All of the trailer hitch receivers that are designed for your 2005 Dodge Durango, like the Draw-Tite # 75162 you referenced, have a maximum tongue weight capacity of 600 pounds unless you're using a weight distribution. They increase to 900 pounds tongue weight with weight distribution, as long as your vehicle is rated that high. Since you're planning to tow up to 5,000 I recommend weight distribution anyway. Anytime your loaded trailer is at least 50 percent of the tow vehicle's weight... view full answer...
We do have universal towing mirrors that will fit your 2001 Dodge Durango but unfortunately there are no slip-on options available.
The K-Source Universal Dual Lens Towing Mirrors # KS3990 are what I recommend going with because they feature a clip-on design that is compatible with just about every mirror style out there (4-1/2" to 11-1/2" tall) and they have dual lenses for a customizable view behind you. We haven't tested these directly with an '01 Durango but if you check out the product... view full answer...
Yes there are roof racks that you can use on both of your vehicles.
If your 2018 Dodge Durango has a naked roof then you can use Rhino-Rack Vortex Aero Crossbars # RRVA137B-2, Legs # RRRLKVA, and Fit Kit # DK299.
If your 2018 Honda CR-V also has a naked roof then you can use the SAME Rhino-Rack Vortex Aero Crossbars # RRVA137B-2 and the SAME Legs # RRRLKVA, but you will need a different Fit Kit # DK284 for the CR-V.
If your 2018 Dodge Durango has the factory roof rails then the only... view full answer...
Usually, people want the exact opposite; for it not to blink with either turn signal. The reason that it blinks with just the right turn signal is because the 4-Way connector for a trailer has combined brake and turn signals and only one wire and a ground is used to power the light, in this case the green right turn/brake light wire. view full answer...
To pick out a replacement grease seal you will need to measure the diameter of the spindle where the grease seal rides with a digital or dial caliper and then need to measure the hub bore where the current seal rides. With those two dimensions we can pick out the correct seal that you would need.
I attached a link to a page that has all of the grease seals we carry. You will need to select your inner and outer diameter from the filters on the page and the correct seals will be listed.
We... view full answer...
We currently do not offer a custom fit slip on towing mirror for the 2004 Dodge Durango. These custom mirrors, part #10702, are designed for the full sized Ram. Even though the mirrors look similar they are different and that difference prevents the mirror from being installed securely.
We do have quite a few universal fit towing mirrors that may work for you. For a mirror mounted option, I really like the K-Source Universal Clip-On mirror, part # KS3891. Another good option is the Cipa... view full answer...
The exhaust systems that we have for the 1999 Doge Durango, see link, follow the same path as the factory exhaust which does happen to be rear exit with a single pipe. To make any additional modifications you would need to take the vehicle to a muffler shop or a place that does customization on vehicles.
If you are looking just for exhaust tips then we have several options available. I have included a link to the exhaust tip main page for you. view full answer...
We do offer a hitch-mount trike carrier that fits the 2-inch hitch on your 2005 Dodge Durango. The Hollywood Racks Sport Rider Trike Carrier # HR1000Z-R-TRKADP will work with trike wheelbases up to 74-inches and trikes up to 100-lbs.
I checked the Worksman website's specs for your SBST-3CB. Unfortunately they do not indicate the bike weight so I contacted them. The bike weighs about 180-lbs so unfortunately it is well beyond the capacity of any rack we offer. The folks at Worksman indicated... view full answer...
The Hidden Hitch 87522 is no longer available because that brand name has been discontinued, but the identical hitch under the Draw-Tite brand name, made by the same parent company (Horizon Global) is available. That hitch is Draw-Tite part # 75081 and it is confirmed to fit on the 2003 Dodge Durango.
We also have the correct 4-pole wiring harness, part # 118334, installation of which is shown in the linked video. view full answer...
We do offer two different brands of 2-inch Class III rear trailer hitch for your 1999 Dodge Durango.
Curt # C13097 and Draw-Tite # 75081 are your options. Between the two I suggest the Curt for its slightly lower cost. I was not able to confirm the hitch part 75115 that you referenced.
