It sounds like you're speaking of a mounting panel or bezel for the control knob of a Redarc # RED44FR Tow Pro Elite or # RED24FR Liberty brake controller.
If you go with the # RED44FR Tow-Pro Elite, the universal bezel is included with the controller.
If you use the # RED24FR Tow-Pro Liberty, the bezel is sold separately. I'd recommend using the # 331-TPSI-001 universal mounting panel. This bezel would work perfectly for mounting the control knob in an unused switch knockout. The panel... view full answer...
According to the video for the Furrion # FHO23SACRSS, the depth from the front edge to the back is 16-5/8" then there is a 1" collar that would normally fit into wall opening for the outside vent. So 17-5/8" if you count that. The measurement across the front is 23-1/2" wide, and the height at the back is 4-3/4". I have attached a link to the video below.
Keep in mind that most range hoods extend beyond the cabinet several inches to better draw off the front range burners, so this would... view full answer...
We do indeed offer the exact part you referenced, Blaylock DL-80.
Our part # BLDL-80 is a push-button tubular key door lock for enclosed trailers and is made by Blaylock. This USA-made lightweight aircraft-grade aluminum locks includes two keys and is illustrated in the linked video.
I also included for you a link to our main page for all enclosed trailer accessory items in case you need anything else. view full answer...
I am glad to hear that our website has been helpful for you. I have some good news, we do carry the Curt Class III Trailer Hitch, # C13094, and it is confirmed to fit your 1995 Toyota 4Runner as long as it has 31.5 inch or smaller tires.
The Curt hitch does not require any drilling like the Draw-Tite Class III Hitch, # 75145, because it does not mount to the underside of the frame. Curt has determined that the mounting holes on the side of the frame are sufficient to support this hitch... view full answer...
We do carry the Optronics 8 Inch Glolight. part # STL117RB for the left hand and part # STL116RB for the right hand.
These waterproof lights feature the stop, turn, tail, rear reflex, side marker, side reflex, and license light for the right hand. The # STL117RB has 34 diodes, 28 for the tail light and 6 for the license light. The # STL116RB has 28 diodes. The installation studs measure 2 inches center to center. This light measures 8 X 2-15/16 X 2-5/8 inches. view full answer...
We do indeed offer fan-powered coolers that can be used for either engine oil or transmission fluid. In really rough slow-speed off-road conditions a passive cooler like Derale # D13503 may not get enough air flow through it for it to do its job. In such cases a fan-powered cooler is definitely the way to go. Coolers are not fluid-specific, meaning that any given cooler can be used for engine oil or transmission fluid. The are not vehicle-specific either.
We offer both single-path and... view full answer...
According to my research your 2015 Winnebago Itasca Ellipse Class A motorhome is built on a Freightliner M2 chassis. If your manual indicates this, and that this (impressive) motorhome has an 8K-rated front axle then we do offer a front anti-sway bar from Roadmaster.
Part # RM-1209-116 is a kit that includes the sway bar, bushings, mounting brackets and hardware.
The linked photo illustrates the kit components.
The rear sway bar you referenced fits only Ford F-53-based motor homes. view full answer...
We do offer the Curt # C11326 for the 2007 Saab 9-3, including the sedan and convertible. This is a fit unless it has dual-exhaust or a SportCombi model.
However, this is a light-duty Class I hitche. We offer no Class II hitches for your vehicle.
To a degree the development of hitches for vehicles will be based on the vehicle's capacity, in your case a quoted 3500-lb towing capacity. Certainly, a vehicle with such towing capacity would seem to merit a Class II hitch option. Unfortunately,... view full answer...
The Rightline Gear SUV Tent, # RL110907, is a semi-universal application designed to fit nearly every SUV, minivan and crossover out there. This tent is adjustable to fit different shapes and sizes with an opening measuring 57 inches tall and 21 inches off of the ground. I have attached a picture to illustrate these measurements.
Since your 2014 Ford Transit Connect has the 2 rear doors that open out, most likely they will not be able to fully open to the sides, or what I would call folding... view full answer...
Actually the CE Smith Bolster Bracket for Pontoon Boat Trailers # CE10052-32G that you referenced is available as they have not been discontinued.
We can ship you as many as you need. view full answer...
I have a couple choices for putting a brake controller on your 2016 Jeep Wrangler as there is not a plug and play connector that will plug into your Wrangler even with the factory 7-way and allow you to mount a brake controller in the cab of your Jeep.
A Curt Echo Wireless Trailer Brake Controller # C51180 will plug into your 7-way and allow you to controller your trailer brakes with a smartphone using the Curt Echo app. As long as your 7-way has power going to the charge line connector... view full answer...
Yes, there is a plug-and-play harness for installing the Redarc Tow-Pro Elite Brake Controller # RED63RR in your 2023 Subaru Ascent with tow package.
You just need the Tekonsha Plug-In Wiring Adapter # 3062-P. This adapter connects to the wiring harness included in the Tow-Pro Elite # RED63RR kit, to provide the plug-and-play installation you are wanting. view full answer...
We have exactly what you are needing for your 5th wheel!
The Linxup GPS Tracking Device w/ 4G Service # 300-AT3-S is a GPS tracker that is hardwired in and includes 1 Year of 4G network tracking service. This will be a great choice for a GPS tracker in your 5th wheel. view full answer...
While we don't currently offer the mounting brackets separately I can tell you that you need the Air Lift LoadLifter 7500 XL Air Helper Springs # AL57538 in order for your 2019 Chevy Silverado 2500 to have both a fifth wheel hitch and air springs. There are special instructions listed on page 9 for installing the kit when a hitch mounting bracket is already installed. You can try to reach out to Air Lift directly to see if you can get the correct mounting brackets, but both Air Lift and... view full answer...
Baseplates are intended to only be used on one vehicle and to be considered compromised after removal from the first vehicle so the safest option would be to replace the entire Roadmaster Direct-Connect Base Plate Kit # 1541-5. You can try reaching out to Roadmaster to see if they have a replacement hardware kit but they'll likely tell you the same thing. view full answer...
I do have hitches available for Jeep Wrangler, but we have not confirmed fitment for the 2024 models as of yet (July 2023). We hope to have fitment information within the coming months. view full answer...
The hitch receiver we offer for the 2005 Volkswagen Jetta Wagon can be seen on the link provided. I checked all model years from 2005 through 2014 for the Jetta Wagon and Sportwagen and only 1-1/4-inch Class I hitches are offered by the major manufacturers we represent.
I also checked the availability of hitch receivers for the Nissan Leaf for model years 2011 through 2014. There are no hitches offered by any of our manufacturers for this electric vehicle for any model year.
Hitch manufacturers... view full answer...
AMG does now offer a 1-1/4-inch hitch cover with the University of Kentucky interlocking U and K logo similar to their 2-inch part # AMG100222.
The part number for the 1-1/4-inch hitch cover is # AMG102929.
This new item should be available for ordering on our site within 24-48 hours. view full answer...
There is a special gooseneck plate that fits in the puck system of the Reese Elite Series underbed mounting kit # RP30868. It is Elite Series above-bed gooseneck trailer hitch # RP30845. I have included links to the installation details and a video showing an installation of the under-bed kit # RP30868. view full answer...
I did some research and it looks like the correct cover only for the Roadmaster Sterling tow bar is # RM-055-3. This is the only cover Roadmaster lists for the Sterling All Terrain tow bars. view full answer...
Go To Results