Expert Answers about Jeep Bumper

• Westin Diamondstep Bumper For A 1989 Jeep Comanche
• Hey Stephen. In addition to the Westin Fey Diamondstep Rear Bumper, you will also need the Custom Installation Kit # 97900. This kit will contain all of the brackets and hardware needed to install the bumper. For a 1989 Jeep Comanche, the correct Westin Diamondstep bumper will be as follows: - Westin Fey Diamondstep Rear Bumper - Black Powder Coated Steel # 63000
  view full answer...


• Blue Ox Base Plate Kit for a 2023 Jeep Wrangler Unlimited with Paramount Rugged Ridge Bumper
• Thanks for reaching out, Donald! The Paramount Rugged Ridge winch bumper on your 2023 Jeep Wrangler Unlimited covers the place where a typical base plate kit will install so you'll need to use D-Ring mounts, granted your bumper is approved for this. These are the Blue Ox kits that you'll use depending on your D-Ring size: - 7/8" # BX88357 - 1" # BX88358 I'm not seeing that your bumper is rated for flat towing but you'll want to double check with your vendor to make sure. If your bumper...
  view full answer...


• Are Support Brackets Needed To Haul Bikes On The Rear Bumper Of A 2018 Keystone Passport Ultra Lite
• To determine if support brackets are needed to accommodate the weight of the bikes/rack you'd be placing in the Curt RV Bumper 2" Trailer Hitch Receiver # E-100 you would need to contact Keystone and ask what the weight capacity of the rear bumper is. You could also reach out to a local fabrication/welding company and have them take a look/weld on some extra supports to ensure that the bumper can handle the weight.
  view full answer...


• Does the Bumper on a 2024 Ford Bronco Outer Banks Need to be Removed to Install a Curt Trailer Hitch
• Hey Ed, it looks like you won't need to remove the bumper to install the Curt Trailer Hitch Receiver # C76WR on your 2024 Ford Bronco Outer Banks. This hitch is just going to bolt onto your Bronco's frame requiring no welding or trimming, and includes all the mounting hardware needed for install.
  view full answer...


• How Can I Hook A Blue Ox Tow Bar To A 2017 Jeep Wrangler Unlimited Sport
• Hello Barbara. If your 2017 Jeep Wrangler Unlimited has D-rings on the bumper, you can use the Blue Ox D-Ring Adapters to connect your jeep to your tow bar. You can use the # BX88358 adapters for 1" D-rings or the # BX88357 adapters for 7/8" D-rings. If you do not have a D-ring bumper you will need to use a frame-mounted base plate. For the 2023 Wrangler Unlimited you will need part # BX1126. Keep in mind that this is for the base model with the standard factory bumper. If your Jeep is...
  view full answer...


• Non-Binding Tow Bar Recommendation for 2010 Jeep Wrangler with D-Rings on Bumper
• Hey David, thanks for reaching out! I recommend using the Roadmaster Falcon All-Terrain Tow Bar - Non-Binding - 6,000 lbs # RM-522 for your 2010 Jeep Wrangler because it has that non-binding feature and is more practical both when it comes to weight rating as well as pricing and functionality. To make this compatible with the D-Rings on your Jeep bumper you'll need part # RM-035 for 3/4" Mounts or the part # RM-035-1 for 1" Mounts.
  view full answer...


• Replacement Side Marker Light For a 1993 Fleetwood Southwind RV Motorhome
• While I have no way to help you with the front bumper or the grill I may be able to help you with the side parking light. You will most likely need to find the bumper and grill from an RV salvage yard or a vintage trailer parts dealer. In looking at images it appears you have lights like the Optronics # MCL36AB. I have no way to verify this as the manufacturer did not keep public records on their vehicles. The light is 2-7/8" wide and 2-1/8" tall. If this does not match what you have please...
  view full answer...


• What Rear Vehicle Modifications are Needed to Install Curt Hitch 2024 Chevy Blazer EV
• Hey Alex, to install the Curt hitch part # C63ZV you only need to trim the lower plastic cover that you referenced and not the bumper cover at all. Basically you need to put an opening in the plastic cover to allow the hitch opening to pass through.
  view full answer...


• Parts Needed to Flat Tow 2022 Jeep Gladiator Rubicon
• Hey Mike, so the easiest to use base plate kits are the Blue Ox ones so for your 2022 Jeep Gladiator Rubicon the base plate you would want is the part # BLU53FR which fits the factory steel and plastic bumpers. If you went with an aftermarket bumper I can't guarantee this would work though. In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting, and supplemental braking to flat tow your vehicle. One of the most popular compatible tow bars is the...
  view full answer...


