The Blue Ox Base Plate Kit # BX1143 is a confirmed fit for the 2019 Jeep Cherokee, no exceptions listed for the Trailhawk package. I have attached a link to installation video.
. view full answer...
Here is the EcoHitch Hidden Trailer Hitch Receiver # EH83VR which you saw in the YouTube video being installed on a 2017 Jeep Renegade. I have also linked the installation video below for you to see from our website.
I recommend installing the Curt T-Connector Vehicle Wiring Harness # C56274 when you install the receiver. This will give you a 4-way flat connector if you ever need to tow a small trailer or need Auxiliary Lights # C53201 for a hitch mounted accessory which impairs the view... view full answer...
From what you describe I suggest the Brake Buddy Stealth Supplemental Braking System, # HM39530. This is a proportional brake control system. That applies the towed jeep's brakes when activated at the same time and with the same intensity as those in your tow vehicle. This is a 1-Time setup, no need to remove, reposition, or reset system as the main unit installs in an out-of-the-way spot and automatically functions when tow vehicle and Jeep are connected. This will have it's own brake... view full answer...
We have the Adapter for Jeep D-Ring Bumper Mounts to Roadmaster Motor Home Mount Tow Bars, # RM-035-1. While we do not have the measurements to confirm that it is a fit for your specific bumper, please review those measurements for fitment to the adapters. These attach to 1" thick shackle mounts where the D-rings are attached. Simply remove D-rings from bumper and attach tow bar to shackle mounts on bumpers that are approved for flat towing. Designed to fit 7/8" and 1" diameter mounting... view full answer...
You can get the Tekonsha Prodigy P3 Trailer Brake Controller # 90195 by itself for your 2015 Jeep Grand Cherokee. Since the P3 includes its own pigtail you will be able to wire it to your factory pigtail. The Tekonsha Plug-In Wiring Adapter # TK93VR is convenient as there is no soldering or wire connections necessary on your end, you just plug in both ends and you are ready to go. This helps prevent some other issues that occur as I have seen the wiring miss-wired as they try to connect... view full answer...
The Bestop upper door sliders # B5178733 is a fit for your 2005 Jeep Wrangler SE. Although, the dark tan wouldn't be the same color or surface texture as the dark khaki you referenced. I called our representative at Bestop and they mentioned the dark khaki diamond soft top for your 2005 Jeep Wrangler SE has been discontinued and is no longer available.
Your dark khaki diamond surface texture is like a basketball or trampoline to the touch whereas the dark tan # B5178733 is more of a fabric... view full answer...
Please note that all winches we sell, whether manual hand-crank types or AC-powered units like the Dutton-Lainson StrongArm Electric Davit Winch # DL25032, are not to be used as hoists for lifting, supporting or transporting people, or for handling loads over areas where people could be present.
This safety statement should be considered carefully as there could potentially be liability exposure
if you use a product in an application specifically excluded by the manufacturer. Therefore... view full answer...
I attached a link to a page that has all of the base plate kits we offer that will fit all models of the 1998 Jeep Grand Cherokee so any of them would fit your Laredo model. I would recommend the Roadmaster kit part # 1411-2 as it has removable arms so that when you aren't flat towing the vehicle you wouldn't have the brackets hanging off the front.
In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting, and supplemental braking to flat tow your... view full answer...
Thank you for the photos of your trailer taillight lenses. I have a solution for you, but we do not have replacement taillight lenses to fit the existing Wesbar lights on your 1998 Jayco Eagle. Many of the Wesbar lights used on Jayco trailers are now discontinued and replacement parts are not available.
Since replacement lenses aren't available, the next best option is to replace the taillights. In place of your existing wraparound taillights, I like the Wesbar LED Wrap-Around Tail Light,... view full answer...
Yes, the Rampage Retractable Rocker Guard Step Bars # RA88732 that you referenced are a confirmed fit for your 2016 Jeep Wrangler Rubicon Unlimited so it would fit and work well. view full answer...
