bing tracking image

Filter Questions and Answers:

reset filter

Expert Answers about Nissan


  • Availability of Towing Mirrors for 2013 Nissan Xterra
  • Although we do have towing mirror options for your 2013 Nissan Xterra, a custom slip-on mirror like the # CM10900 you'd looked at isn't available. I'd recommend the K-Source Universal Towing Mirrors, part # KS3891-2. These mirrors attach to the factory mirrors using sturdy ratcheting straps that provide a tight fit for minimal vibration. The 7-3/4 x 5-1/8 mirrors provide a great field of vision when towing. The driver and passenger side mirror are included. If you click the provided...
    view full answer...

  • 2 Trailer Hitch Receiver For A 2021 Nissan Rogue
  • The 2" receiver you want for your 2021 Nissan Rogue is Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C24HR. It has a max tongue weight rating of 525lbs and max towing capacity of 3,500lbs. This offers a simple bolt-on installation process and requires no drilling or welding. All necessary hardware and instructions are included. The hitch you were looking at is NOT a fit for your vehicle.
    view full answer...

  • Recommended T-One 4-Pole Trailer Wiring Harness for 2015 Nissan Pathfinder Without Tow Package
  • We do offer a 4-pole trailer wiring harness for your 2015 Nissan Pathfinder without the tow package, part # 118670 from Tow Ready. This kit includes the harness and relays required to activate your wiring. It also includes a plug-in 4-pole trailer connector. This custom-fit T-One 4-pole connector plugs into your Nissan Pathfinder's wiring harness, which is located just behind the rear bumper, in the center of the Nissan Pathfinder. Once you've plugged in the tow harness, insert 2 of the...
    view full answer...

  • Are Additional Mounting Brackets Needed for the TruXedo TruXport on a Frontier with Utilitrac System
  • There are not any mounting brackets for the TruXedo TruXport # TX292301 to attach to the utilitrac system in your 2019 Nissan Frontier. The reason there are not any brackets is because the TruXedo TruXport # TX292301 is a top mount cover, so it will actually install above the utilitrac system. Therefore, you would not need mounting brackets for the utilitrac system.
    view full answer...

  • Wheel Offset For 12 Inch Trailer Wheels
  • The Dexstar Steel Mini Mod Trailer Wheel - 12" x 4" Rim - 5 on 4-1/2 - Chrome # AM20152 has no offset or a zero offset. Most trailer wheels are a zero offset. We currently only carry two 12 inche wheels with any offset . The Dexstar Steel Mini Mod Trailer Wheel w/ Offset - 12" x 4" - 5 on 4-1/2 - Silver # AM20165 has a -0.5 inch offset as does the Dexstar Steel Mini Mod Trailer Wheel w/ Offset - 12" x 4" - 5 on 4-1/2 - White # AM20149. I've attached a video to assist. The negative...
    view full answer...

  • Availability of 5-Piece Tan Floor Mats for 2004 Nissan Pathfinder Armada
  • We have floor mats that are a confirmed fit for your 2004 Nissan Armada, but none that come in a 5-piece set. For the front, I recommend the WeatherTech All-Weather rubber mats # WTW222TN. Then for the middle you would use the # WTW20TN. For the rear, we have the WeatherTech Cargo Liner # WT41066. These are all in tan.
    view full answer...

  • Available Ladder Racks for 2017 Nissan Titan XD
  • We do have many ladder rack fits for the 2017 Nissan Titan XD for all three bed lengths and bed configurations but none happen to come from Adarac. I linked a page to show you all of them; just click on the Select Vehicle Style menu tool near the top of the page to choose you bed length and configuration and then you'll see only the products that fit your specific setup. As an example, if you happen to have the 5-1/2 Foot Bed with Utili-Track System Rola offers a fixed rack system # 59799...
    view full answer...

  • Replacement Bunk Bracket for Magic Tilt Boat Trailer
  • The best option we have for what you are looking for is the CE Smith Heavy Duty Vertical Bunk Bracket part # CE10161GA which measures to be 8" tall. Although we do not have a 7-1/4" tall bunk bracket, the above can be made to work for you. In order to attach this to your trailer frame you can use the CE Smith U-Bolt part # CE15283GA.
    view full answer...

  • Brake Controller Wiring Adapter for 2015 Nissan Frontier
  • What you're looking for is called a Brake Controller Wiring Adapter, and we do indeed have one for your 2015 Frontier. You'll need part # 3050-P, which has a flat plug on one end that would plug into the back of your Prodigy brake controller, and the other end would plug into the connector under the dash of your truck. Nissan typically places the connector for the brake controller under the dash to the left of the steering column. Near the top of the emergency brake pedal, look for a...
    view full answer...

  • Trailer Wiring Harness for 2015 Nissan Rogue
  • We do indeed have a trailer wiring harness available for your 2015 Nissan Rogue, part # 118480. I've linked you to the installation instructions as well as to an install video showing the harness being installed on a 2015 Rogue.
    view full answer...

