The non-splice trailer wiring kit part # 119250KIT that you referenced is a confirmed fit for your 2014 BMW X3 and will not require any hardwiring since it uses sensors to tap into your vehicle's wiring. This connector does not carry the brake controller circuit for activating trailer brakes though so you'd have to look into converting this to a matching connector like what your trailer has. For that we have a 5-way round socket like part # PK11502 which matches what you mentioned having... view full answer...
The Replacement Cradle Strap for Thule Helium Pro or Apex XT Bike Racks - Qty 1 # 1500056003 has a length of 12 inches. I am not familiar with any strap that is 18-24 inches in a style like this, so you may want to consider a cam strap like the etrailer Cam Buckle Cinch Straps w/ Buckle Protectors - 1" x 13' - 293 lbs - Qty 2 # E98876-2 or a CargoBuckle Mini G3 Retractable Ratchet Straps - 1" x 6' - 466 lbs - Qty 2 # IMF111640. view full answer...
The only trailer hitch receiver that is available for your 2001 BMW 325 Wagon is the Curt # C11174 which is a Class I with a 1-1/4 inch receiver. Keep in mind that you will want to check the weight capacities of your BMW as well as stay within the 2,000 lb Gross Trailer Weight and 200 lb Tongue Weight capacities of the Curt hitch.
You will also need to choose the correct ball mount for your application. I have attached a link to our selection of Class I hitch ball mounts that you can choose... view full answer...
I have a possible solution for you to carry 2 bikes on your 2018 BMW 4 Series convertible, but there are not any trunk-mounted bike racks for your convertible so you will want to go the route of using a hitch-mounted bike rack. If you don't have a trailer hitch receiver yet then I would go with Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # C11367 which offers a simple bolt-on installation.
For a bike rack, I recommend the Thule DoubleTrack Pro 2 Bike Platform Rack - 1-1/4"... view full answer...
There are no 5-pole wiring harness kits for your 2016 BMW X5, but we do have 4-pole harnesses that can be used with an adapter that will allow you to connect to your trailer that has 5-pole wiring with a circuit for the reverse lockout on the trailer coupler.
I recommend the ZCI harness # 119250KIT that you referenced, which is a heavy-duty unit. I linked an install video for an X5. A helpful article is included too.
With either harness you can add on the Tow Ready 4 Pole to 5 Pole Trailer... view full answer...
Curt does offer a hitch for your 2018 BMW X4, their 2-inch Class III model # C13316. This installs using included hardware as outlined in the linked instructions. This USA-made hitch is designed to have a very clean and unobtrusive appearance on the X4.
This is accomplished by it having a concealed cross tube and by it using the X4's bumper mounts as the installation point rather than the frame. Frame-mounted hitches tend to be more visible. But the discrete look of the Curt # C13316... view full answer...
We do have a hitch for your 2021 BMW X5 M. However, the correct hitch depends on what you mean by M. If you have an actual M performance model, which would be the M or the M Competition, then the correct hitch is the # SH64MR. If you plan on using it for towing then you will need the # SH22MR which comes with the towing kit.
If you have the X5 with the M Sport Package, the correct hitch is the # SH89VR. For the hitch with the towing kit you will need the # SH25VR. If you get the hitch... view full answer...
Thule offers a solution for your vehicle. If you prefer the square crossbars, you can construct a rack using the following parts:
SquareBars, part # TH712200 or WingBar # TH711200
Foot Pack # TH710601
Vehicle Specific Fit Kit, part # TH186007
A fairing is also available, part # TH72WV.
If you would prefer the WingBar crossbars with the elliptical profile, use the following:
47 inch WingBars, part # TH711220 for black or # TH711200 in silver
Rapid Podium Foot Pack for Aero Bars, part... view full answer...
The Curt Class I Trailer Hitch Receiver you referenced, part # C11756, is a fit for the BMW 328i sedan but not for the convertible version. Curt does not offer a hitch receiver for your vehicle.
I also checked with Draw-Tite and Hidden Hitch, two other prominent hitch makers, but neither of these hitch manufacturers offers one for your car.
In cases where a hitch is not offered for a given vehicle the reason is typically that the engineers have determined that either there is insufficient... view full answer...