We do offer a 4-pole wiring harness for a 1991 Jeep Cherokee, Tekonsha # 119178KIT, which you can convert to a 5-pole. No 5-pole versions are offered.
But we do have a wiring adapter to convert a 4-pole to a 5-pole, part # 20036 from Tow Ready. Installation is simple: plug in the adapter to the 4-pole and then splice the blue wire into the reverse light wire on the vehicle. A quick-splice connector is included. view full answer...
The # BL7026128 is for the previous generation Wrangler JK, but since the 2020 Gladiator is based on the Jeep Wrangler JL platform, it won't work. The correct BOLT hood lock for the Gladiator would be part # BLT34FR. Please note the installation instructions, a small hole will need to be made in the grille of your Gladiator for the lock to work. view full answer...
Unfortunately, we do not currently (4/14/23) have any brake controllers that have a harness available for your 2023 Jeep Grand Cherokee 4xe Overland.
To use a brake controller like the Redarc Tow-Pro Liberty Brake Controller # RED24FR, you would need to use the Universal Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers # RED69FR. view full answer...
Yes, we have the NOCO Genius UltraSafe Industrial Battery Charger # 329-GX4820 for 48 volt applications. This is a 20 amp charger with 6 charging profiles that is safe for lead acid, AGM and Lithium batteries.
A NOCO AC Port Plug # 329-GCP1 can be added if you want to mount the charger on the golf cart and run an extension cord to the cart when you need to charge. view full answer...
Performance monitors are available for your 2015 Jeep Grand Cherokee with 5.7L V8 Hemi and you can see both of these products from Edge by clicking on the linked page. These two Edge Insight monitors share the same functionality, but part # EP84130 includes a touch screen function for easier operation. Both this and the # EP84030 allow you to track key engine parameters and also to read and clear diagnostic trouble codes (DTCs). Neither offers alternate engine tunes; no tuners are yet offered... view full answer...
We do have a hitch for the 2023 Jeep Cherokee that will protrude through the bumper with the Draw-Tite Class 3 Hitch # DT28MR. This receiver will go right in the center area of the bumper, right behind the plastic removable panel. This helps with ground clearance, and in my opinion, looks much cleaner on the back of the vehicle.
I have linked the manufacturer instructions below. The instructions include a few really good pictures showing the location of the hitch once installed. view full answer...
Unless you specifically need hub piloted wheels, you can use a wheel with a pilot hole that has a larger diameter like the Dexstar Steel Spoke Trailer Wheel # AM20422. This wheel has a pilot diameter of 3.19". I did look at all of our 15" 5 on 4-1/2 wheels and unfortunately none of them have the exact pilot diameter you are looking for. view full answer...
I would recommend to use the Mighty Cord 4-Way to 6-Way Adapter, part # A10-6034VP.
If you only want to use the basic lighting functions provided by the 4-Way (left/right turn, brake, and running lights) then all you will need to do is plug the 4-Way end of the # A10-6034VP adapter, into the vehicle 4-Way. The trailer 6-Way will then plug into the 6-Way receptacle on the adapter. You will also need to ground the white wire on the adapter to the vehicle frame at a clean and corrosion free... view full answer...
Thank you for the details about your Wrangler and for your included photo.
A rear-mounted spare tire on any vehicle can make it a challenge to find a compatible cargo or bike carrier. In your case you need a 2-inch hitch carrier that provides at least the 9-inches of clearance from the hitch in hole to clear the rear edge of your spare. We always provide this important clearance measurement on all our hitch bike racks and cargo carriers and the method to check this is shown in the linked... view full answer...
In order to connect a Blue Ox tow bar to a Demco tabless base plate kit like the # DM9519340 that you referenced all you need is the adapter part # DM9523127 and you'd be set. The two cannot connect directly without this adapter. view full answer...
Go To Results