending on hitch model. view full answer...
You can determine the fit of Thule EasyFold XT part # TH903202 at the rear on your Wrangler Sahara by taking one simple measurement, which is shown in the linked article. Measure from the hitch pin hole to the rear-most part of the vehicle (probably the spare tire). If this measures less than 7-inches then the rack will clear your spare.
If you need more clearance let me know what your hitch pin to spare tire dimension is and I'll see what would work best. view full answer...
Curt's steel cargo carrier # C18152 for 2-inch hitches has a weight rating of 500-lbs. This is what the carrier itself can handle.
The hitch in which it is installed and the host vehicle that hitch is on also need to be rated high enough to handle this weight. When a vehicle, hitch and carrier have different ratings the lowest-rated item determines the overall capacity.
Let's say your 1998 Wrangler can handle 400-lbs of tongue weight (TW is downward force on the hitch). This means that... view full answer...
If your 2005 Winnebago Sightseer 29r has a Rear View Safety backup camera system installed now yes the # RVS-7707721 would attach to what you have easily. If not though, it does come with everything for a new install so it will work either. view full answer...
Yes, you will! For the Demco SBS Stay-IN-Play DUO item # SM99251 to function properly in your 2024 Jeep Wrangler 4xe you will need to use the Roadmaster Universal Stop Light Switch Kit item # RM-751000. It is required because your brake lights do not function when the Jeep is in the tow mode according to Roadmaster. view full answer...
One of the most reliable and easiest supplemental braking systems to install is the Blue Ox Patriot Radio Frequency, Portable Braking System item # BLU37TR. This is a proportional braking system which means it stops or slows your Jeep down with the same force as you are braking in your RV. This is the safest way to stop and it reduces wear and tear on both vehicles and towing components.
The Blue Ox Patriot item # BLU37TR is also a portable system which means you can use it on your next... view full answer...