• 2021 Jeep Wrangler Sport recommended Blue Ox Parts for Flat Towing with Off-Road Bumper
• Thanks for all the details Jason! To get a Blue Ox tow bar to fit with the shackles on your 2021 Jeep Wrangler Sport you'll need either the 7/8" # BX88357 or 1" # BX88358 Adapters, but just be sure to check with the manufacturer of your off-road bumper because not all bumpers with shackles are rated for flat towing. With that being said, here are the parts I recommend for your application: - Tow Bar Adapters 7/8" # BX88357 or 1" # BX88358 - Blue Ox Avail Non-Binding Tow Bar # BX7420 ...
  view full answer...


• Do 2023 Ford F-150 OEM Wheel Well Liners Need to Be Altered to Install Air Lift Air Bag Kit
• Your 2023 Ford F-150 factory wheel liners will not need to be modified when installing the Air Lift LoadLifter 5000 system, even if you have the Max Tow Package. The air bags install directly under your truck frame and behind the leaf spring stack so you'll have plenty of spacing between any wheel well liners and the air bag kit. I recommend picking up the Air Lift LoadLifter 5000 Ultimate Air Helper Springs with Internal Jounce Bumpers # AL67PD for your application because of the internal...
  view full answer...


• Recommended Hitch for a 2018 Audi Q7 and Installation Instructions
• I sure do! The instructions for the Curt Trailer Hitch item # C13277 detail in step 7 and 8 how to trim the bumper of your 2018 Audi Q7 and avoid the sensors for the lift gate. I have linked them below. If you are planning on towing you will also need a wiring harness item # C59236 and a ball mount kit item # C45534.
  view full answer...


• Is Fascia Trimming Required to Install Blue Ox Base Plate 2023 GMC Sierra 1500
• Hey Bryan, when installing the Blue Ox base plate kit part # BLU35XR on your 2023 GMC Sierra 1500 you do not need to trim the holes on the bumper/fascia where the base plate fits through. The current size works just fine.
  view full answer...


• Replacement 7-Way Mounting Bracket Solution for 2012 Chevy Tahoe
• Hey John, so the factory 7-way mounting bracket of a 2012 Chevy Tahoe would have been built into the rear bumper so if that's rusted away what you'd need to do is use a bracket like the part # PK12711U which attaches to the lower rear bumper edge and has the universal 7-way mounting bolt pattern. If your 7-way mounts using a twist lock style attachment you'd also need to replace it with the part # A10-7072VP.
  view full answer...


• Winch for 2020 Jeep Wrangler Unlimited Rubicon
• A winch like the Bulldog Winch Standard Series Off-Road Winch # BDW10041 would suit your needs but I only have pricing on the winch which as shown on the product page. We have a network of dealers which I can direct you to but we don't know their installation costs to give you any kind of estimate. Check out the link below which lists all of our local installers. I went ahead and used 49346 for the zip code but you can change it if a different zip is better. You will also need to decide...
  view full answer...


• Does Aries Pro Series Grille Guard Have Fender Coverage
• That is a very valid question Durwin, but the Aries Pro Series Grille Guard part # AA2170000 does not have coverage for the fenders. Just the bumper and grille.
  view full answer...


• Parts Needed to Flat Tow 2024 Ford Bronco
• Hey Darin, so the Roadmaster Nighthawk tow bar part # RM-676 is a really great tow bar that will work great for you so what you would need is the correct Roadmaster direct connect style base plate kit to use with it. If you have the standard bumper you'd just need the # RM79RR or if you have the Ford Performance bumper you'd need the part # RM92ZR. For lighting you can use the diode kit, # RM-15267, and not have to worry about cutting into the taillight housing. This will splice into...
  view full answer...


• Where Would Magnetic Tow Bar Lights Attach on Vehicle that Has Soft Top
• Hey Cheryl, on a vehicle with a soft top like your 2009 Jeep Wrangler you'd need to attach magnetic lights like the part # C6304 to the bumper of since that's where metal would be.
  view full answer...


• Does Install of Curt Hitch for 2024 Honda Pilot Touring Require Honda Panels
• The Curt hitch part # C22HR that you referenced hangs below the rear bumper of your 2024 Honda Pilot Touring so it would not require any additional panels, Pete.
  view full answer...


• Replacement US CAR Connector Plug for a 2015 Chevy Silverado 1500
• Thanks for all of the details, Jeremy! It sounds like you're needing the 4' Pigtail Wiring Harness for Pollak Replacement 7-Pole RV Socket # PK11998 which you'll splice into your trailer wiring and give yourself a new US CAR plug to connect the socket to. You should be able to look at the back side of the bumper on your 2015 Chevy Silverado 1500 and trace the wiring to a good spot where you can cut it to make your Pollak wiring connections. Just be sure to match the wires from the Pollak...
  view full answer...