We do offer a hitch for your 2018 BMW 530i with the xDrive system, Curt's 1-1/4-inch Class I model # C11478 with which you can use ball mount # C45521. You will need to add the hitch ball, one of the size required by the coupler on your trailer. Check the coupler for a sticker or stamping in the housing that indicates the required ball size, either 2-inch # A-82 or 1-7/8-inch # A-80. You will also need either a hitch pin # F-4 or a hitch lock # C23517 to secure the ball mount in the hitch.
If... view full answer...
WeatherTech does indeed offer cargo area floor liners that are compatible with the cargo area of your 2011 BMW X3. They're available in black, gray or tan.
Black, part # WT40497
Gray, part # WT42497
Tan, part # WT41497 view full answer...
I have a way for you to transport some cargo, but when I checked with all of our hitch manufacturers (December 2021) none of them have had a fit for a BMW 430i xdrive since the 2020 model.
For your application I recommend going with a roof rack instead. If you go with the Thule WingBar Evo roof rack system you'll be getting something that is easier to install and comes with one of the most innovative crossbars on the market. If you're good going this route then you'll need the following:
47"... view full answer...
The instructions for the Curt hitch part # 13077 state to discard the steel bumper beam. The hitch's crosstube takes the place of that beam. view full answer...
When installing a trailer wiring harness you really want to run the wire up the vehicle battery. Doing this allows the trailer wiring to be totally isolated from the vehicle's wiring. In the event of a short this prevents any damage on the vehicle's wiring. On a new BMW you really do want to have the circuit protection. Also, if you don't run the wire to the battery the warranty of the ZCI Harness part # 119250KIT would be voided.
I attached a help article on routing the power wire for... view full answer...
For your 2014 BMW 328d sedan you can use Curt trailer hitch # C11367. If you plan on doing some light duty towing then the correct ball mount to use is # C45521. For a 1-7/8 inch ball use # 19256 and for a 2 inch ball use # 19258. For trailer wiring you will need to visit a BMW dealership.
If you want to use the hitch for an accessory such as a bike rack or cargo carrier then you have to make sure the accessory is rated for use with a Class I trailer hitch. Also, with a bike rack, you... view full answer...
For your 2014 BMW 335i xDrive Sedan with a single muffler we can offer a 1-1/4-inch Class I hitch from Curt, their part # C11367. This hitch installs without drilling and includes the required hardware. Basic tools, including a torque wrench like # ALL944001are required for installation. The bumper and heat shield need to be temporarily removed for hitch installation.
I have also linked for you our main page for all accessories for your 2014 BMW 335i. view full answer...
Yes, the Stealth hitches we offer are the same and kitted only in 2" receiver option but we do have the 1-1/4" Receiver Attachment, # 391RR1 available separately.
For your 2022 BMW 330i xDrive I recommend the Stealth Hitches Hidden Rack Receiver, # SH34VR along with the 1-1/4" Receiver Attachment, # 391RR1 for accessories such as bike racks and carriers. The # SH68VR option includes the towing kit along with a 4-way connector that will stow beneath your vehicle, near the trailer hitch.... view full answer...
I checked with Curt, Draw-Tite and Hidden Hitch brands and none offers a trailer hitch for your 2006 BMW 325Ci convertible. Hitches are offered only for the 2006 325i and 325xi sedans and for the xi Sports Wagon. I am sorry we could not get you the item you wanted.
But if you are looking for a bike rack, we do offer trunk-mount carriers that are confirmed to fit on your 2006 BMW 325Ci convertible. Just click on the link provided to see convertible-friendly 2- and 3-bike racks from Thule,... view full answer...
The trailer hitch you referenced, Draw-Tite Sportframe # 24857 is a correct fit for the 328i Sedan version but not your 2-door coupe. Currently we do not have any hitches for your vehicle. Hitches will have their rated capacity only when installed as intended by the manufacturer on the specific vehicle for which they were designed. We cannot recommend any attempt to alter the hitch or adapt it to fit on a different vehicle than intended.
However, we can help you with a trunk-mount bike... view full answer...
Go To Results