I spoke with my contact at Convert-A-Ball about the pin weight capacity of their CG Cushioned Gooseneck Coupler. They list a 30,000 lb weight capacity for the coupler and a 4,000 lbs tongue, or pin weight.
Since your 2400 lb pin weight isn't even 10 percent of the 30K coupler capacity, the coupler should handle it just fine. view full answer...
I went to the warehouse and took a couple measurements of the Bulldog BX1 Gooseneck Coupler # BD1289200300. This coupler measures 8 inches x 9 inches (see attached photo). This is taking into account the release handle on the base of the coupler.
Since gooseneck balls are typically on the outside of the truck bed the clearance needed is not given, but I would make sure you have plenty of room for the coupler to move. view full answer...
Yes, and no but I have one that'll do both. The Master Lock Trailer Coupler Lock item # ML389DAT you were looking at will fit a Demco A-Frame Coupler with EZ Latch item # 12660-97SP but not gooseneck couplers.
For a coupler lock that does both you'll need the InfiniteRule Lock for Demco eZ-Latch Trailer Couplers item # IR66FR. view full answer...
For the Bulldog BX1 Gooseneck Coupler # BD1289140300 my contact there advised that the size of flatbed gooseneck ball recess needed for compatibility with this coupler is no less than 6-inches all around from the ball center.
They recommend a recess size of 12 x 12-inches to provide complete clearance. view full answer...
The Ram Gooseneck to 5th Wheel Trailer Coupler Adapter Inner Tube - Square # KPG5-Q30IP is 29 inches long. It is 4 inches square in width so it will fit standard square gooseneck outer tubes.
I have added a link to a video review for you to check out as well of the Ram Gooseneck to 5th Wheel Trailer Coupler Adapter Inner Tube # KPG5-Q30IP. view full answer...
The outer tube of the B&W Defender Locking Gooseneck Coupler # BWGNC4251 is 4-1/2 inches.
I have added a link to a video review for you to check out as well with some more info on the B&W Defender Locking Gooseneck Coupler # BWGNC4251. view full answer...
The inner tube on the Bulldog Gooseneck Coupler # BD0289500300 referenced in your question has an outer diameter of 4 inches and an inner diameter of 3-5/16 inches.
This adjustable gooseneck coupler features a weight capacity of 30,000 pounds and a range of adjustement of 8 inches. view full answer...
I spoke with my contact at Redline and he informed me that the height of this Gooseneck Coupler Head, # 291300, is 2-7/8 inches, the flange is 4-7/8 inches, and the thickness of the lip flange is 3/8 of an inch.
Check out the picture I put together that has these measurements on it. view full answer...
The 4-1/2 inch measurement that is referred to on the Bulldog Gooseneck Coupler - Square # BD0289800300 is the outside measurement of the outer tube, so OD.
I have added a link below to a video review for you to check out as well of the Bulldog Gooseneck Coupler - Square # BD0289800300. view full answer...
I went to our warehouse and took some measurements of the Bulldog BX1 Gooseneck Coupler Inner Tube, part # BD1289050300.
The distance between each hole center-to-center is 2-1/2 inches. The overall length of the coupler is 22 inches. I have attached a photo of the tube with the dimensions noted you can check out. view full answer...
On Bulldog BX1 Gooseneck Coupler # BD1289210300 the distance from the center of the ball hole to the outer edge of the handle is 4 inches. An inner tube such as # BD0288660300 could be a better option since its handle can fold in. view full answer...
I spoke to my contact at Bulldog and he informed me that the outer diameter of the "bump" on the outside of the Bulldog Gooseneck Coupler Head # BDGN240200 is 3 inches. view full answer...
The Bulldog BX1 Gooseneck Coupler - Adjustable Height - Square - 3" Ball - 40,000 lbs # BD1289200300 you were looking at weighs in at 60lbs.
I included a video of the # BD1289200300 for you to take a look at. view full answer...
The Gooseneck Coupler Head Kit, # GC-HEAD, was designed for use with GCPN Series, GCSQ Series, and GCSQTW Series couplers which range in capacity from 25,000 to 30,000 pounds. So the maximum would be 30,000 pounds. view full answer...
The holes themselves on the Bulldog BX1 Gooseneck Coupler Inner Tube # BD1289210300 are 0.86 inches in diameter. The bolt or pin is a 3/4 inch. view full answer...
We currently do not have any videos of this in operation in the environment you mentioned, but I was able to reach out to my tech contact at Gen-Y who provided me with a diagram that you might find helpful to determine if this will work for you.
The # 325-GH-7007 is similar to the # 325-GH-7006 shown in the diagram attached; the difference being that the # 325-GH-7007 has a 2” longer stem on the coupler. All of the height measurements would increase by 2” as I noted on this print. We do... view full answer...
The outer diameter of the Bulldog Gooseneck Coupler tube, # BD0287610300, is 4 inches. The inner diameter of the outer tube on your trailer should be about 2 or 3 tenths larger than 4 inches, which may not be obvious when measuring with a tape measure or ruler.
This coupler should work well with the outer tube on your trailer. If you want to be absolutely sure that it will fit, then you can measure the inner diameter of your outer tube again using dial calipers to verify that it is slightly... view full answer...