  • Black Custom Fit Cover for a 2015 Nissan Pathfinder
  • We do have some black covers that are custom fit for your 2015 Nissan Pathfinder. The top of the line outdoor cover is Covercraft WeatherShield HP Custom-Fit Outdoor Vehicle Cover - Black Item # C18097PB. This is an all-weather cover that breathes to allow moisture to escape, it sheds water, and it is soft on the inside to protect the vehicle paint. A slight step down from there is Covercraft Ultra'tect Custom-Fit Outdoor Vehicle Cover - Black Item # C18097UB. This is also an all-weather...
    view full answer...

  • Is There a Replacement Air Spring for a Firestone 4118 Air Spring Kit on a 2020 Nissan Pathfinder
  • I was able to verify with the manufacturer that the correct replacement air spring for the Firestone Coil-Rite Air Helper Springs # F4118 on your 2020 Nissan pathfinder is air spring 6118. The bad news is that the replacement air springs are no longer available. While it is far from ideal, if you are needing a replacement air spring for the 4118 system, you'd have to get the entire # F4118 kit or find one second hand.
    view full answer...

  • Do You Offer The EcoHitch Hidden Trailer Hitch Receiver in a 1-1/4" Opening For a 2018 Nissan Leaf?
  • Currently we only offer the EcoHitch Hidden Trailer Hitch Receiver # 306-X7221 with a 2" opening. The Reducer # e58YR can be used allowing you to use a 1-1/4" hitch accessory. The 2" opening will allow for a greater amount of hitch accessories to be used as it is the more commonly used size. I recommend installing the Curt T-Connector Vehicle Wiring Harness # C56227 when you install the receiver. This will allow you to use Auxiliary Lights # C53201 with any hitch mounted accessories which...
    view full answer...

  • Hitch Mounted Cargo Carrier Recommendation for a 1-1/4 inch Hitch
  • Actually the Curt Cargo Carrier part # C18145 that you referenced can fit 1-1/4 inch hitches like what you have so it would work well for you. It can fit both Class I and Class II hitches so it should work well. Check out the review video I attached for this carrier as well.
    view full answer...

  • Availability of AirLift Coil Helper Springs for 2012 Nissan Maxima
  • They aren't a confirmed fit simply because the fit hasn't been tested. The air bags used on the AirLift # AL60822 measure 3.45 inches in diameter at the widest point and 8.75 inches tall. To determine if these bags will fit, measure the inside diameter and available inside height of the spring while the suspension is at normal ride height, i.e. not up on jack stands or a lift. If your measurements tell you that this particular kit won't fit, AirLift offers several different semi-universal...
    view full answer...

  • Roadmaster Tail Light Wiring Kit for Nissan Versa
  • The RoadMaster Bulb and Socket Set for Tail Light Wiring Kits, # RM-155-2 is not vehicle specific. This is designed to work with Roadmaster Tail Light Wiring Kits such as # RM-155 if needed. The full kit that includes the connectors and wire is # RM-155 for incandescent. If your vehicle has LED lights, you will need # # RM-152-LED. To properly install you will need a silicone sealant such as # LT37467 and drill a 1 inch diameter hole in the rear of your taillight assemblies. Ensure you...
    view full answer...

  • Trailer Hitch for 2012 Nissan Quest Towing Pop Up Camper
  • A Class III hitch like the Curt part # C13078 that fits your 2012 Nissan Quest would be your best option for towing a small pop up camper with since it has a higher towing capacity. Then for trailer wiring your best option would be the Tekonsha part # 118547 as it has the easiest install install and most reliable converter box. If you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch...
    view full answer...

  • Availability of Trailer Wiring Harness for 2014 Nissan Frontier
  • I spoke with my contact in the Tech Services department at Tow Ready. He tells me that they have recently determined that the # C56225 Curt Wiring Harness carries over to the 2014 Frontier models. The kit includes the 4-pole connector that plugs into the connector on the drivers side frame rail alongside the spare tire and the jumper and relays to activate the factory tow package. The relays and jumper plug into a connector located behind the toe kick in the passenger-side foot well as...
    view full answer...

  • Are Custom Towing Mirrors Available for 2006 Nissan Armada
  • Although custom towing mirrors are not available for a 2006 Nissan Armada, I do have a great universal option for you. Take a look at the K-Source Universal Clip-On Towing Mirror, # KS3891. This extra-large mirror fits over most mirrors measuring 4-1/2 to 11-1/2 inches tall to give you an extended rear view. Installation and removal is a breeze since no tools or hardware are required. I have attached a couple videos for you.
    view full answer...

  • Availability of Complete Replacement Trailer Wiring Harness for 1989 Wells Cargo Enclosed Trailer
  • We do not offer complete OEM-style trailer wiring harnesses for specific trailers but we do carry all of the various connectors, plugs, sockets and other components required to re-wire a trailer from stem to stern. I have provided two links to our main pages for trailer connectors as well as two comprehensive articles on trailer wiring and troubleshooting.
    view full answer...