We also offer a front-mount hitch from Curt, their # 31097; this is also a 2-inch receiver.
All hitches include the required installation hardware and instructions, which are linked for you. I did also... view full answer...
I double-checked with Curt, Draw-Tite and Hidden Hitch for a front-mount hitch receiver for your 2001 Dodge Durango with 2WD. Neither Draw-Tite nor Hidden Hitch have a front-mount for your 2WD Durango but my contact at Curt confirmed that their 2-inch square tube hitch # 31080 fits all version of the 2001 Durango, including your 2-wheel-drive.
The hitch bolts on using included hardware and it requires no drilling. The linked instructions and help article will list the basic tools you'll... view full answer...
Any hitch-mount cargo carrier that includes a swing-away mechanism is going to be out of your price range. The Yakima Exo enclosed carrier # Y62VR includes the convenience feature of being able to swing away from the vehicle when loaded but since this feature requires very strong construction it also comes with a higher price and a substantial weight of about 100-lbs.
I do not recommend trying to build a swing away carrier; any mishaps would expose you to both potentially lost or damaged... view full answer...
The three hitches made for your 2018 Durango include the etrailer model # e98901 which will be a little less visible than either the Curt model # C13182 that you referenced or the similar Draw-Tite # DT38MR. They all have visible crosstubes but the matte black finish on the etrailer model # e98901 makes it blend into the vehicle better than the other two.
This hitch has a no-drill install that is rated only 3 out of 10 on the install difficulty scale. Please note that this hitch still... view full answer...
You can install the Tekonsha 7-way part # TK22113 in your 2019 Dodge Durango R/T. It comes with everything needed including the brake controller wiring that you looked for under your dash as well.
One really easy brake controller install solution I recommend is the Curt Echo part # C51180 which basically just plugs into an active 7-way and once synced with your smart phone is ready to tow. view full answer...
For your 2015 Dodge Durango, I'd recommend the K-Source Universal # KS3891 Clip-On Towing Mirror. The mirror uses ratcheting rubber straps that allow the mirror to securely attach to your factory mirrors, resulting in a nearly vibration-free fit. As you can see by looking through the customer reviews, the mirror is very highly rated. The mirrors are sold individually, so for a pair you'd need to order two of them.
I checked with our towing mirror manufacturers, CIPA, Longview Mirror, and... view full answer...
We do offer replacement driver and passenger mirrors for your 2014 Dodge Durango, parts # KS60190C and # KS60189C, but there are no custom-fit towing mirrors for it. In this case you can use universal-fit types such as clip-on mirror set # KS3990, or a door mount # 11650. The door mirrors can give you a very wide rearview perspective on your trailer but can take some getting used to since they will mount away from your primary mirrors. view full answer...
Yakima offers their Universal MightyMounts kit # Y03590 to allow most of their roof-mounted accessory carriers to be used with factory crossbars like those on your 1999 Dodge Durango. The kit works on crossbars up to 4-inches wide x 1-1/2-inches tall. Mighty-Mounts are not compatible with the Sidewinder roof-mount bike rack but work with most other Yakima carriers. view full answer...
Yes! The 44.5 Qts AO Coolers Ballistic Nylon Cooler Bag is available in the following colors:
Black - # AC28FR
Red - # AC36FR
These are all the same bag, just in different colors! view full answer...
The AO Coolers Saddlebag Coolers for Bikes # AC43FR is only available in black. This can actually be helpful though because black is easier to clean off and it won't show dirt or mud that might be kicked up by your bikes as much as other colors will. view full answer...
All 10-inch electric brake assemblies we offer can be seen on the linked page. These are all for 10 x 2-1/4-inch drums and all use an integrated 4-bolt mounting scheme. You can find 5-bolt mounts in the 12 x 2-inch size but not the 10-inch diameter brakes. The second link will show you 12 x 2-inch brakes that do have a 5-hole mount.
Some of these have a dual mounting hole pattern that can fit both 4- and 5-bolt flanges. You might double-check your hub/drum interior dimensions and then... view full answer...
Go To Results